yudistrange/charts

Hazelcast Enterprise Helm Chart Repository

Hazelcast Enterprise Helm Charts

This is a repository for Hazelcast Enterprise Helm Charts. For more information about installing and using Helm, see its README.md. To get a quick introduction to Charts see this chart document.

Note that the structure and style of this repository and the Helm Charts themselves is similar to the Official Helm Chart repository.

The Helm Chart for Hazelcast Open Source in the the official Helm Repository.

We also have specific instructions for IBM Cloud.

Quick Start

Add the Hazelcast Enterprise repository:

$ helm repo add hazelcast https://hazelcast.github.io/charts/
$ helm repo update

Then, you can install the charts by:

$ helm install hazelcast/<chart>

The available list of charts can be found in the stable directory.

Please note that if hazelcast-enterprise chart is used, hazelcast enterprise license key must be passed to the helm chart as below. You can contact [email protected] for a trial license key.

helm install --set hazelcast.licenseKey=$HAZELCAST_ENTERPRISE_LICENSE_KEY hazelcast/hazelcast-enterprise

Helm & Tiller

If you don't have helm in your system, you can download and install it from helm github project page.

Once you install helm command line tool, you need a Tiller service running in your kubernetes cluster. Installing Tiller as simple as executing init command.

$ helm init

Verify that Tiller Version is returned.

$ helm version --server

Troubleshooting in Kubernetes Environments

If you have Helm and Tiller is installed in your system. You can start deploying Hazelcast Helm Charts to your kubernetes cluster. This is the list of some common problems you might face while deploying Hazelcast.

Why is Management Center EXTERNAL-IP not assigned?

Minikube is a tool that makes it easy to run Kubernetes locally. However, It does not come with LoadBalancer so Management Center can't be accessible with external IP.

You can see below that EXTERNAL-IP is pending when you install hazelcast helm charts via helm install and execute kubectl get services right after.

NAME                                                   TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)          AGE
service/kubernetes                                     ClusterIP      10.96.0.1       <none>        443/TCP          3h
service/littering-pig-hazelcast-enterprise             ClusterIP      10.98.41.236    <none>        5701/TCP         3h
service/littering-pig-hazelcast-enterprise-mancenter   LoadBalancer   10.104.97.143   <pending>     8080:30145/TCP   3h

However, you can still reach Hazelcast Management Center with the http://MINIKUBE_IP:30145/hazelcast-mancenter for the case above. $(minikube ip) is the command to retrieve minikube IP address.

"cluster-admin" not found

In some Kubernetes Clusters, RBAC might not be enabled by default so you might end up seeing RBAC related error while helm install.

Error: release funky-woodpecker failed: roles.rbac.authorization.k8s.io “funky-woodpecker-hazelcast-enterprise” is forbidden: attempt to grant extra privileges: [PolicyRule{APIGroups:[“”], Resources:[“endpoints”], Verbs:[“get”]} PolicyRule{APIGroups:[“”], Resources:[“endpoints”], Verbs:[“list”]}] user=&{system:serviceaccount:kube-system:tiller 411da847-9999-11e8-bf5e-ba0dc6d88758 [system:serviceaccounts system:serviceaccounts:kube-system system:authenticated] map[]} ownerrules=[] ruleResolutionErrors=[clusterroles.rbac.authorization.k8s.io “cluster-admin” not found]

In that case, you need either enable debug or pass --set rbac.create=false into your helm install command.

Why is Management Center Pod in Pending state?

NAME                                                            READY     STATUS              RESTARTS   AGE
dining-serval-hazelcast-enterprise-0                            1/1       Running             0          50s
dining-serval-hazelcast-enterprise-1                            0/1       Running             0          19s
dining-serval-hazelcast-enterprise-mancenter-5f56d785dc-h5slc   0/1       Pending             0          50s

If you see your Management Center in a Pending State as above, you can try a few things for troubleshooting.

Firstly, you can check if Persistent Volume and PersistentVolumeClaim are already bound.

$ kubectl get pv
NAME                                       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS    CLAIM                                                  STORAGECLASS   REASON    AGE
pvc-7f4baaff-a63d-11e8-9df7-0800277c0239   8Gi        RWO            Delete           Bound     default/mouthy-alpaca-hazelcast-enterprise-mancenter   standard                 4d

$ kubectl get pvc 
NAME                                           STATUS    VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS   AGE
mouthy-alpaca-hazelcast-enterprise-mancenter   Bound     pvc-7f4baaff-a63d-11e8-9df7-0800277c0239   8Gi        RWO            standard       4d

You can see they are bound as above. If they are not, this is the list of potential problems you might be having.

Creating Storage Class

Some Kubernetes Providers do not offer default storage class so you have to create one and pass it to helm installation.

Create storage.yaml file and apply via kubectl apply -f storage.yaml

kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
  name: standard
provisioner: kubernetes.io/aws-ebs
parameters:
  type: gp2
  zones: us-west-2a, us-west-2b, us-west-2c

Use storage class name defined in the storage.yaml file in helm installation.

$ helm install --set mancenter.persistence.storageClass=standard hazelcast/<chart>

Persistent Volume Availability Zone

AWS EKS requires your volume to be in the same Availability Zone as Kubernetes Nodes that Management Center Pod is running. Otherwise, Management Center Pod will be stuck in pending state. You can check failure-domain.beta.kubernetes.io/zone labels on the Kubernetes Nodes and Persistent Volume and see PersistentVolume is in one of the node's Availability Zone.

$ kubectl get no --show-labels
NAME                                            STATUS    ROLES     AGE       VERSION   LABELS
ip-192-168-101-236.us-west-2.compute.internal   Ready     <none>    42m       v1.10.3   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=t2.medium,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=us-west-2,failure-domain.beta.kubernetes.io/zone=us-west-2a,kubernetes.io/hostname=ip-192-168-101-236.us-west-2.compute.internal
ip-192-168-245-179.us-west-2.compute.internal   Ready     <none>    42m       v1.10.3   beta.kubernetes.io/arch=amd64,beta.kubernetes.io/instance-type=t2.medium,beta.kubernetes.io/os=linux,failure-domain.beta.kubernetes.io/region=us-west-2,failure-domain.beta.kubernetes.io/zone=us-west-2c,kubernetes.io/hostname=ip-192-168-245-179.us-west-2.compute.internal

$ kubectl get pv --show-labels
NAME                                       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS    CLAIM                                                  STORAGECLASS   REASON    AGE       LABELS
pvc-539749c4-9f31-11e8-b9d0-0af5b0ce3266   8Gi        RWO            Delete           Bound     default/dining-serval-hazelcast-enterprise-mancenter   standard                 30s       failure-domain.beta.kubernetes.io/region=us-west-2,failure-domain.beta.kubernetes.io/zone=us-west-2c

You need to reinstall hazelcast helm chart until you have both PersistentVolume and Kubernetes Node in the same Availability Zone.

Persistent Volume Creation Time

Creating Persistent Volume in some Kubernetes Environments take up to 5 minutes so you can wait for sometime to see if Persistent Volume is created.

$ kubectl get pv --watch

If you see Persistent Volume created, your Management Center Pod will be turning Running state soon.

How to find us?

In case of any question or issue, please raise a GH issue, send an email to Hazelcast Google Groups or contact as directly via Hazelcast Gitter.