Go-based tooling to check/verify certs (e.g., as part of a Nagios service check)
- Project home
- Overview
- Features
- Changelog
- Requirements
- Installation
- Configuration options
- Examples
- License
- References
See our GitHub repo for the latest code, to file an issue or submit improvements for review and potential inclusion into the project.
This repo contains various tools used to monitor/validate certificates.
Tool Name | Status | Description |
---|---|---|
check_certs |
Beta | Nagios plugin used to monitor certificate chains. |
lscert |
Beta | Small CLI app used to generate a summary of certificate metadata and expiration status. |
certsum |
Alpha | CLI app used to scan one or more given CIDR IP ranges for certs and provide a summary report. |
Nagios plugin used to monitor certificate chains. In addition to the features
shared with lscert
, this app also validates the provided hostname against
the certificate Common Name or one of the available SANs entries.
The output for this application is designed to provide the one-line summary needed by Nagios for quick identification of a problem while providing longer, more detailed information for use in email and Teams notifications (atc0005/send2teams).
Small CLI tool for quickly reviewing the results of replacing a certificate and/or troubleshoot why connections to a certificate-enabled service may be failing.
Certificate metadata can be retrieved from:
- a remote service at a specified fully-qualified domain name (e.g., www.github.com) or IP Address and port (e.g., 443)
- a local certificate "bundle" or standalone leaf certificate file
If specifying a host via IP Address, a warning will be emitted unless the IP Address is in the SANs list for the certificate. This warning can be ignored for the purposes of reviewing the cert details, Provide a valid FQDN as the server name or the "dns name" if you wish to apply hostname validation.
certsum
is an IP range cert scanner prototype. This tool is currently of
"alpha" level quality; many of the exposed flags, help text and summary output
are subject to change significantly in later releases.
This tool is intended for scanning one or more given IP ranges in order to generate a report for discovered certificates, but may be used to scan as few as one target.
Performance is likely to be acceptable as-is for smaller IP ranges, but may be adjusted as needed using the rate limit tuning flag (see the configuration options section for details). The current default value is an attempt to balance scanning speed against OS limitations on the number of open file handles. If adjusting this value, start with small increments to determine best results for your environment.
A default inactivity timeout is used to terminate the application if scanning attempts stall for a specified period of time. See the configuration options section for details.
IP Addresses may be specified as comma-separated values:
- individual IP Addresses
- CIDR IP ranges
- partial ranges
- using partial implementation of octet range addressing (e.g., 192.168.2.10-15)
- Fully-qualified domain names (FQDNs)
- Hostnames (fragile)
- this is highly dependent on your DNS configuration, particularly any
configured search list (aka,
DNS Suffix Search List
in Windows terminology) entries used to qualify short/hostname values
- this is highly dependent on your DNS configuration, particularly any
configured search list (aka,
Support is present (though limited) for filtering "OK" status hosts and certs to either increase or reduce the amount of information provided in the generated summary output. Two summary modes are provided to control the level of detail in the provided output.
-
Multiple tools for validating certificates
lscert
CLI tool- verify certificate used by specified service
- verify local certificate "bundle" or standalone leaf certificate file
check_cert
Nagios plugin- verify certificate used by specified service
- verify local certificate "bundle" or standalone leaf certificate file
certsum
CLI tool- generate summary of discovered certificates from given hosts (single or IP Address ranges, hostnames or FQDNs) and ports
-
Check expiration of all certificates in the provided certificate chain for cert-enabled services
- not expired
- expiring "soon"
- warning threshold
- critical threshold
-
Validate provided hostname against Common Name or one of the available SANs entries (see configuration options)
-
Optional support for verifying SANs entries on a certificate against a provided list
- if
SKIPSANSCHECKS
keyword is supplied as the value no SANs entry checks will be performed; this keyword is useful for defining a shared Nagios check command and service check where some hosts may not use a certificate which has SANs entries defined
- if
-
Detailed "report" of findings
- certificate order
- certificate type
- status (OK, CRITICAL, WARNING)
- SANs entries
- serial number
- issuer
-
Optional generation of OpenSSL-like text output from target cert-enabled service or filename
- thanks to the
grantae/certinfo
package
- thanks to the
-
Optional, leveled logging using
rs/zerolog
package- JSON-format output (to
stderr
) - choice of
disabled
,panic
,fatal
,error
,warn
,info
(the default),debug
ortrace
.
- JSON-format output (to
-
Optional, user-specified timeout value for TCP connection attempt
See the CHANGELOG.md
file for the changes associated with
each release of this application. Changes that have been merged to master
,
but not yet an official release may also be noted in the file under the
Unreleased
section. A helpful link to the Git commit history since the last
official release is also provided for further review.
The following is a loose guideline. Other combinations of Go and operating systems for building and running tools from this repo may work, but have not been tested.
- Go
- see this project's
go.mod
file for preferred version - this project tests against officially supported Go
releases
- the most recent stable release (aka, "stable")
- the prior, but still supported release (aka, "oldstable")
- see this project's
- GCC
- if building with custom options (as the provided
Makefile
does)
- if building with custom options (as the provided
make
- if using the provided
Makefile
- if using the provided
- Windows 10
- Ubuntu Linux 18.04+
- Red Hat Enterprise Linux 7+
- Download Go
- Install Go
- NOTE: Pay special attention to the remarks about
$HOME/.profile
- NOTE: Pay special attention to the remarks about
- Clone the repo
cd /tmp
git clone https://github.com/atc0005/check-cert
cd check-cert
- Install dependencies (optional)
- for Ubuntu Linux
sudo apt-get install make gcc
- for CentOS Linux
sudo yum install make gcc
- for Windows
- Emulated environments (easier)
- Skip all of this and build using the default
go build
command in Windows (see below for use of the-mod=vendor
flag) - build using Windows Subsystem for Linux Ubuntu environment and just copy out the Windows binaries from that environment
- If already running a Docker environment, use a container with the Go tool-chain already installed
- If already familiar with LXD, create a container and follow the installation steps given previously to install required dependencies
- Skip all of this and build using the default
- Native tooling (harder)
- see the StackOverflow Question
32127524
link in the References section for potential options for installingmake
on Windows - see the mingw-w64 project homepage link in the
References section for options for installing
gcc
and related packages on Windows
- see the StackOverflow Question
- Emulated environments (easier)
- for Ubuntu Linux
- Build binaries
- for the current operating system, explicitly using bundled dependencies
in top-level
vendor
foldergo build -mod=vendor ./cmd/check_cert/
go build -mod=vendor ./cmd/lscert/
go build -mod=vendor ./cmd/certsum/
- for all supported platforms (where
make
is installed)make all
- for use on Windows
make windows
- for use on Linux
make linux
- for the current operating system, explicitly using bundled dependencies
in top-level
- Copy the newly compiled binary from the applicable
/tmp
subdirectory path (based on the clone instructions in this section) below and deploy where needed.- if using
Makefile
- look in
/tmp/check-cert/release_assets/check_cert/
- look in
/tmp/check-cert/release_assets/lscert/
- look in
/tmp/check-cert/release_assets/certsum/
- look in
- if using
go build
- look in
/tmp/check-cert/
- look in
- if using
- Download the latest release binaries
- Deploy
- Place
check_cert
alongside your other Nagios plugins- e.g.,
/usr/lib/nagios/plugins/
or/usr/lib64/nagios/plugins/
- e.g.,
- Place
lscert
,certsum
in a location of your choice- e.g.,
/usr/local/bin/
- e.g.,
- Place
The behavior of the check_cert
plugin differs somewhat from
check_http
v2.1.2
; this plugin triggers a whole day
later than check_http
does for the same WARNING
and
CRITICAL
threshold values.
For example, if we use the default values of 30 days for WARNING
threshold
and 15 days for the CRITICAL
threshold:
- The thresholds are calculated
WARNING
: Now (exact time in UTC) + 30 daysCRITICAL
: Now (exact time in UTC) + 15 days
- The certificate expiration date is checked and the very first match (in
order) determines the status of the service check
- if the certificate expires before the current time, the status is
EXPIRED
- if the certificate expires before the CRITICAL threshold, the status
is
CRITICAL
- if the certificate expires before the WARNING threshold, the status
is
WARNING
- otherwise, the certificate is assumed to have a status of
OK
- if the certificate expires before the current time, the status is
No rounding is performed.
See GH-32 for additional info.
- Use the
-h
or--help
flag to display current usage information. - Flags marked as
required
must be set via CLI flag. - Flags not marked as required are for settings where a useful default is already defined, but may be overridden if desired.
Flag | Required | Default | Repeat | Possible | Description |
---|---|---|---|---|---|
f , filename |
No | false |
No | valid file name characters | Fully-qualified path to a PEM formatted certificate file containing one or more certificates. |
branding |
No | false |
No | branding |
Toggles emission of branding details with plugin status details. This output is disabled by default. |
h , help |
No | false |
No | h , help |
Show Help text along with the list of supported flags. |
v , verbose |
No | false |
No | v , verbose |
Toggles emission of detailed certificate metadata. This level of output is disabled by default. |
version |
No | false |
No | version |
Whether to display application version and then immediately exit application. |
c , age-critical |
No | 15 | No | positive whole number of days | The threshold for the certificate check's CRITICAL state. If the certificate expires before this number of days then the service check will be considered in a CRITICAL state. |
w , age-warning |
No | 30 | No | positive whole number of days | The threshold for the certificate check's WARNING state. If the certificate expires before this number of days, but not before the age-critical value, then the service check will be considered in a WARNING state. |
ll , log-level |
No | info |
No | disabled , panic , fatal , error , warn , info , debug , trace |
Log message priority filter. Log messages with a lower level are ignored. |
p , port |
No | 443 |
No | positive whole number between 1-65535, inclusive | TCP port of the remote certificate-enabled service. This is usually 443 (HTTPS) or 636 (LDAPS). |
t , timeout |
No | 10 |
No | positive whole number of seconds | Timeout value in seconds allowed before a connection attempt to a remote certificate-enabled service (in order to retrieve the certificate) is abandoned and an error returned. |
se , sans-entries |
No | No | comma-separated list of values | One or many Subject Alternate Names (SANs) expected for the certificate used by the remote service. If provided, this list of comma-separated (optional) values is required for the certificate to pass validation. If the case-insensitive SKIPSANSCHECKS keyword is provided this validation will be skipped, effectively turning the use of this flag into a NOOP. | |
s , server |
Yes | No | fully-qualified domain name or IP Address | The fully-qualified domain name or IP Address of the remote system whose cert(s) will be monitored. This value is used to make the connection to the server in order to retrieve the certificate chain. For hosts with only a single certificate, this value is often the FQDN of the host itself, but for multi-certificate servers the user-specified value will be crucial in order to allow the remote host to select the appropriate certificate (Server Name Indication support (SNI)). For websites hosted on those servers, it is necessary to instead provide the FQDN of the site instead of the server hostname. For example, specify www.example.org instead of host7.example.com . Specify the site FQDN if in doubt. The user-specified value will also be validated against the Common Name and Subject Alternate Names fields unless the dns-name flag is also specified, in which case this value is only used for making the initial connection. |
|
dn , dns-name |
No | No | fully-qualified domain name or IP Address | The fully-qualified domain name of the remote system to be used for hostname verification. This option can be used for cases where the initial connection is made using a name or IP Address not associated with the certificate. See the server flag description for more information. |
Flag | Required | Default | Repeat | Possible | Description |
---|---|---|---|---|---|
f , filename |
No | false |
No | valid file name characters | Fully-qualified path to a PEM formatted certificate file containing one or more certificates. |
text |
No | false |
No | true , false |
Toggles emission of x509 TLS certificates in an OpenSSL-inspired text format. This output is disabled by default. |
h , help |
No | false |
No | h , help |
Show Help text along with the list of supported flags. |
v , verbose |
No | false |
No | v , verbose |
Toggles emission of detailed certificate metadata. This level of output is disabled by default. |
version |
No | false |
No | version |
Whether to display application version and then immediately exit application. |
c , age-critical |
No | 15 | No | positive whole number of days | The threshold for the certificate check's CRITICAL state. If the certificate expires before this number of days then the service check will be considered in a CRITICAL state. |
w , age-warning |
No | 30 | No | positive whole number of days | The threshold for the certificate check's WARNING state. If the certificate expires before this number of days, but not before the age-critical value, then the service check will be considered in a WARNING state. |
ll , log-level |
No | info |
No | disabled , panic , fatal , error , warn , info , debug , trace |
Log message priority filter. Log messages with a lower level are ignored. |
p , port |
No | 443 |
No | positive whole number between 1-65535, inclusive | TCP port of the remote certificate-enabled service. This is usually 443 (HTTPS) or 636 (LDAPS). |
t , timeout |
No | 10 |
No | positive whole number of seconds | Timeout value in seconds allowed before a connection attempt to a remote certificate-enabled service (in order to retrieve the certificate) is abandoned and an error returned. |
se , sans-entries |
No | No | comma-separated list of values | One or many Subject Alternate Names (SANs) expected for the certificate used by the remote service. If provided, this list of comma-separated (optional) values is required for the certificate to pass validation. If the case-insensitive SKIPSANSCHECKS keyword is provided this validation will be skipped, effectively turning the use of this flag into a NOOP. | |
s , server |
Yes | No | fully-qualified domain name or IP Address | The fully-qualified domain name or IP Address of the remote system whose cert(s) will be monitored. This value is used to make the connection to the server in order to retrieve the certificate chain. For hosts with only a single certificate, this value is often the FQDN of the host itself, but for multi-certificate servers the user-specified value will be crucial in order to allow the remote host to select the appropriate certificate (Server Name Indication support (SNI)). For websites hosted on those servers, it is necessary to instead provide the FQDN of the site instead of the server hostname. For example, specify www.example.org instead of host7.example.com . Specify the site FQDN if in doubt. The user-specified value will also be validated against the Common Name and Subject Alternate Names fields unless the dns-name flag is also specified, in which case this value is only used for making the initial connection. |
|
dn , dns-name |
No | No | fully-qualified domain name or IP Address | The fully-qualified domain name of the remote system to be used for hostname verification. This option can be used for cases where the initial connection is made using a name or IP Address not associated with the certificate. See the server flag description for more information. |
This tool is in early development. Options for this tool are subject to change, perhaps even significantly, in future releases.
Flag | Required | Default | Repeat | Possible | Description |
---|---|---|---|---|---|
h , help |
No | false |
No | h , help |
Show Help text along with the list of supported flags. |
version |
No | false |
No | version |
Whether to display application version and then immediately exit application. |
c , age-critical |
No | 15 | No | positive whole number of days | The threshold for the certificate check's CRITICAL state. If the certificate expires before this number of days then the service check will be considered in a CRITICAL state. |
w , age-warning |
No | 30 | No | positive whole number of days | The threshold for the certificate check's WARNING state. If the certificate expires before this number of days, but not before the age-critical value, then the service check will be considered in a WARNING state. |
ll , log-level |
No | info |
No | disabled , panic , fatal , error , warn , info , debug , trace |
Log message priority filter. Log messages with a lower level are ignored. |
t , timeout |
No | 10 |
No | positive whole number of seconds | Timeout value in seconds allowed before a connection attempt to a remote certificate-enabled service (in order to retrieve the certificate) is abandoned and an error returned. |
se , sans-entries |
No | No | comma-separated list of values | One or many Subject Alternate Names (SANs) expected for the certificate used by the remote service. If provided, this list of comma-separated (optional) values is required for the certificate to pass validation. If the case-insensitive SKIPSANSCHECKS keyword is provided this validation will be skipped, effectively turning the use of this flag into a NOOP. | |
st , scan-timeout |
No | 200 | No | positive whole number of milliseconds, minimum 1 | The number of milliseconds before a connection attempt during a port scan is abandoned and an error returned. This timeout value is separate from the general timeout value used when retrieving certificates. This setting is used specifically to quickly determine port state as part of bulk operations where speed is crucial. |
at , app-timeout |
No | 30 | No | positive whole number of seconds, minimum 2 | The number of seconds the application is allowed to remain inactive (i.e., "hung") before it is automatically terminated. |
srl , scan-rate-limit |
No | 100 | No | positive whole number | Maximum concurrent port and certificate scans. Remaining scans are queued until an existing scan completes. |
ips , hosts |
No | No | one or more valid, comma-separated IP Addresses (single or range), hostnames or FQDNs | List of comma-separated individual IP Addresses, CIDR IP ranges, partial (dash-separated) ranges (e.g., 192.168.2.10-15), hostnames or FQDNs to scan for certificates. | |
p , ports |
No | 443 | No | one or more valid, comma-separated TCP ports | List of comma-separated TCP ports to check for certificates. If not specified, the list defaults to 443 only. |
spsr , show-port-scan-results |
No | false |
No | true , false |
Toggles listing host port scan results. |
scp , show-closed-ports |
No | false |
No | true , false |
Toggles listing all host port scan results, even for hosts without any specified ports in an open state. |
shwvc , show-hosts-with-valid-certs |
No | false |
No | true , false |
Toggles listing all cert check results in overview output, even for hosts with valid certificates. |
svc , show-valid-certs |
No | false |
No | true , false |
Toggles listing all certificates in output summary, even certificates which have passed all validity checks. |
so , show-overview |
No | false |
No | true , false |
Toggles summary output view from detailed to overview. |
Not currently supported. This feature may be added later if there is sufficient interest.
This example shows using the Nagios plugin to manually check a remote
certificate-enabled port on www.google.com. We override the default WARNING
and CRITICAL
age threshold values with somewhat arbitrary numbers.
NOTE: Use the --verbose
flag to expose further details.
$ ./check_cert --server www.google.com --port 443 --age-critical 30 --age-warning 50
OK: leaf cert "www.google.com" expires next with 52d 16h remaining (until 2021-09-20 04:12:57 +0000 UTC) [EXPIRED: 0, EXPIRING: 0, OK: 3]
**ERRORS**
* None
**THRESHOLDS**
* CRITICAL: Expires before 2021-08-28 11:55:42 +0000 UTC (30 days)
* WARNING: Expires before 2021-09-17 11:55:42 +0000 UTC (50 days)
**DETAILED INFO**
Certificate 1 of 3 (leaf):
Name: CN=www.google.com
SANs entries: [www.google.com]
Issuer: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
Serial: 12:D4:D6:BA:D3:7B:1D:D1:0A:00:00:00:00:EB:61:08
Issued On: 2021-06-28 04:12:58 +0000 UTC
Expiration: 2021-09-20 04:12:57 +0000 UTC
Status: [OK] 52d 16h remaining
Certificate 2 of 3 (intermediate):
Name: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GTS Root R1,O=Google Trust Services LLC,C=US
Serial: 02:03:BC:53:59:6B:34:C7:18:F5:01:50:66
Issued On: 2020-08-13 00:00:42 +0000 UTC
Expiration: 2027-09-30 00:00:42 +0000 UTC
Status: [OK] 2253d 12h remaining
Certificate 3 of 3 (intermediate):
Name: CN=GTS Root R1,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GlobalSign Root CA,OU=Root CA,O=GlobalSign nv-sa,C=BE
Serial: 77:BD:0D:6C:DB:36:F9:1A:EA:21:0F:C4:F0:58:D3:0D
Issued On: 2020-06-19 00:00:42 +0000 UTC
Expiration: 2028-01-28 00:00:42 +0000 UTC
Status: [OK] 2373d 12h remaining
See the WARNING
example output for additional details.
Here we do the same thing again, but using the expiration date values returned
earlier as a starting point, we intentionally move the threshold values in
order to trigger a WARNING
state for the leaf certificate: if the leaf
certificate is good for 52 days and 16 hours more, we indicate that warnings
that should trigger once the cert has fewer than 53 days left.
NOTE: Use the --verbose
flag to expose further details.
$ ./check_c./check_cert --server www.google.com --port 443 --age-critical 30 --age-warning 53
{"level":"error","version":"check-cert v0.4.2-6-g934c303 (https://github.com/atc0005/check-cert)","logging_level":"info","app_type":"plugin","cert_check_timeout":"10s","age_warning":53,"age_critical":30,"expected_sans_entries":"","server":"www.google.com","port":443,"error":"1 certificates expired or expiring","expired_certs":0,"expiring_certs":1,"time":"2021-07-29T06:57:11-05:00","caller":"github.com/atc0005/check-cert/cmd/check_cert/main.go:241","message":"expired or expiring certs present in chain"}
WARNING: leaf cert "www.google.com" expires next with 52d 16h remaining (until 2021-09-20 04:12:57 +0000 UTC) [EXPIRED: 0, EXPIRING: 1, OK: 2]
**ERRORS**
* 1 certificates expired or expiring
**THRESHOLDS**
* CRITICAL: Expires before 2021-08-28 11:57:11 +0000 UTC (30 days)
* WARNING: Expires before 2021-09-20 11:57:11 +0000 UTC (53 days)
**DETAILED INFO**
Certificate 1 of 3 (leaf):
Name: CN=www.google.com
SANs entries: [www.google.com]
Issuer: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
Serial: 12:D4:D6:BA:D3:7B:1D:D1:0A:00:00:00:00:EB:61:08
Issued On: 2021-06-28 04:12:58 +0000 UTC
Expiration: 2021-09-20 04:12:57 +0000 UTC
Status: [WARNING] 52d 16h remaining
Certificate 2 of 3 (intermediate):
Name: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GTS Root R1,O=Google Trust Services LLC,C=US
Serial: 02:03:BC:53:59:6B:34:C7:18:F5:01:50:66
Issued On: 2020-08-13 00:00:42 +0000 UTC
Expiration: 2027-09-30 00:00:42 +0000 UTC
Status: [OK] 2253d 12h remaining
Certificate 3 of 3 (intermediate):
Name: CN=GTS Root R1,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GlobalSign Root CA,OU=Root CA,O=GlobalSign nv-sa,C=BE
Serial: 77:BD:0D:6C:DB:36:F9:1A:EA:21:0F:C4:F0:58:D3:0D
Issued On: 2020-06-19 00:00:42 +0000 UTC
Expiration: 2028-01-28 00:00:42 +0000 UTC
Status: [OK] 2373d 12h remaining
Some items to note (in order of appearance):
- JSON output providing structured logging information
- this is sent to
stderr
- Nagios ignores
stderr
output from plugins;stdout
is for Nagios,stderr
is for humans
- this is sent to
- The one-line status output on the second line
- this is used by Nagios for display in an overview view for all service checkout for a host
- this is used by Nagios for text, email and whatever else notifications (if configured)
- The
ERRORS
section notes briefly what is wrong with the cert - The
CERTIFICATE AGE THRESHOLDS
section notes what (calculated) thresholds were used to determine the current service check status (results) - The
DETAILED INFO
section contains an overview of the certificate chain- this is used by Nagios for display on the detailed service check-specific page (e.g., shows last check time, frequency, current state, etc)
- as for the one-line output, this is used by Nagios for text, email and whatever other notifications may be configured
- The
Status
field for the leaf certificate changed fromOK
toWARNING
and this plugin set the appropriate exit code to let Nagios know of the state change.
As with the WARNING
example, we use the expiration date values returned from
the initial check as a starting point and intentionally move the threshold
values in order to trigger a CRITICAL
state for the leaf certificate: if the
leaf certificate is good for 52 days and 16 hours more, we specify 90 days for
the WARNING
threshold and 60 days for the CRITICAL
threshold. This
triggers a CRITICAL
state.
NOTE: Use the --verbose
flag to expose further details.
$ ./check_c./check_cert --server www.google.com --port 443 --age-critical 60 --age-warning 90
{"level":"error","version":"check-cert v0.4.2-6-g934c303 (https://github.com/atc0005/check-cert)","logging_level":"info","app_type":"plugin","cert_check_timeout":"10s","age_warning":90,"age_critical":60,"expected_sans_entries":"","server":"www.google.com","port":443,"error":"1 certificates expired or expiring","expired_certs":0,"expiring_certs":1,"time":"2021-07-29T06:58:35-05:00","caller":"github.com/atc0005/check-cert/cmd/check_cert/main.go:241","message":"expired or expiring certs present in chain"}
CRITICAL: leaf cert "www.google.com" expires next with 52d 16h remaining (until 2021-09-20 04:12:57 +0000 UTC) [EXPIRED: 0, EXPIRING: 1, OK: 2]
**ERRORS**
* 1 certificates expired or expiring
**THRESHOLDS**
* CRITICAL: Expires before 2021-09-27 11:58:35 +0000 UTC (60 days)
* WARNING: Expires before 2021-10-27 11:58:35 +0000 UTC (90 days)
**DETAILED INFO**
Certificate 1 of 3 (leaf):
Name: CN=www.google.com
SANs entries: [www.google.com]
Issuer: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
Serial: 12:D4:D6:BA:D3:7B:1D:D1:0A:00:00:00:00:EB:61:08
Issued On: 2021-06-28 04:12:58 +0000 UTC
Expiration: 2021-09-20 04:12:57 +0000 UTC
Status: [CRITICAL] 52d 16h remaining
Certificate 2 of 3 (intermediate):
Name: CN=GTS CA 1C3,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GTS Root R1,O=Google Trust Services LLC,C=US
Serial: 02:03:BC:53:59:6B:34:C7:18:F5:01:50:66
Issued On: 2020-08-13 00:00:42 +0000 UTC
Expiration: 2027-09-30 00:00:42 +0000 UTC
Status: [OK] 2253d 12h remaining
Certificate 3 of 3 (intermediate):
Name: CN=GTS Root R1,O=Google Trust Services LLC,C=US
SANs entries: []
Issuer: CN=GlobalSign Root CA,OU=Root CA,O=GlobalSign nv-sa,C=BE
Serial: 77:BD:0D:6C:DB:36:F9:1A:EA:21:0F:C4:F0:58:D3:0D
Issued On: 2020-06-19 00:00:42 +0000 UTC
Expiration: 2028-01-28 00:00:42 +0000 UTC
Status: [OK] 2373d 12h remaining
Here we use the expired.badssl.com subdomain to demo the results of encountering one or more (in this case more) expired certificates in a chain. Aside from the FQDN, all default options (including the port) are used.
NOTE: Use the --verbose
flag to expose further details.
$ ./check_cert --server expired.badssl.com
{"level":"error","version":"check-cert v0.4.2-6-g934c303 (https://github.com/atc0005/check-cert)","logging_level":"info","app_type":"plugin","cert_check_timeout":"10s","age_warning":30,"age_critical":15,"expected_sans_entries":"","server":"expired.badssl.com","port":443,"error":"2 certificates expired or expiring","expired_certs":2,"expiring_certs":0,"time":"2021-07-29T07:02:17-05:00","caller":"github.com/atc0005/check-cert/cmd/check_cert/main.go:241","message":"expired or expiring certs present in chain"}
CRITICAL: leaf cert "*.badssl.com" expired 2299d 12h ago (on 2015-04-12 23:59:59 +0000 UTC) [EXPIRED: 2, EXPIRING: 0, OK: 1]
**ERRORS**
* 2 certificates expired or expiring
**THRESHOLDS**
* CRITICAL: Expires before 2021-08-13 12:02:16 +0000 UTC (15 days)
* WARNING: Expires before 2021-08-28 12:02:16 +0000 UTC (30 days)
**DETAILED INFO**
Certificate 1 of 3 (leaf):
Name: CN=*.badssl.com,OU=Domain Control Validated+OU=PositiveSSL Wildcard
SANs entries: [*.badssl.com badssl.com]
Issuer: CN=COMODO RSA Domain Validation Secure Server CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
Serial: 4A:E7:95:49:FA:9A:BE:3F:10:0F:17:A4:78:E1:69:09
Issued On: 2015-04-09 00:00:00 +0000 UTC
Expiration: 2015-04-12 23:59:59 +0000 UTC
Status: [EXPIRED] 2299d 12h ago
Certificate 2 of 3 (intermediate):
Name: CN=COMODO RSA Domain Validation Secure Server CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
SANs entries: []
Issuer: CN=COMODO RSA Certification Authority,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
Serial: 2B:2E:6E:EA:D9:75:36:6C:14:8A:6E:DB:A3:7C:8C:07
Issued On: 2014-02-12 00:00:00 +0000 UTC
Expiration: 2029-02-11 23:59:59 +0000 UTC
Status: [OK] 2754d 11h remaining
Certificate 3 of 3 (intermediate):
Name: CN=COMODO RSA Certification Authority,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
SANs entries: []
Issuer: CN=AddTrust External CA Root,OU=AddTrust External TTP Network,O=AddTrust AB,C=SE
Serial: 27:66:EE:56:EB:49:F3:8E:AB:D7:70:A2:FC:84:DE:22
Issued On: 2000-05-30 10:48:38 +0000 UTC
Expiration: 2020-05-30 10:48:38 +0000 UTC
Status: [EXPIRED] 425d 1h ago
This example shows using the CLI app to perform the same initial check that we performed earlier using the Nagios plugin.
NOTE: Use the --verbose
flag to expose further details.
$ ./lscert --server www.google.com --port 443 --age-critical 50 --age-warning 55
Connecting to remote server "www.google.com" at port 443
=============================
CERTIFICATES | AGE THRESHOLDS
=============================
- WARNING: Expires before 2020-08-30 11:12:01 +0000 UTC (55 days)
- CRITICAL: Expires before 2020-08-25 11:12:01 +0000 UTC (50 days)
======================
CERTIFICATES | SUMMARY
======================
- OK: 2 certs found for service running on www.google.com at port 443
- OK: Provided hostname matches discovered certificate
- OK: leaf cert "www.google.com" expires next with 65d 3h remaining (until 2020-09-09 14:31:22 +0000 UTC)
- OK: [EXPIRED: 0, EXPIRING: 0, OK: 2]
============================
CERTIFICATES | CHAIN DETAILS
============================
Certificate 1 of 2 (leaf):
Name: CN=www.google.com,O=Google LLC,L=Mountain View,ST=California,C=US
SANs entries: [www.google.com]
Issuer: CN=GTS CA 1O1,O=Google Trust Services,C=US
Serial: FD:6F:3E:24:98:C2:5B:1D:08:00:00:00:00:47:F0:33
Expiration: 2020-09-09 14:31:22 +0000 UTC
Status: [OK] 65d 3h remaining
Certificate 2 of 2 (intermediate):
Name: CN=GTS CA 1O1,O=Google Trust Services,C=US
SANs entries: []
Issuer: CN=GlobalSign,OU=GlobalSign Root CA - R2,O=GlobalSign
Serial: 01:E3:B4:9A:A1:8D:8A:A9:81:25:69:50:B8
Expiration: 2021-12-15 00:00:42 +0000 UTC
Status: [OK] 526d 12h remaining
NOTE: Use the --verbose
flag to expose further details.
$ ./lscert --server www.google.com --port 443 --age-critical 50 --age-warning 66
Connecting to remote server "www.google.com" at port 443
=============================
CERTIFICATES | AGE THRESHOLDS
=============================
- WARNING: Expires before 2020-09-10 11:13:11 +0000 UTC (66 days)
- CRITICAL: Expires before 2020-08-25 11:13:11 +0000 UTC (50 days)
======================
CERTIFICATES | SUMMARY
======================
- OK: 2 certs found for service running on www.google.com at port 443
- OK: Provided hostname matches discovered certificate
- WARNING: leaf cert "www.google.com" expires next with 65d 3h remaining (until 2020-09-09 14:31:22 +0000 UTC)
- WARNING: [EXPIRED: 0, EXPIRING: 1, OK: 1]
============================
CERTIFICATES | CHAIN DETAILS
============================
Certificate 1 of 2 (leaf):
Name: CN=www.google.com,O=Google LLC,L=Mountain View,ST=California,C=US
SANs entries: [www.google.com]
Issuer: CN=GTS CA 1O1,O=Google Trust Services,C=US
Serial: FD:6F:3E:24:98:C2:5B:1D:08:00:00:00:00:47:F0:33
Expiration: 2020-09-09 14:31:22 +0000 UTC
Status: [WARNING] 65d 3h remaining
Certificate 2 of 2 (intermediate):
Name: CN=GTS CA 1O1,O=Google Trust Services,C=US
SANs entries: []
Issuer: CN=GlobalSign,OU=GlobalSign Root CA - R2,O=GlobalSign
Serial: 01:E3:B4:9A:A1:8D:8A:A9:81:25:69:50:B8
Expiration: 2021-12-15 00:00:42 +0000 UTC
Status: [OK] 526d 12h remaining
In general, the differences between the OK
and WARNING
output for the two
tools is minor. However, unlike the check_cert
Nagios plugin where we are
limited to one line of summary output, the lscert
CLI tool doesn't share the
same output requirements and can be more expressive (e.g., such as the summary
section to highlight particular items of interest). Like the check_cert
Nagios plugin, the lscert
CLI tool also displays the thresholds used to
determine the state of the checks applied to the certificate chain.
Here we use the expired.badssl.com subdomain to demo the results of encountering one or more (in this case more) expired certificates in a chain. Aside from the FQDN, all default options (including the port) are used.
NOTE: Use the --verbose
flag to expose further details.
$ ./lscert --server expired.badssl.com
Connecting to remote server "expired.badssl.com" at port 443
=============================
CERTIFICATES | AGE THRESHOLDS
=============================
- WARNING: Expires before 2020-08-05 11:14:32 +0000 UTC (30 days)
- CRITICAL: Expires before 2020-07-21 11:14:32 +0000 UTC (15 days)
======================
CERTIFICATES | SUMMARY
======================
- OK: 3 certs found for service running on expired.badssl.com at port 443
- OK: Provided hostname matches discovered certificate
- CRITICAL: leaf cert "*.badssl.com" expired 1911d 11h ago (on 2015-04-12 23:59:59 +0000 UTC)
- CRITICAL: [EXPIRED: 2, EXPIRING: 0, OK: 1]
============================
CERTIFICATES | CHAIN DETAILS
============================
Certificate 1 of 3 (leaf):
Name: CN=*.badssl.com,OU=Domain Control Validated+OU=PositiveSSL Wildcard
SANs entries: [*.badssl.com badssl.com]
Issuer: CN=COMODO RSA Domain Validation Secure Server CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
Serial: 4A:E7:95:49:FA:9A:BE:3F:10:0F:17:A4:78:E1:69:09
Expiration: 2015-04-12 23:59:59 +0000 UTC
Status: [EXPIRED] 1911d 11h ago
Certificate 2 of 3 (intermediate):
Name: CN=COMODO RSA Domain Validation Secure Server CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
SANs entries: []
Issuer: CN=COMODO RSA Certification Authority,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
Serial: 2B:2E:6E:EA:D9:75:36:6C:14:8A:6E:DB:A3:7C:8C:07
Expiration: 2029-02-11 23:59:59 +0000 UTC
Status: [OK] 3142d 12h remaining
Certificate 3 of 3 (intermediate):
Name: CN=COMODO RSA Certification Authority,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
SANs entries: []
Issuer: CN=AddTrust External CA Root,OU=AddTrust External TTP Network,O=AddTrust AB,C=SE
Serial: 27:66:EE:56:EB:49:F3:8E:AB:D7:70:A2:FC:84:DE:22
Expiration: 2020-05-30 10:48:38 +0000 UTC
Status: [EXPIRED] 37d 0h ago
Some items to note in the CERTIFICATES | SUMMARY
section:
- the certificate which expired first (leaf cert
*.badssl.com
) is listed- chain position
- expiration summary
- expiration date
- a quick count of the
EXPIRED
,EXPIRING
andOK
certificates - future work here might list out all expired certs, but the assumption was that listing the first one to expire and then listing out the chain details in the following section (with explicit notes re expiration status) was sufficient coverage
This tool is in early development and options available are subject to change (perhaps even significantly) in future releases.
Please see the list of available flags/options documented earlier in this README for further options.
The following options generate a one-liner, high-level overview for each host with a certificate. Hosts without a certificate are omitted from the results.
$ ./certsum --hosts 192.168.5.0/24 --show-hosts-with-valid-certs --show-overview
Beginning cert scan against 254 unique hosts using ports: [443]
...................
Completed certificates scan in 2.3670248s
19 certificates (8 issues) found.
Results (all):
IP Address Port Subject or SANs Status Chain Summary Serial
--- --- --- --- --- ---
192.168.5.22 443 VMware ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] 92:4A:AD:38:3C:DC:C1:B6
192.168.5.3 443 VMware ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] DE:FD:50:2B:C5:7F:79:F4
192.168.5.24 443 VMware ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] 9A:DF:A1:A6:60:16:4E:C0
192.168.5.11 443 VMware ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] 8D:2C:61:CF:AE:57:58:98
192.168.5.83 443 HP Jetdirect 4639304E ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] 47:F0:56:50
192.168.5.109 443 HP LaserJet M506 F2A68A ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] -29:25:F5:A8:D5:E2:FC:C3:71:77:F4:48:3A:09:2E:24:0F:0E:37:1A
192.168.5.93 443 NPI25BC25 ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] -61:CE:BD:13
192.168.5.113 443 NPI253CDE ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] 38:BC:BD:21
192.168.5.136 443 HP Jetdirect BAC74492 ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] 20:46:94:C0
192.168.5.104 443 HP Jetdirect 7FE7AF22 ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] 02
192.168.5.165 443 192.168.5.165 ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] EF:E5:A3:0E:2F:FA:C1:3A
192.168.5.183 443 192.168.5.183 ⛔ (!!) [EXPIRED: 1, EXPIRING: 0, OK: 0] F7:A2:CD:4A:F2:A0:63:10
192.168.5.182 443 192.168.5.182 ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] AC:53:68:BB:38:5E:5A:6C
192.168.5.105 443 192.168.5.105 ✅ (OK) [EXPIRED: 0, EXPIRING: 0, OK: 1] 64:36:33:33:32:36:37:38:30:31:64:66:37:31:31:62:32:62:37:63
Of note:
- implicitly use the default port of
443/tcp
- scan the entire
192.168.5.0/24
range - generate output in the overview or summary format
- show "OK" hosts alongside problem hosts (usually omitted for brevity)
$ ./certsum --ports 443 --hosts 192.168.5.0/24
Total IPs from all ranges before deduping: 254
Total IPs from all ranges after deduping: 254
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
..........................
Completed certificate analysis
Results:
IP Address Port Subject or SANs Status (Type) Summary Serial
--- --- --- --- --- ---
192.168.5.104 443 HP Jetdirect 7FE7AF22 ⛔ (leaf; self-signed) [EXPIRED] 3942d 12h ago 02
192.168.5.3 443 VMware ⛔ (root) [EXPIRED] 571d 23h ago DE:FD:50:2B:C5:7F:79:F4
192.168.5.109 443 HP LaserJet M506 F2A68A ⛔ (leaf; self-signed) [CRITICAL] 1d 7h remaining -29:25:F5:A8:D5:E2:FC:C3:71:77:F4:48:3A:09:2E:24:0F:0E:37:1A
192.168.5.83 443 HP Jetdirect 4639304E ⛔ (leaf; self-signed) [EXPIRED] 2175d 12h ago 47:F0:56:50
192.168.5.165 443 192.168.5.165 ⛔ (leaf; self-signed) [EXPIRED] 1519d 7h ago EF:E5:A3:0E:2F:FA:C1:3A
192.168.5.183 443 192.168.5.183 ⛔ (leaf; self-signed) [EXPIRED] 1034d 19h ago F7:A2:CD:4A:F2:A0:63:10
Of note:
- explicitly specify port
443/tcp
(the default) - scan the entire
192.168.5.0/24
range - only emit "problem" entries
Here we specify a partial range using a syntax intentionally similar to the octet based addressing syntax accepted by nmap (an amazing tool). Commas within an octet (in order to exclude IPs) are not supported at this time.
$ ./certsum --ports 443 --hosts 192.168.5.104-110
Total IPs from all ranges before deduping: 6
Total IPs from all ranges after deduping: 6
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
..........................
Completed certificate analysis
Results:
IP Address Port Subject or SANs Status (Type) Summary Serial
--- --- --- --- --- ---
192.168.5.104 443 HP Jetdirect 7FE7AF22 ⛔ (leaf; self-signed) [EXPIRED] 3942d 12h ago 02
192.168.5.109 443 HP LaserJet M506 F2A68A ⛔ (leaf; self-signed) [CRITICAL] 1d 7h remaining -29:25:F5:A8:D5:E2:FC:C3:71:77:F4:48:3A:09:2E:24:0F:0E:37:1A
$ ./certsum --ports 443 --hosts 192.168.5.3,192.168.5.104-110
Total IPs from all ranges before deduping: 7
Total IPs from all ranges after deduping: 7
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
..........................
Completed certificate analysis
Results:
IP Address Port Subject or SANs Status (Type) Summary Serial
--- --- --- --- --- ---
192.168.5.3 443 VMware ⛔ (root) [EXPIRED] 577d 0h ago DE:FD:50:2B:C5:7F:79:F4
192.168.5.104 443 HP Jetdirect 7FE7AF22 ⛔ (leaf; self-signed) [EXPIRED] 3942d 12h ago 02
192.168.5.109 443 HP LaserJet M506 F2A68A ⛔ (leaf; self-signed) [CRITICAL] 1d 7h remaining -29:25:F5:A8:D5:E2:FC:C3:71:77:F4:48:3A:09:2E:24:0F:0E:37:1A
$ ./certsum --ports 443 --hosts 192.168.5.3,192.168.5.104-110,192.168.2.0/24
Total IPs from all ranges before deduping: 260
Total IPs from all ranges after deduping: 260
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
...............................................................
Only the lead-in text is included as the output closely matches the other examples.
Of note:
- Default HTTPS port (because we did not specify one)
- We are using a FQDN
$ ./certsum --hosts 192.168.5.3,expired.badssl.com
Total IPs from all ranges before deduping: 2
Total IPs from all ranges after deduping: 2
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
..
Completed certificate analysis
Results:
IP Address Port Subject or SANs Status (Type) Summary Serial
--- --- --- --- --- ---
192.168.5.3 443 VMware ⛔ (root) [EXPIRED] 577d 0h ago DE:FD:50:2B:C5:7F:79:F4
104.154.89.105 443 badssl-fallback-unknown-subdomain-or-no-sni ⛔ (leaf) [EXPIRED] 865d 13h ago CD:BC:5A:4A:EC:97:67:B1
We include an additional scan target without a certificate to illustrate what would normally be muted/hidden away with the default scan results.
$ ./certsum --hosts 192.168.5.3,expired.badssl.com,scanme.nmap.org --show-valid-certs --show-port-scan-results --show-hosts-with-valid-certs --show-closed-ports
Total IPs from all ranges before deduping: 4
Total IPs from all ranges after deduping: 4
Beginning scan of ports: [443]
Completed port scan
Beginning certificate analysis
192.168.5.3: [443: true]
104.154.89.105: [443: true]
45.33.32.156: [None]
2600:3c01::f03c:91ff:fe18:bb2f: [None]
Completed certificate analysis
Results:
IP Address Port Subject or SANs Status (Type) Summary Serial
--- --- --- --- --- ---
192.168.5.3 443 VMware ⛔ (root) [EXPIRED] 577d 21h ago DE:FD:50:2B:C5:7F:79:F4
104.154.89.105 443 badssl-fallback-unknown-subdomain-or-no-sni ⛔ (leaf) [EXPIRED] 865d 13h ago CD:BC:5A:4A:EC:97:67:B1
From the LICENSE file:
MIT License
Copyright (c) 2020 Adam Chalkley
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
-
nmap "octet range addressing"
-
badssl.com
- https://github.com/chromium/badssl.com
- https://expired.badssl.com/
- useful test target to demo output of tools, confirm expiration validation works as intended
-
https://utcc.utoronto.ca/~cks/space/blog/tech/TLSHowMultipleChains
- good overview of the AddTrust Root CA expiration of 2020
- As a practical matter, monitoring the expiry time of all certificates provided by a TLS server seems very likely to be enough to detect multiple chain problems such as the AddTrust issue. Competent Certificate Authorities shouldn't issue server or intermediate certificates with expiry times later than their root (or intermediate) certificates, so we don't need to try to find and explicitly check those root certificates. This will also alert on expiring certificates that were provided but that can't be used to construct any chain, but you probably want to get rid of those anyway.