zha-ng / zha-map Goto Github PK
View Code? Open in Web Editor NEWBuild ZHA network topology map.
License: MIT License
Build ZHA network topology map.
License: MIT License
Using pizigate.
2020-06-25 15:45:19 ERROR (MainThread) [custom_components.zha-map] failed to scan 00:15:8d:00:03:af:5f:49 device: [0x0000:0:0x0031]: Message send failure
HA v. 0.114.4 (on Raspberry Pi 4)
added repository:
Says Unknown
No installation option in Add-On store
Hey there,
While trying to set up the visualization map (which loads ok), I am getting this error in the logs while re-scanning the zha_map.
Logger: custom_components.zha_map.neighbour
Source: custom_components/zha_map/neighbour.py:98
Integration: ZHA Network Map (documentation)
First occurred: 2:25:59 PM (2 occurrences)
Last logged: 2:26:47 PM
[00:12:4b:00:1e:72:1a:dd]: neighbour 00:12:4b:00:1e:72:1a:6b is not in **'zigbee.db'**
I have no idea which the X device is. Might be a BASICZBR3 which i initially paired to my ZHA then fried it (due to my great electrician skills) and threw it away.
The only occurrence I find of its ieee id is in a neighbours file where three BASICZBR3 are listed (two are active).
I tried deleting the part of this device but it keeps re-appearing whenever i run the zha_map scan.
Where should i search to find and delete the residuals of this device that i wont use again?
Here is the full neighbours file:
All the other 4 devices are powered devices in my mesh which i recognize and are up and working (including my sonoff flashed gateway) - shown in comments below.
{
"ieee": "00:12:4b:00:1e:72:1a:dd", ##BASICZBR3
"nwk": "0xaf2c",
"lqi": null,
"device_type": "Router",
"manufacturer": "SONOFF",
"model": "BASICZBR3",
"offline": false,
"neighbours": [
{
"ieee": "60:a4:23:ff:fe:42:5a:63", ## Gateway
"nwk": "0x0000",
"lqi": 9,
"pan_id": "cc:cc:cc:cc:05:96:2b:c8",
"device_type": "Coordinator",
"rx_on_when_idle": "Unknown",
"relation": "Parent",
"new_joins_accepted": "Unknown",
"depth": 0,
"model": "EZSP",
"manufacturer": "Silicon Labs",
"offline": false,
"supported": true
},
{
"ieee": "00:12:4b:00:1e:72:1a:6b", ## UNKNOWN
"nwk": null,
"lqi": 0,
"pan_id": "cc:cc:cc:cc:05:96:2b:c8",
"device_type": "Router",
"rx_on_when_idle": "On",
"relation": "Child",
"new_joins_accepted": "Unknown",
"depth": 2,
"model": null,
"manufacturer": null,
"offline": false,
"supported": true
},
{
"ieee": "00:15:8d:00:03:3b:10:72", ## XIaomi Smart Plug
"nwk": "0x1888",
"lqi": 0,
"pan_id": "cc:cc:cc:cc:05:96:2b:c8",
"device_type": "Router",
"rx_on_when_idle": "Unknown",
"relation": "None_of_the_above",
"new_joins_accepted": "Unknown",
"depth": 255,
"model": "lumi.plug",
"manufacturer": "LUMI",
"offline": false,
"supported": true
},
{
"ieee": "00:12:4b:00:1e:72:8e:b1", ##BASICZBR3
"nwk": "0x01c3",
"lqi": 0,
"pan_id": "cc:cc:cc:cc:05:96:2b:c8",
"device_type": "Router",
"rx_on_when_idle": "Unknown",
"relation": "None_of_the_above",
"new_joins_accepted": "Unknown",
"depth": 255,
"model": "BASICZBR3",
"manufacturer": "SONOFF",
"offline": false,
"supported": true
}
]
}
Should i perhaps re-pair the main device of this file?
Thanks in advance.
The last update with EZSP the map module is loading OK in HA but i getting this then doing one scan:
Log Details (ERROR)
Logger: homeassistant.components.websocket_api.http.connection.140197815383088
Source: custom_components/zha_map/neighbour.py:80
Integration: Home Assistant WebSocket API (documentation, issues)
First occurred: 9:42:03 AM (1 occurrences)
Last logged: 9:42:03 AM
'EZSPCoordinator' object has no attribute 'neighbors'
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 137, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1315, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1350, in _execute_service
await handler.func(service_call)
File "/config/custom_components/zha_map/__init__.py", line 66, in scan_now_handler
await builder.preempt_build()
File "/config/custom_components/zha_map/__init__.py", line 125, in preempt_build
await self.build()
File "/config/custom_components/zha_map/__init__.py", line 138, in build
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 75, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 80, in scan
for neighbor in self.device.neighbors:
AttributeError: 'EZSPCoordinator' object has no attribute 'neighbors'
The "old" version (pre zigpy 0.24.0 changes (#25)) looks working OK with EZSP.
I hope i have getting the updates right then its my testsetup for "Billy" and not old dev parts is left in the system.
(pip3 show zigpy Name: zigpy Version: 0.24.1
pip3 show bellows Name: bellows Version: 0.20.2)
Perhaps its one bellows issue and not ZHA-MAP.
Edit: Samantha-uks zigzag is working nice looks little like one christmas tree but nice ;-))
Hi,
I used ZHA-MAP on my local Home Assistant RPI.
Because of performance issues on the RPI. I moved my HA to ESX.
I used the https://github.com/lukas-hetzenecker/home-assistant-remote to connect my RPI HA to my ESX HA.
but I'm unable to get the ZHA-MAP to work.
That's because the ESX RPI doesn't have the ZHA integration and the zha-map: in configuration file.
is their a possibility to get this to work?
`Logger: homeassistant.core
First occured: 1:14:34 (4 occurences)
Last logged: 10:01:17
Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/config/custom_components/zha_map/init.py", line 137, in build
await self.scan_device(seed)
File "/config/custom_components/zha_map/init.py", line 226, in scan_device
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 115, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 123, in scan
zdo_t.ZDOCmd.Mgmt_Lqi_req, idx, tries=3, delay=1
File "/usr/local/lib/python3.7/site-packages/zigpy/util.py", line 88, in retry
r = await func()
File "/usr/local/lib/python3.7/site-packages/zigpy/device.py", line 194, in request
result = await asyncio.wait_for(req.result, timeout)
File "/usr/local/lib/python3.7/asyncio/tasks.py", line 449, in wait_for
raise futures.TimeoutError()
concurrent.futures._base.TimeoutError
Соединение потеряно. Повторное подключение ...
`
`Logger: homeassistant.core
First occured: 1 марта 2020 г., 20:59:33 (13 occurences)
Last logged: 10:01:17
Error doing job: Exception in callback SerialTransport._read_ready()
Traceback (most recent call last):
File "/usr/local/lib/python3.7/asyncio/events.py", line 88, in _run
self._context.run(self._callback, *self._args)
File "/usr/local/lib/python3.7/site-packages/serial_asyncio/init.py", line 106, in _read_ready
self._protocol.data_received(data)
File "/usr/local/lib/python3.7/site-packages/zigpy_cc/uart.py", line 140, in data_received
self._api.data_received(frame)
File "/usr/local/lib/python3.7/site-packages/zigpy_cc/api.py", line 180, in data_received
obj = ZpiObject.from_unpi_frame(frame)
File "/usr/local/lib/python3.7/site-packages/zigpy_cc/zpi_object.py", line 76, in from_unpi_frame
payload = cls.read_parameters(frame.data, parameters)
File "/usr/local/lib/python3.7/site-packages/zigpy_cc/zpi_object.py", line 149, in read_parameters
res[name] = buffalo.read_parameter(type, options)
File "/usr/local/lib/python3.7/site-packages/zigpy_cc/buffalo.py", line 69, in read_parameter
elif type == ParameterType.LIST_UINT32:
File "/usr/local/lib/python3.7/enum.py", line 349, in getattr
raise AttributeError(name) from None
AttributeError: LIST_UINT32
Соединение потеряно. Повторное подключение ...
`
Would it be possible to make this HACS compliant? As far as i can tell, it just needs to move from dev to master. But i am not certain, as there is a closed issue in the HACS repo also.
hacs/integration#965
HA latest on real core (venv), coordinator is Tasmotized ZbBridge in ZHA mode. Neighbor files report false LQI versus ZHA data (and real world distance) e.g. device with LQI=255 reports 0 :-(
No big problem of course but very nice ZigZag reports false colors for LQI :-)
Done some zha_map service rescans but no luck...
If needed can show LQI differences in neighbor file vs ZHA data.
Best, JR
This was working on 115.1
The map no longer loads. The date in the top left corner is 1970-01-01
Logger: homeassistant
Source: custom_components/zha_map/neighbour.py:131
First occurred: 10:29:07 AM (1 occurrences)
Last logged: 10:29:07 AM
Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/config/custom_components/zha_map/init.py", line 137, in build
await self.scan_device(seed)
File "/config/custom_components/zha_map/init.py", line 226, in scan_device
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 115, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 131, in scan
neighbors = val.NeighborTableList
AttributeError: 'Neighbors' object has no attribute 'NeighborTableList'
Hello,
First off im using Home Assistant 0.117.2. I will state that this has not worked for me since at least .116.0 but it might have been before.
I have zha_map loading fine it seems because im also using the zigzag module and the zha_network_card module and those seem to work fine.
However, I added the card to a panel view.. but all it shows me is a date at the top (1970-01-01 00:00:00) and a search box. So it seems the module loaded, but just isnt displaying anything.
My config is:
views:
- panel: true
badges: []
cards:
- type: 'custom:zha-network-visualization-card'
Any ideas what might be happening here?
Thanks very much.
PyPa has a GitHub Action for publishing pre-built distribution packages to PyPI.
Consider adding PyPa workflow in the same unified way as other zigpy libraries, see:
and
Also, consider adding a long description to PyPi index by pointing to the README.md
Keeping this and other information the same in all zigpy libraries can help unify them.
Hello.
ZHA-MAP is not worked on 0.114.4?
I have this error:
2020-10-01 12:03:19 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.2880318360] 'Weather' object has no attribute 'neighbors' Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 125, in handle_call_service await hass.services.async_call( File "/usr/src/homeassistant/homeassistant/core.py", line 1308, in async_call task.result() File "/usr/src/homeassistant/homeassistant/core.py", line 1343, in _execute_service await handler.func(service_call) File "/config/custom_components/zha_map/__init__.py", line 66, in scan_now_handler await builder.preempt_build() File "/config/custom_components/zha_map/__init__.py", line 125, in preempt_build await self.build() File "/config/custom_components/zha_map/__init__.py", line 138, in build nei = await Neighbour.scan_device(device) File "/config/custom_components/zha_map/neighbour.py", line 78, in scan_device await r.scan() File "/config/custom_components/zha_map/neighbour.py", line 83, in scan for neighbor in self.device.neighbors: AttributeError: 'Weather' object has no attribute 'neighbors'
Supervisor 207
HassOS 3.11
Home Assistant 0.106.5
When I add zha_map: to my configuration.yaml file, Home Assistant will not restart the server either through the configurator or the server controls. No errors are thrown and the log is empty. Forcing a server restart caused HA to no longer boot correctly and required restoring an old snapshot.
I tried changing it to zha-map: and got the usual 'Component not found' error.
I have zha: configured through the config file if that matters. It was the only way I could get it to work as the integrations page zha component didn't work for my device (HUSBZB-1)
First off, this is absolutely awesome. Fantastic work!
So, I have installed and did my first scan. Some of my devices are showing as offline when they are online. This is one, it's a Sengled bulb. According to my ZHA devices panel, it last checked in at 2020-01-23T17:34:42 and is able to respond to commands. I have a few others that are doing the same thing. I know it's possible for sleepy devices to not wake up for a scan, but mains powered should always wake up, right?
Hi,
I tried to use your component but I got an error like undefined record.device_type and so on.
It seems that that HA version use a difference version of zigpy you expected because I had to change some lineof code as the follow patch file.
fix_for_HA_0_115_2.zip
Hi,
zha_map.scan service scan all devices in my network, but from unknown reason it continuously scan "TRADFRI control outlet" again and again.
command for raw WS return 0 devices
hass-cli raw ws zha_map/devices
and error is created in logs:
2020-02-16 19:08:15 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/usr/local/lib/python3.7/site-packages/websockets/client.py", line 101, in read_http_response
status_code, reason, headers = await read_response(self.reader)
File "/usr/local/lib/python3.7/site-packages/websockets/http.py", line 139, in read_response
status_line = await read_line(stream)
File "/usr/local/lib/python3.7/site-packages/websockets/http.py", line 213, in read_line
line = await stream.readline()
File "/usr/local/lib/python3.7/asyncio/streams.py", line 496, in readline
line = await self.readuntil(sep)
File "/usr/local/lib/python3.7/asyncio/streams.py", line 588, in readuntil
await self._wait_for_data('readuntil')
File "/usr/local/lib/python3.7/asyncio/streams.py", line 473, in _wait_for_data
await self._waiter
concurrent.futures._base.CancelledError
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/lib/python3.7/asyncio/tasks.py", line 630, in _wrap_awaitable
return (yield from awaitable.__await__())
File "/usr/local/lib/python3.7/site-packages/websockets/client.py", line 547, in __await_impl__
extra_headers=protocol.extra_headers,
File "/usr/local/lib/python3.7/site-packages/websockets/client.py", line 290, in handshake
status_code, response_headers = await self.read_http_response()
File "/usr/local/lib/python3.7/site-packages/websockets/client.py", line 103, in read_http_response
raise InvalidMessage("did not receive a valid HTTP response") from exc
websockets.exceptions.InvalidMessage: did not receive a valid HTTP response
When I unplugged that device, scan finished, and devices are visible in WS call
2020-02-16 20:00:46 WARNING (MainThread) [custom_components.zha_map] Couldn't scan 08:6b:d7:ff:fe:07:7e:0d neighbours
2020-02-16 20:00:46 DEBUG (MainThread) [custom_components.zha_map] Finished neighbour scan pass. Failed: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 20:00:46 DEBUG (MainThread) [custom_components.zha_map] 00:15:8d:00:03:f1:3b:15 (LUMI lumi.weather) was not found in the neighbours tables
part of the log, full is in attachement
2020-02-16 19:58:59 DEBUG (MainThread) [custom_components.zha_map] continuing neighbour scan. Neighbours discovered: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 19:59:16 DEBUG (MainThread) [custom_components.zha_map.neighbour] [08:6b:d7:ff:fe:07:7e:0d]: 'Mgmt_Lqi_req' timedout
2020-02-16 19:59:16 DEBUG (MainThread) [custom_components.zha_map] Saving /config/neighbours/neighbours_086bd7fffe077e0d.txt
2020-02-16 19:59:16 DEBUG (MainThread) [custom_components.zha_map] continuing neighbour scan. Neighbours discovered: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 19:59:33 DEBUG (MainThread) [custom_components.zha_map.neighbour] [08:6b:d7:ff:fe:07:7e:0d]: 'Mgmt_Lqi_req' timedout
2020-02-16 19:59:33 DEBUG (MainThread) [custom_components.zha_map] Saving /config/neighbours/neighbours_086bd7fffe077e0d.txt
2020-02-16 19:59:33 DEBUG (MainThread) [custom_components.zha_map] continuing neighbour scan. Neighbours discovered: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 19:59:50 DEBUG (MainThread) [custom_components.zha_map.neighbour] [08:6b:d7:ff:fe:07:7e:0d]: 'Mgmt_Lqi_req' timedout
2020-02-16 19:59:50 DEBUG (MainThread) [custom_components.zha_map] Saving /config/neighbours/neighbours_086bd7fffe077e0d.txt
2020-02-16 19:59:50 DEBUG (MainThread) [custom_components.zha_map] continuing neighbour scan. Neighbours discovered: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 20:00:07 DEBUG (MainThread) [custom_components.zha_map.neighbour] [08:6b:d7:ff:fe:07:7e:0d]: 'Mgmt_Lqi_req' timedout
2020-02-16 20:00:07 DEBUG (MainThread) [custom_components.zha_map] Saving /config/neighbours/neighbours_086bd7fffe077e0d.txt
2020-02-16 20:00:07 DEBUG (MainThread) [custom_components.zha_map] continuing neighbour scan. Neighbours discovered: [08:6b:d7:ff:fe:07:7e:0d]
2020-02-16 20:00:24 DEBUG (MainThread) [custom_components.zha_map.neighbour] [08:6b:d7:ff:fe:07:7e:0d]: 'Mgmt_Lqi_req' timedout
My versions:
HA is 0.105.4
zha_map is latest
Devices and logs:
neighbours.zip
home-assistant.log
Logger: custom_components.zha_map.neighbour
Source: custom_components/zha_map/neighbour.py:98
Integration: ZHA Network Map (documentation)
First occurred: 8:45:12 AM (6 occurrences)
Last logged: 8:47:25 AM
[00:17:88:01:04:fd:7c:e5]: neighbour f0:d1:b8:00:00:10:c4:63 is not in 'zigbee.db'
[00:17:88:01:04:17:cc:fe]: neighbour f0:d1:b8:00:00:10:c4:63 is not in 'zigbee.db'
[00:17:88:01:04:fd:7b:b7]: neighbour f0:d1:b8:00:00:10:c4:63 is not in 'zigbee.db'
I keep getting those warnings after I removed a Osram Bulb (f0:d1:b8:00:00:10:c4:63) from the network. This should not happen since the device is not there anymore from 3 days.
Steps I did to fix the issue:
Home Assistant 0.115.2
ZHA with ConBee II
2020-11-13 12:18:17 ERROR (MainThread) [homeassistant.components.websocket_api.http.connection.1839371576] 'Neighbor' object has no attribute 'device_type'
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 137, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1315, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1350, in _execute_service
await handler.func(service_call)
File "/config/custom_components/zha_map/__init__.py", line 66, in scan_now_handler
await builder.preempt_build()
File "/config/custom_components/zha_map/__init__.py", line 125, in preempt_build
await self.build()
File "/config/custom_components/zha_map/__init__.py", line 138, in build
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 78, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 84, in scan
new = self.new_from_record(neighbor.neighbor)
File "/config/custom_components/zha_map/neighbour.py", line 46, in new_from_record
r.device_type = record.device_type.name
AttributeError: 'Neighbor' object has no attribute 'device_type'
Would it be possible to add a facility which would allow us to select the different type of links.
Eg. All green links, or all red links?
It would allow a cleaner view when trying to optimise our networks.
Looking at tweaking the vis-network and it would be nice to have working parents listed for each device.
In my setup, routers that are (I assume) directly connected to the coordinator don't show the relationship as parent.
Two examples are:
cc:cc:cc:ff:fe:c3:2c:44
https://paste.c-net.org/CampedBreathes
00:0d:6f:ff:fe:7c:bf:0f
https://paste.c-net.org/IntroDeserved
should I see something inside the icons? I just have empty circles and squares
Running 0.3.1 and HASS 0.116.0b3.
When manually running zha_map.scan_now
I get the following error:
Logger: homeassistant.components.websocket_api.http.connection.140302933858576
Source: custom_components/zha_map/neighbour.py:46
Integration: Home Assistant WebSocket API (documentation, issues)
First occurred: 16:40:27 (1 occurrences)
Last logged: 16:40:27
'Neighbor' object has no attribute 'struct'
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 138, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1335, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1370, in _execute_service
await handler.func(service_call)
File "/config/custom_components/zha_map/__init__.py", line 66, in scan_now_handler
await builder.preempt_build()
File "/config/custom_components/zha_map/__init__.py", line 125, in preempt_build
await self.build()
File "/config/custom_components/zha_map/__init__.py", line 138, in build
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 78, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 84, in scan
new = self.new_from_record(neighbor.neighbor)
File "/config/custom_components/zha_map/neighbour.py", line 46, in new_from_record
r.device_type = record.struct.device_type.name
AttributeError: 'Neighbor' object has no attribute 'struct'```
Just updated and restarted home assistant and now I'm getting the following error.
Home Assistant 115.2
ZHA-MAP Version 0.3.0
'NoneType' object has no attribute 'name'
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/websocket_api/commands.py", line 137, in handle_call_service
await hass.services.async_call(
File "/usr/src/homeassistant/homeassistant/core.py", line 1315, in async_call
task.result()
File "/usr/src/homeassistant/homeassistant/core.py", line 1350, in _execute_service
await handler.func(service_call)
File "/config/custom_components/zha_map/init.py", line 66, in scan_now_handler
await builder.preempt_build()
File "/config/custom_components/zha_map/init.py", line 125, in preempt_build
await self.build()
File "/config/custom_components/zha_map/init.py", line 138, in build
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 73, in scan_device
r._update_info()
File "/config/custom_components/zha_map/neighbour.py", line 64, in _update_info
self.device_type = self.device.node_desc.logical_type.name
AttributeError: 'NoneType' object has no attribute 'name'
Hello,
after upgrade HA to 0.115.2 ZHA scan does not work, and I see this in HA log:
2020-09-21 13:54:46 ERROR (MainThread) [homeassistant] Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/config/custom_components/zha_map/__init__.py", line 137, in build
await self.scan_device(seed)
File "/config/custom_components/zha_map/__init__.py", line 226, in scan_device
nei = await Neighbour.scan_device(device)
File "/config/custom_components/zha_map/neighbour.py", line 115, in scan_device
await r.scan()
File "/config/custom_components/zha_map/neighbour.py", line 131, in scan
neighbors = val.NeighborTableList
AttributeError: 'Neighbors' object has no attribute 'NeighborTableList'
2020-09-21 13:54:46 DEBUG (MainThread) [custom_components.zha_map] Building topology starting from coordinator
2020-09-21 13:54:46 DEBUG (MainThread) [custom_components.zha_map.neighbour] [00:21:2e:ff:ff:04:d4:bb]: neighbor request Status: Status.SUCCESS. Response: Neighbors(entries=3, start_index=0, neighbor_table_list=[Neighbor(extended_pan_id=00:21:2e:ff:ff:04:d4:bb, ieee=58:8e:81:ff:fe:6b:1e:10, nwk=0x1208, struct=_NeighborPackStruct(packed=37), permit_joining=<PermitJoins.Accepting: 1>, depth=1, lqi=116), Neighbor(extended_pan_id=00:21:2e:ff:ff:04:d4:bb, ieee=08:6b:d7:ff:fe:07:7e:0d, nwk=0x8ED5, struct=_NeighborPackStruct(packed=37), permit_joining=<PermitJoins.Accepting: 1>, depth=1, lqi=249)])
2020-09-21 13:54:51 INFO (SyncWorker_42) [zoneminder.zm] Initializing runstate 1
Hey there,
I was looking to use this component to get an idea how my Zigbee network looks like. Especially, because I have two sensors that are barely responding, so I wanted to see their path. Plus, I want to install a "mains device", so a non-battery powered Zigbee device to get the signal repeated. And I wanted to then check that the Mesh network updates as I want it to, so the two sensors are not out of reach anymore.
However, when running the scan, it only finds my coordinator, but not a single Zigbee device / neighbour. I also don't see any logs, not even after manually executing the "zha_map.scan_now" service.
The file under /config/neighbours/neighbours_00212effff05c2b1.txt
still looks like this:
{
"ieee": "00:21:2e:ff:ff:05:c2:b1",
"nwk": "0x0000",
"lqi": null,
"device_type": "Coordinator",
"manufacturer": "dresden elektronik",
"model": "RaspBee II",
"offline": false,
"neighbours": []
}
It's also the only file in this folder.
Am I doing something wrong? Am I missing something?
Some environment infos:
Hope somebody has an idea, thanks!
Greetings,
Andy!
Hi,
With the latest version of HA (2021.3.3) which I have just updated to few minutes ago I'm seeing the following warning (the 2nd line):
2021-03-09 11:51:46 WARNING (MainThread) [homeassistant.loader] You are using a custom integration zha_map which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant 2021-03-09 11:51:46 WARNING (MainThread) [homeassistant.loader] No 'version' key in the manifest file for custom integration 'zha_map'. This will not be allowed in a future version of Home Assistant. Please report this to the maintainer of 'zha_map'
Looks like an easy fix. This is listed item no 1 on the Breaking Changes release notes:
https://www.home-assistant.io/blog/2021/03/03/release-20213/#breaking-changes
i get this error in logs
Detalles del registro (ERROR)
Logger: frontend.js.latest.202002205
First occured: 16:13:27 (1 occurences)
Last logged: 16:13:27
http://192.168.86.7:8123/community_plugin/zha-network-card/zha-network-card.js:3:11 Uncaught ReferenceError: transpose is not defined
I'm getting this error when I try and create a custom card.
I followed the directions in the wiki as closely as I could.
I note that the terminology in the directions doesn't match the menu choices and button names in the current (2020) version of Home Assistant.
I'm betting the UI has changed since the directions were written?
For example, the is no "Configure UI" choice in the ⋮ circle, only "Edit Dashboard".
After that, there are 2 + buttons to choose from:
Which + button do we choose in the current (2020) versions of Home Assistant?
I'm running HA in a VMWare Virtual Machine:
arch | x86_64 |
---|---|
chassis | vm |
dev | false |
docker | true |
docker_version | 19.03.11 |
hassio | true |
host_os | HassOS 4.14 |
installation_type | Home Assistant OS |
os_name | Linux |
os_version | 5.4.69 |
python_version | 3.8.5 |
supervisor | 247 |
timezone | America/Chicago |
version | 0.116.4 |
virtualenv | false |
Hi!
I installed this the other day together with the network visualization card. Not sure if this is an issue with this repo or the card but my Aqara temp and window sensors show up on the map, but without connections to anything.
Is it supposed to be like that?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.