fpga_sm4's Introduction

FPGA implementation of Chinese SM4 encryption algorithm.

Introduction

This project is an implementation of Chinese SM4 (also known as sms4) encryption algorithm.

Features

Pipeline architecture,
128-bit datapath,
following algorithms are supported:
- key expansion
- Encryption
- Decryption

Architecture

Interface

Interface	direction	width	description
clk	in	1-bit	clock signal
resetn	in	1-bit	reset signal, 0 reset
sm4_enable_in	in	1-bit	enable sm4 core to work
encdec_sel_in	in	1-bit	select of encryption or decryption
enable_key_exp_in	in	1-bit	enable key expansion for sm4
user_key_valid_in	in	1-bit	valid signal of user key
user_key_in	in	128-bit	128-bit user key
encdec_enable_in	in	1-bit	enable encryption to work
valid_in	in	1-bit	valid signal of plain text
data_in	in	128-bit	plain text, 128-bit, 16 Bytes
key_exp_ready_out	out	1-bit	ready signal of key expansion
ready_out	out	1-bit	ready signal of encryption result
result_out	out	128-bit	encryption result

Timing

Timing diagram is edited by WaveDrom

{signal: [
  {name: 'clk', wave: 'p.....................|.'},
  {name: 'resetn', wave: '01....................|.'},
  {name: 'sm4_enable_in', wave: '0.1...................|.'},
  {name: 'encdec_sel_in', wave: '0.1...................|.'},
  {name: 'enable_key_exp_in', wave: '0..1..................|.'},
  {name: 'user_key_valid_in', wave: '0....10...............|.'},
  {name: 'user_key_in', wave: 'x....3x|..............|.',data:["Key"]},
  {name: 'key_exp_ready_out', wave: '0......|1.............|.'},
  {name: 'valid_in', wave: '0........|101010......|.'},
  {name: 'data_in', wave: 'x........|4x4x4x......|.', data:["Plain 1", "Plain 2", "Plain 3"]},
  {name: 'ready_out', wave: '0........|.....|101010|.'},
  {name: 'data_in', wave: 'x........|.....|5x5x5x|.', data:["Cpiher 1", "Cpiher 2","Cpiher 3",]},   
],
   config : { "hscale" : 2 }
}