xdavidhu/langhost

👻 A LAN dropbox chatbot controllable via Telegram

langhost's Issues

A remote wipe command

How difficult would it be to add a command that would wipe the SD card?

For example, you send the command /wipe
it responds "Are you sure?"
you respond "yes"
it preforms "sudo dd if=/dev/urandom of=/dev/mmcblk0" or something similar

some bugs

I'm having some constraints:

1. if run / replaceimg then the target can not connect to the internet.
2. If the target using antivirus it will be detected as ARP Poisoning at run / mitm.
3. Network will decrease speed.

that's some of the obstacles I'm having.

Replacing images

/replaceimg ip doesn't work

📷 Please send the image you want to replace others with:
*.jpg

lanGhost, [01.03.18 15:04]
Starting attack with ID: 1

lanGhost, [01.03.18 15:04]
Type /stop 1 to stop the attack.

lanGhost, [01.03.18 15:04]
🔥 Replacing images for 172.28.ip.212...

lanGhost, [01.03.18 15:04]
🔥 Attacks running:

ID: 1 ➖ replaceimg ➖ 172.28.ip.212

Terminal:
[+] Routing 172.28.ip.212 into mitmdump with iptables...
[+] ARP Spoofing 172.28.ip.212...

Bot says, that everything works fine. But actually nothing happens, during the attack.

tested on http sites, like bbc.com

/scan does not give a response

I went through the setup process and everything looks to be working fine. Tried to use the /kill command and it worked well. I did however notice that the /scan command did not return a proper response.

All it does is say "Scanning network..." but then fails to return an error message or result.

I noticed the following error in the SSH terminal:

From cffi callback <function _verify_callback at 0x75247b28>:
Traceback (most recent call last):
  File "/usr/local/lib/python3.5/dist-packages/OpenSSL/SSL.py", line 309, in wrapper
    _lib.X509_up_ref(x509)
AttributeError: module 'lib' has no attribute 'X509_up_ref'

'Perhaps iptables or your kernel needs to be upgraded.'

What i need to do to fix it? Im installed Kali from Microsoft Store.

image

And can I use lanGhost over WiFi?

WSL

WSL doesnt support ip_tables so i cant run lanGhost.
Can you fix it or i need to wait for support to be added?

No module named 'telegram'

I have installed everything correctly but every time I type in Telegram API key I get a;

[I] Loading...

Traceback (most recent call last):
File "./setup.py", line 83, in
from telegram.ext import Updater, MessageHandler, Filters
ImportError: No module named 'telegram'
root@DietPi:~/lanGhost#

Could you help me out here old chap?

LanGhost over WiFi

hi guys!
Could u make a short guide how to configure langhost over wifi?
Due to when i run command /scan , bot says: ❌ Whooops, something went wrong... Please try again.

I need to set up wpa_supplicant to connect to the network automatically first.
But how to run it... i mean with what options? it does not have GUI.

So I run Network Manager and connected to SSID and marked 'autoconnect'. But still have same error

ok, pls help guys

thanks in advise!

(ask) not issue

whether the project is final or not resumed ..?

Types of pi's usable

What types of raspberry pi's has this been tested on?

Does this take a significant amount of power or it is it lightweight? Would this work on a raspberry pi zero w work?

Btw this is an amazing idea! Keep up the good work dude

target can not surf

all attacks cause the target can not surf.
Is it because all sites already use https or there is an error in your script so that there is a jam.
according to my logic should lanGhost be able to throw into the internet when switching DNS.

Contributions

Hi David,

I really like this project, do you accept PRs?

Setup is only for Debian-based systems

I have an Arch Linux installed on my PC. I wanted to install lanGhost, but it uses APT and searches for /etc/network/interfaces. Where is other distros support?

Error while getting network info

Hello
After starting lanGhost.py, it repeatedly says Error while getting network info.
I checked the interface, it is enp0s3.

sudo: screen: command not found
sudo: screen: command not found
[I] Error while getting network info. Retrying...
[I] Running iptables setup...
[I] Scanning for new hosts...
[I] Telegram bot started...
[I] Error while getting network info. Retrying...
[I] Scanning for new hosts...
[I] Error while getting network info. Retrying...
[I] Scanning for new hosts...
[I] Error while getting network info. Retrying...
[I] Scanning for new hosts...
[I] Error while getting network info. Retrying...
And this can repeat forever.
Ubuntu 16.04 LTS. Running on VirtualBox

HTTPS support

Do you have any plans to add https support to 'mitm' and 'replaceimg' functions?

Failed request from my bot

Hello, i'm on step 3 in setup.py and when I send verification code to my bot he does not answer. Bot API is valid. What's wrong?

lanGhost in Termux

Can the lanGhost package be installed on Termux?