zouf / fpga-litecoin-miner Goto Github PK
View Code? Open in Web Editor NEWThis project forked from kramble/fpga-litecoin-miner
A litecoin scrypt miner implemented with FPGA on-chip memory.
License: GNU General Public License v3.0
This project forked from kramble/fpga-litecoin-miner
A litecoin scrypt miner implemented with FPGA on-chip memory.
License: GNU General Public License v3.0
An Open Source FPGA Litecoin (scrypt) miner This code is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. Project includes code from https://github.com/progranism/Open-Source-FPGA-Bitcoin-Miner Scrypt algorithm is based on https://github.com/ckolivas/cgminer/blob/master/scrypt.c Discussion is at https://forum.litecoin.net/index.php/topic,5162.0.html Special thanks to fpgaminer for the original bitcoin mining code, teknohog for his LX150 code, also OrphanedGland, udif, TheSeven, makomk, and newMeat1 as credited on the fpgaminer bitcoin thread https://bitcointalk.org/index.php?topic=9047.0 and ngzhang for his Icarus/Lancelot boards and github. The scrypt algorithm is implemented using on-chip FPGA RAM, so should be portable to any FPGA large enough to support 1024kBit of RAM (512kBit with interpolation, eg DE0-Nano). External RAM support could be added, but requires the relevant RAM controller for the board. Performance will be limited by RAM bandwidth. The code is proof of concept, further optimisation is required (only a small performance gain is to be expected though). Internal (pll derived) clock is only 25MHz, limited by the salsa_core. Further pipelining would increase this, but gives no performance gain since the scrypt algorithm is essentially serial. RAM is also clocked at this speed, a faster clock would help improve performance a little (and is essential for external RAM) at the expense of complexity. Multiple cores are best implemented using the 512kBit scratchpad as the slower individual throughput is more than compensated by doubling the number of cores supported. MULTICORE is now the default. This only affects nonce handling so its safe to use with singe cores which will simply scan a more limited range (the top nibble is fixed at 0). To revert to the previous behaviour set the NOMULTICORE macro (but ONLY if using a single core). Contents -------- DE2-115-Single Single full scratchpad core, this is the simplest implementation. DE0-Nano Uses interpolation as the full scratchpad does not fit (this is the same as LOOKUP_GAP=2 in GPU). Test results ... 1.16 kHash/sec at 25Mhz (this is Fmax at 85C/Slow model) 2.09 kHash/sec at 45Mhz Fmax is 25MHz, so anything greater may not work reliably on your device. BEWARE the onboard psu regulators run HOT to VERY HOT. You may fry them! experimental New code, not all fully working. ICARUS-LX150 A Xilinx LX150 multicore port for ngzhang's Icarus/Lancelot boards. scripts Mining scripts. source Verilog source code. Ztex and Cairnsmore CM1 ----------------------- Ports for the Ztex 1.15y and Cairnsmore CM1 quad boards are available in the experimental folder. Both achieve around 60kHash/sec (total for all four FPGA devices) using a single core and 16 threads (identical to the current ICARUS-LX150 code). A customised version of cgminer 3.1.1 must be used (see experimental/Ztex-1-15y/cgminer-3.1.1 which supports both boards). Bitstreams are linked in the respective READMEs. Usage ----- The Altera ports (DE0-Nano) require installation of Quartus II software. For MS Windows set mining pool connection details by editing scripts/config.tcl then run scripts/mine.bat This uses getwork protocol and timeouts may occur. There are some configuration switches in mine.tcl, eg it can run in test mode which sends historical block headers to the fpga with known nonce results. Use of a stratum proxy server is recommended.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.