zjuerkzhang / udpxy Goto Github PK
View Code? Open in Web Editor NEWThis project forked from pcherenkov/udpxy
lightweight network-traffic relay daemon
This project forked from pcherenkov/udpxy
lightweight network-traffic relay daemon
# # Copyright 2008-2018 Pavel V. Cherenkov ([email protected]) # # This file is part of udpxy. # # udpxy is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # udpxy is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with udpxy. If not, see <http://www.gnu.org/licenses/>. # Summary -------------- udpxy is a UDP-to-HTTP multicast traffic relay daemon: it forwards UDP traffic from a given multicast subscription to the requesting HTTP client. udpxy is released under GPL v.3 Project status -------------- udpxy has not been extended or supported for 4+ years, having been replaced by Gigapxy - a superior enterprise-oriented product. Please see more info at <http://gigapxy.com>, thank you. Building and installing -------------- Untar the *.tgz source distribution into a directory of your choice by running tar -xzvf udpxy.X.Y-ZZ.tgz or gzip -dc udpxy.X.Y-ZZ.tgz | tar -xvf - Make sure GNU make and gcc are available (gcc 3.x and up should work, lower versions are not guaranteed to build the source correctly); for compilers other than gcc alterations to Makefile might be needed. Running 'make' without a target will build the 'release' version of udpxy (no asserts, no debug symbols, verbose mode on). Other make targets are: debug (asserts, debug symbols, verbose mode on); lean (no asserts, no debug symbols, verbose mode off); rdebug (same as 'release' but with debug symbols); ldebug (same as 'lean' but with debug symbols); Once the make has succeeded, the udpxy executable file could be copied to a location of one's choice and run from there - no additional installation steps are required. udpxy can be started with a number of configuration parameters, such as listening address/port, multicast interface name, etc. A brief usage summary is provided when udpxy is invoked from command line without parameters. HTTP commands -------------- udpxy responds to HTTP (GET) commands to receive data from a dedicated multicast group and forward it to the initiating (HTTP) connection. The command to relay traffic is in the format as below: http://<address>:<port>/<cmd>/[src_address@]<mgroup_address><sep><mgroup_port>/ [SEP] ::= :|%|~|+|-|^ i.e: http://ip:port/cmd/mgroup_address:mgroup_port/ http://ip:port/cmd/mgroup_address%mgroup_port/ http://ip:port/cmd/mgroup_address~mgroup_port/ ...... http://ip:port/cmd/mgroup_address^mgroup_port/ are acceptable and should all work in the same manner. cmd ::= udp | rtp where ip and port match the listening address/port combination of udpxy, and [src_address@]mgroup_address:mgroup_port identify the multicast group (and optional source) to subscribe to. Using 'udp' command will instruct udpxy to probe for known types of payload (such as MPEG-TS and RTP over MPEG-TS); using 'rtp' makes udpxy assume RTP over MPEG-TS payload, thus skipping the probes. udpxy will start a 'client' process for each new relay request as long as their number would not exceed a pre-set maximum (see usage summary). udpxy also supports a few additional HTTP requests, such as: http://address:port/status/ - to display basic daemon's statistics http://address:port/restart/ - to close all active connections and restart Payload types and handling -------------- udpxy recognizes MPEG-TS and RTP (over MPEG-TS) payloads within relayed packets; if udpxy encounters RTP payload it automatically 'translates' it to MPEG-TS so that media players not recognizing RTP on TCP could still play back the stream. So far, no translation is performed for other payload types. Recording MPEG traffic -------------- udpxy (in builds >0.33) includes functionality to record captured traffic as raw MPEG-TS stream into a file. This functionality is enabled through udpxrec: a bundled-in application that is linked together with udpxy (as one executable). udpxrec is invoked by a symbolic link (named udpxrec) to the udpxy executable (NB: do not rename udpxy executable). udpxrec creates MPEG files encapsulating MPEG-TS segments; most media players will *NOT* play such files; to make them playable the stream must be transcoded to MPEG-PS; vlc knows how to do such transcoding, here is a command-line example: vlc input-ts.mpg --sout="#std{access=file,mux=ps,dst=out-ps.mpg}" The resulting PS file can be played back by most media players. Portability -------------- udpxy was written to run on 'POSIX-compliant' systems; so far all builds have been tested to build and run on Linux 2.4, 2.6, 3.x (IA32, ARM) and *some* (but not all) on HP-UX 11.11 (PA-RISC 1.1, 2.0w). Build 12 of version 1.0 (Chipmunk) was ported to compile under FreeBSD 7.1 using GNU make 3.8; later builds have been tested to compile under later versions of FreeBSD (up to 9.0); Certain builds have been ported to build under cygwin; cygwin is *NOT* considered to be a fully supported platform yet there is an ongoing effort to make udpxy run on it as well. Environment variables -------------- udpxy utilizes the following environment variables to compliment its command-line options; the variables are considered for the options that most people would not need to change too often (or simply inconvenient to use from the command line). NB: If there is a command-line switch that would intersect in functionality with an environment variable, the switch *always* has the higher priority. UDPXY_RCV_TMOUT - timeout (sec) on the inbound data stream (multicast), default=5; UDPXY_DHOLD_TMOUT - timeout (sec) to hold buffered data before sending/flushing to client(s), default=1; UDPXY_SREAD_TMOUT - timeout (sec) to read from the listening socked (handling HTTP requests), default=1; UDPXY_SWRITE_TMOUT - timeout (sec) to write to the listening socked (handling HTTP requests), default=1; UDPXY_SSEL_TMOUT - timeout (sec) to select(2) in server loop (unused if pselect(2) is employed), default=30; UDPXY_LQ_BACKLOG - size of the listener socket's backlog, default=16; UDPXY_SRV_RLWMARK - low watermaek on the receiving (m-cast) socket, default=0 (not set); UDPXY_SSOCKBUF_NOSYNC - do not sync inbound (UDP) socket's buffer size (with value set by -B), default=1 (sync); UDPXY_DSOCKBUF_NOSYNC - do not sync outbound (TCP) socket's buffer size (with value set by -B), default=1 (sync); UDPXY_TCP_NODELAY - disable Nagle algorithm on the newly accepted socket (faster channel switching), default=1; UDPXY_HTTP200_FTR_FILE - append contents of the given file to the HTTP 200 response, default=none; UDPXY_HTTP200_FTR_LN - append the text (line) to the HTTP 200 response, default=none; UDPXY_ALLOW_PAUSES - if blocked on a write, keep reading data until the buffer (-B size) is full, default=disabled; UDPXY_PAUSE_MSEC - allow only N milliseconds of reading data when blocked on a write. UDPXY_CONTENT_TYPE - specify custom Content-Type in HTTP responses. --EOF--
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.