zhengfengran/antsdr-fw

ANTSDR Firmware

antsdr-fw

ANTSDR Firmware for the ANTSDR . This project is forked from ADI ADALM-PLUTO

ANTSDR Schematic

The ANTSDR B220 schematic is in the schematic folder, you can find the hardware design here.

Build Instructions

The ANTSDR Firmware is built with the Xilinx Vivado 2019.1. You need to install the correct Vivado Version in your linux PC, and then, you can follow the instructions below to generate the firmware for ANTSDR B220.

sudo apt-get install git build-essential fakeroot libncurses5-dev libssl-dev ccache 
sudo apt-get install dfu-util u-boot-tools device-tree-compiler libssl1.0-dev mtools
sudo apt-get install bc python cpio zip unzip rsync file wget 
git clone --recursive https://github.com/MicroPhase/antsdr-fw.git 
cd ansdr-fw 
export CROSS_COMPILE=arm-linux-gnueabihf- 
export PATH=$PATH:/opt/Xilinx/SDK/2019.1/gnu/aarch32/lin/gcc-arm-linux-gnueabi/bin 
export VIVADO_SETTINGS=/opt/Xilinx/Vivado/2019.1/settings64.sh
make

Build Artifacts

After the firmware building finished, you will see below file in the build folder. These files are used for flash updating.

wcc@wcc-dev:~/wcc/ansdr-fw$ ls -AGhl build 
总用量 315M
-rw-rw-r-- 1 wcc  12M 7月   8 09:32 ant.dfu
-rw-rw-r-- 1 wcc  12M 7月   8 09:36 ant.frm
-rw-rw-r-- 1 wcc   33 7月   8 09:36 ant.frm.md5
-rw-rw-r-- 1 wcc  12M 7月   8 09:32 ant.itb
-rw-rw-r-- 1 wcc  20M 7月   8 09:36 antsdr-fw-v0.33-21-gd72e-dirty.zip
-rw-rw-r-- 1 wcc 677K 7月   8 09:36 antsdr-jtag-bootstrap-v0.33-21-gd72e-dirty.zip
-rw-rw-r-- 1 wcc   69 7月   8 09:36 boot.bif
-rw-rw-r-- 1 wcc 508K 7月   8 09:36 boot.bin
-rw-rw-r-- 1 wcc 508K 7月   8 09:36 boot.dfu
-rw-rw-r-- 1 wcc 637K 7月   8 09:36 boot.frm
-rw-rw-r-- 1 wcc 242M 7月   8 09:37 legal-info-v0.33-21-gd72e-dirty.tar.gz
-rw-rw-r-- 1 wcc 527K 7月   8 09:27 LICENSE.html
-rw-rw-r-- 1 wcc 535K 7月   8 09:29 ps7_init.c
-rw-rw-r-- 1 wcc 534K 7月   8 09:29 ps7_init_gpl.c
-rw-rw-r-- 1 wcc 4.2K 7月   8 09:29 ps7_init_gpl.h
-rw-rw-r-- 1 wcc 4.8K 7月   8 09:29 ps7_init.h
-rw-rw-r-- 1 wcc 2.8M 7月   8 09:29 ps7_init.html
-rw-rw-r-- 1 wcc  36K 7月   8 09:29 ps7_init.tcl
-rw-r--r-- 1 wcc 5.4M 7月   8 09:29 rootfs.cpio.gz
drwxrwxr-x 6 wcc 4.0K 7月   8 09:31 sdk
-rw-rw-r-- 1 wcc 2.2M 7月   8 09:32 system_top.bit
-rw-rw-r-- 1 wcc 591K 7月   8 09:29 system_top.hdf
-rwxrwxr-x 1 wcc 471K 7月   8 09:36 u-boot.elf
-rw-rw---- 1 wcc 128K 7月   8 09:36 uboot-env.bin
-rw-rw---- 1 wcc 129K 7月   8 09:36 uboot-env.dfu
-rw-rw-r-- 1 wcc 6.9K 7月   8 09:36 uboot-env.txt
-rwxrwxr-x 1 wcc 3.9M 7月   8 09:24 zImage
-rw-rw-r-- 1 wcc  17K 7月   8 09:29 zynq-ant-sdr.dtb
-rw-rw-r-- 1 wcc  17K 7月   8 09:29 zynq-ant-sdr-revb.dtb
-rw-rw-r-- 1 wcc  17K 7月   8 09:29 zynq-ant-sdr-revc.dtb

Make SD card boot image

After the firmware building finished, you can build the SD card boot image for ANTSDR. Just type the following command.

make sdimg

You will see the SD boot image in the build_sdimg folder. You can just copy all these files in that folder into a SD card, plug the SD card into the ANTSDR, set the jumper into SD card boot mode.

Update Flash by DFU

The ANTSDR also support flash boot mode. You can update the flash by DFU. Set the jumper into Flash Boot mode. When ANTSDR is power up, push the DFU button, and then, you will see the both led in the ANTSDR will turn green, now it's time to update the flash. You should change into the build folder first,and plug a micro USB into the OTG interface. After that, you should run the following command.

sudo dfu-util -a firmware.dfu -D ./ant.dfu
sudo dfu-util -a boot.dfu -D ./boot.dfu
sudo dfu-util -a uboot-env.dfu -D ./uboot-env.dfu
sudo dfu-util -a uboot-extra-env.dfu -U ./uboot-extra-env.dfu

Now you can repower ANTSDR.

Have FUN!!!