alliedvision / linux_nvidia_jetson Goto Github PK

Allied Vision CSI-2 camera driver for NVIDIA Jetson Systems. Currently supporting Nano, TX2, AGX Xavier, and Xavier NX. Support for TX2 NX coming soon.

Shell 0.24% Makefile 0.28% C 98.24% Assembly 0.87% C++ 0.02% Perl 0.17% Awk 0.01% Python 0.11% sed 0.01% Yacc 0.01% Lex 0.01% UnrealScript 0.01% SmPL 0.01% Gherkin 0.01% XS 0.01% Roff 0.02% Clojure 0.01% M4 0.01% Raku 0.01%

tx2 csi-2 camera driver allied-vision alvium nano nvidia-jetson-tx2 nvidia-nano jetson-nano

linux_nvidia_jetson's People

Contributors

Stargazers

Watchers

Forkers

eli-davis simaoppcastro bernardoluck kjoelovelife pascalfust zjj0801 team-linux2 stanxt kamelabdelouahab dbhu sea87321 amarburg bmnky wuyuanyi135 maxpark franskafula bqm1111 aslm ljthink gandalffoogray wanktpd suburbanmarine kitoborcom wahtari emcotek harelhel stevelin168 acfrmarine wolegeyun vantainguyen ericbin1 sbasei richardschrader netforgetone longyi1234 kun-linux ldenninger xin350 kanan99

linux_nvidia_jetson's Issues

can't found /dev/videox

I use this driver and recompile the kernel, but avt_csi2 driver didn't work. I can't found device in /dev directory.

how to change the frame rate of camera

while transmitting over network , i could see the frame rate is 109. but when the following command is used: v4l2-ctl -L
i am not able to set the frame rate as i can't see any option. check the parameters below:

User Controls

                 brightness 0x00980900 (int)    : min=0 max=63 step=1 default=0 value=0 flags=slider
                 saturation 0x00980902 (int)    : min=0 max=200 step=1 default=100 value=100 flags=slider
                        hue 0x00980903 (int)    : min=-4000 max=4000 step=1 default=0 value=0 flags=slider
         auto_white_balance 0x0098090c (bool)   : default=0 value=0
              white_balance 0x0098090d (button) : flags=write-only, execute-on-write
                red_balance 0x0098090e (int)    : min=0 max=8000 step=1 default=1930 value=1930 flags=slider
               blue_balance 0x0098090f (int)    : min=0 max=8000 step=1 default=1500 value=1500 flags=slider
                      gamma 0x00980910 (int)    : min=40 max=240 step=5 default=100 value=100 flags=slider
                   exposure 0x00980911 (int)    : min=63912 max=2147483647 step=15 default=5000000 value=5000007 flags=slider
                  auto_gain 0x00980912 (bool)   : default=0 value=0
                       gain 0x00980913 (int)    : min=0 max=1138 step=10 default=0 value=0 flags=slider
                  reverse_x 0x00980914 (bool)   : default=0 value=0
                  reverse_y 0x00980915 (bool)   : default=0 value=0
      frame_timeout_enabled 0x009809c8 (bool)   : default=1 value=1
              frame_timeout 0x009809c9 (int)    : min=100 max=12000 step=1 default=12000 value=12000
   stride_alignment_enabled 0x009809ca (bool)   : default=1 value=1
     crop_alignment_enabled 0x009809cb (bool)   : default=1 value=1

Camera Controls

              exposure_auto 0x009a0901 (menu)   : min=0 max=1 default=1 value=1
			0: Auto Mode
			1: Manual Mode
          exposure_absolute 0x009a0902 (int64)  : min=1 max=100000 step=1 default=1 value=50
          exposure_auto_min 0x009a0928 (int)    : min=63912 max=2147483647 step=15 default=63912 value=63912 flags=slider
          exposure_auto_max 0x009a0929 (int)    : min=63912 max=2147483647 step=15 default=2147483647 value=2147483647 flags=slider
              auto_gain_min 0x009a092a (int)    : min=0 max=1138 step=10 default=0 value=0 flags=slider
              auto_gain_max 0x009a092b (int)    : min=0 max=1138 step=10 default=1138 value=1138 flags=slider
                bypass_mode 0x009a2064 (intmenu): min=0 max=1 default=0 value=0
			0: 0 (0x0)
			1: 1 (0x1)
            override_enable 0x009a2065 (intmenu): min=0 max=1 default=0 value=0
			0: 0 (0x0)
			1: 1 (0x1)
               height_align 0x009a2066 (int)    : min=1 max=16 step=1 default=1 value=1
                 size_align 0x009a2067 (intmenu): min=0 max=2 default=0 value=0
			0: 1 (0x1)
			1: 65536 (0x10000)
			2: 131072 (0x20000)
           write_isp_format 0x009a2068 (bool)   : default=0 value=0
   sensor_signal_properties 0x009a2069 (u32)    : min=0 max=4294967295 step=1 default=0 [30][18] flags=read-only, has-payload
    sensor_image_properties 0x009a206a (u32)    : min=0 max=4294967295 step=1 default=0 [30][16] flags=read-only, has-payload
  sensor_control_properties 0x009a206b (u32)    : min=0 max=4294967295 step=1 default=0 [30][36] flags=read-only, has-payload
          sensor_dv_timings 0x009a206c (u32)    : min=0 max=4294967295 step=1 default=0 [30][16] flags=read-only, has-payload
           low_latency_mode 0x009a206d (bool)   : default=0 value=0
           preferred_stride 0x009a206e (int)    : min=0 max=65535 step=1 default=0 value=0
               sensor_modes 0x009a2082 (int)    : min=0 max=30 step=1 default=30 value=1 flags=read-only

Error: avt-nvidia-l4t-kernel : Conflicts: nvidia-l4t-kernel but 4.9.253-tegra-32.7.1-20220219090344 is to be installed

Hi all,
I am installing csi2 driver for my Jetson TX2 (Jetpack 4.6.1, l4t-32.7.1) with release 4.0.0~beta1, and I am facing an error when copy, extract tarball to target device and run command: sudo ./install.sh:

acanus@ubuntu:~/github/AlliedVision_NVidia_xavier_L4T_32.7.1_4.0.0~beta1$ sudo ./install.sh -y
Allied Vision MIPI CSI-2 camera driver for NVidia Jetson (kernel 4.9.253)
Extracting repository:
Release.gpg
KEY.gpg
Release
Packages
avt-nvidia-l4t-kernel-dtbs_4.9.253-tegra-32.7.1-4.0.0~beta1_arm64.deb
avt-nvidia-l4t-kernel-headers_4.9.253-tegra-32.7.1-4.0.0~beta1_arm64.deb
avt-nvidia-l4t-bootloader_32.7.1-4.0.0~beta1_arm64.deb
avt-nvidia-l4t-kernel_4.9.253-tegra-32.7.1-4.0.0~beta1_arm64.deb
Importing Repository:
OK
deb file:/opt/avt/packages ./
Get:1 file:/opt/avt/packages ./ InRelease
Ign:1 file:/opt/avt/packages ./ InRelease
Get:2 file:/opt/avt/packages ./ Release [816 B]
Get:2 file:/opt/avt/packages ./ Release [816 B]
Get:3 file:/opt/avt/packages ./ Release.gpg [691 B]
Get:3 file:/opt/avt/packages ./ Release.gpg [691 B]
Hit:4 https://repo.download.nvidia.com/jetson/common r32.7 InRelease
Hit:5 https://repo.download.nvidia.com/jetson/t186 r32.7 InRelease
Hit:6 http://ports.ubuntu.com/ubuntu-ports bionic InRelease
Hit:7 http://ports.ubuntu.com/ubuntu-ports bionic-updates InRelease
Hit:8 http://ports.ubuntu.com/ubuntu-ports bionic-backports InRelease
Get:9 http://ports.ubuntu.com/ubuntu-ports bionic-security InRelease [88.7 kB]
Get:10 http://ports.ubuntu.com/ubuntu-ports bionic-security/main arm64 Packages [1,230 kB]
Get:11 http://ports.ubuntu.com/ubuntu-ports bionic-security/main Translation-en [392 kB]
Fetched 1,711 kB in 4s (452 kB/s)
Reading package lists... Done
Installing packages:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
 avt-nvidia-l4t-kernel : Conflicts: nvidia-l4t-kernel but 4.9.253-tegra-32.7.1-20220219090344 is to be installed
E: Unable to correct problems, you have held broken packages.

Here some info of target device:

acanus@ubuntu:~$ apt show nvidia-jetpack -a
Package: nvidia-jetpack
Version: 4.6.2-b5
Priority: standard
Section: metapackages
Maintainer: NVIDIA Corporation
Installed-Size: 199 kB
Depends: nvidia-cuda (= 4.6.2-b5), nvidia-opencv (= 4.6.2-b5), nvidia-cudnn8 (= 4.6.2-b5), nvidia-tensorrt (= 4.6.2-b5), nvidia-visionworks (= 4.6.2-b5), nvidia-container (= 4.6.2-b5), nvidia-vpi (= 4.6.2-b5), nvidia-l4t-jetson-multimedia-api (>> 32.7-0), nvidia-l4t-jetson-multimedia-api (<< 32.8-0)
Homepage: http://developer.nvidia.com/jetson
Download-Size: 29.4 kB
APT-Sources: https://repo.download.nvidia.com/jetson/t186 r32.7/main arm64 Packages
Description: NVIDIA Jetpack Meta Package

Package: nvidia-jetpack
Version: 4.6.1-b110
Priority: standard
Section: metapackages
Maintainer: NVIDIA Corporation
Installed-Size: 199 kB
Depends: nvidia-cuda (= 4.6.1-b110), nvidia-opencv (= 4.6.1-b110), nvidia-cudnn8 (= 4.6.1-b110), nvidia-tensorrt (= 4.6.1-b110), nvidia-visionworks (= 4.6.1-b110), nvidia-container (= 4.6.1-b110), nvidia-vpi (= 4.6.1-b110), nvidia-l4t-jetson-multimedia-api (>> 32.7-0), nvidia-l4t-jetson-multimedia-api (<< 32.8-0)
Homepage: http://developer.nvidia.com/jetson
Download-Size: 29.4 kB
APT-Sources: https://repo.download.nvidia.com/jetson/t186 r32.7/main arm64 Packages
Description: NVIDIA Jetpack Meta Package

Please help me out, thanks in advance.

Installing Drivers on Xavier NX (Jetpack 4.4) failed

Hi,

I have attempted to install the Xavier NX drivers, but the cameras cannot be recognized (no "video0" in /dev directory). I've tried with both the C-158c and the C-319c cameras from the Alvium range.

I've tried both the Xavier NX Dev Kit and the Production model, but neither have worked. All other features on the Xavier (e.g Wifi/BT) continue to work, but cameras cannot be recognized. Any ideas why this might be?

Could you confirm in which configurations you know the driver works? Perhaps it is only stable with the Jetson Nano?

Support for Nvidia Jetson L4T 32.4.3

Hi,

We are using nvidia Jetson nano/NX L4T32.4.3 BSPs for our custom BSP on custom carrier board. One of our customers wants to use Allied Vision Camera with drivers https://github.com/alliedvision/linux_nvidia_jetson. Can you please confirm you have support for L4T 32.4.3 ? if supports available, can we install driver on a running system as mentioned ?

qv4l2 Segmentation fault

With this new driver qv4l2 segfaults on start.

The driver starts:

tecnox@nano-labo:~$ dmesg|grep ALV
[    8.389585] ALVIUM 1800 C-1240c 7-3c: ioctl_queryctrl:2853: control 'Contrast' not supported by firmware
[    8.448969] ALVIUM 1800 C-1240c 7-3c: ioctl_queryctrl:3315: control 'Sharpness' not supported by firmware
[    8.524170] ALVIUM 1800 C-1240c 7-3c: ioctl_queryctrl:3731: control 'exposure active line' not supported by firmware
[    8.525199] ALVIUM 1800 C-1240c 7-3c: ioctl_queryctrl:3768: control 'exposure active line' not supported by firmware
[    8.529562] ALVIUM 1800 C-1240c 7-3c: ioctl_queryctrl:3799: control 'exposure active line' not supported by firmware
[    8.822844] ALVIUM 1800 C-1240c 7-3c: avt_init_mode:6285: Camera supported lane counts value: 0xb
[    8.951982] vi 54080000.vi: subdev ALVIUM 1800 C-1240c 7-3c bound
[    8.958710] avt_csi2 7-003c: sensor ALVIUM 1800 C-1240c 7-3c registered

But running qt4v2:

tecnox@nano-labo:~$ qv4l2 
Opening in BLOCKING MODE
Segmentation fault (core dumped)

This didn't happened before on Jetpack 4.4.x.

Building as non-root does not work

Building the l4t-34.1.1-5.0.1-beta-1 as non-root does not work as intended. The last step fails.

INFO     Signing kernel image for t19x
ERROR    Error 1 executing `/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/l4t_sign_image.sh --file Image.t19x --chip 0x19 --type kernel`
ERROR    stdout:
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/tegraflash.py --chip 0x19 --key  --cmd sign Image.t19x kernel
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands

[   0.0018 ] Generating signature
[   0.0044 ] tegrasign_v3.py --key  --getmode mode.txt
[   0.0045 ] Assuming zero filled SBK key : not reading
[   0.0039 ] header_magic: 4d5a0091
[   0.0262 ] tegrahost_v2 --chip 0x19 --align 1_Image_aligned.t19x
[   0.0267 ]
[   0.0283 ] tegrahost_v2 --chip 0x19 0 --magicid KRNL --appendsigheader 1_Image_aligned.t19x zerosbk
[   0.0288 ] adding BCH for 1_Image_aligned.t19x
[   0.5900 ]
[   0.5933 ] tegrasign_v3.py --key  --list 1_Image_aligned_sigheader.t19x_list.xml
[   0.5935 ] Assuming zero filled SBK key : not reading
[   0.6483 ] tegrahost_v2 --chip 0x19 0 --updatesigheader 1_Image_aligned_sigheader.t19x.encrypt 1_Image_aligned_sigheader.t19x.hash zerosbk
[   0.9848 ]
[   1.0249 ] Signed file: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/kernel/avt/kernel/debian/out/boot/Image_sigheader.t19x.encrypt
l4t_sign_image.sh: Generate header for Image_sigheader.t19x.encrypt
l4t_sign_image.sh: chip 0x19: add 0x218ca00 to offset  0x8 in sig file
l4t_sign_image.sh: Generate 16-byte-size-aligned base file for Image_sigheader.t19x.encrypt
l4t_sign_image.sh: the sign header is saved at Image.t19x.sig

stderr:
rm: cannot remove '/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/__pycache__/tegraflash_internal.cpython-36.pyc': Permission denied
rm: cannot remove '/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/__pycache__/tegrasign_v3_util.cpython-36.pyc': Permission denied
rm: cannot remove '/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/__pycache__/t194.cpython-36.pyc': Permission denied

Traceback (most recent call last):
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/tools.py", line 81, in execute
    raise RuntimeError(f'Subprocess returned error {sub.returncode}')
RuntimeError: Subprocess returned error 1

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "./build.py", line 5, in <module>
    main()
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/build.py", line 138, in main
    deploy.deploy(args, brd)
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/deploy.py", line 300, in deploy
    build_kernel_deb(args, board)
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/deploy.py", line 39, in build_kernel_deb
    t.execute([board.build_dir / f"Linux_for_Tegra/l4t_sign_image.sh",'--file','Image.t19x','--chip','0x19','--type','kernel'],cwd=board.build_dir / "Linux_for_Tegra/kernel/avt/kernel/debian/out/boot/")
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/tools.py", line 84, in execute
    raise RuntimeError(f'Error {str(err)} executing `{" ".join(str(x) for x in args)}`') from err
RuntimeError: Error Subprocess returned error 1 executing `/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/l4t_sign_image.sh --file Image.t19x --chip 0x19 --type kernel`

Separate kernel module

Hi,

I had a look at this driver, and for us it is not really usable. We have a different L4T version for the Xavier. While in theory we could switch to this kernel, this is not desirable, and might lead to future problems, since another sensor might require using their kernel, leading to a situation where only one sensor can be used at a time.

A solution to the above problem would be to restructure this camera driver into an external kernel module. This would mean that the sensor driver can be compiled as a kernel module for different kernels. One would require the kernel sourcecode for the specific board, and then download the allied vision kernel module sourcecode and build the kernel module specific for their kernel. This would solve the issue of keeping up with the xavier linux kernel each time a L4T release is made. It would also solve the issue of having to support 4 different git repositories with modifed kernels for each board.

Is this something you could provide?

Regards,
Windel

Missing avt_build/resources/gcc folder ?

Hi,
During the setup step of Master branch (or l4t-32.5.1 branch), there's following error :

/devel/RTR/SW/alliedvision_linux_nvidia_jetson/avt_build/resources/gcc/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz: No such file or directory
>> [F]...Failed to download gcc toolchain from url https://developer.nvidia.com/embedded/dlc/l4t-gcc-7-3-1-toolchain-64-bit...
>> Failed...
>> [i]...Script execution...
>> Failed...

It seems that the folder gcc within avt_build/resources/ is an empty folder and was not kept when pushing to github.

Manually create avt_build/resources/gcc helps to resolve the issue. I'm not sure if it is a correct solution.

Best Regards,
Pascal.

Wrong location of deployed kernel modules ?

Hi,

The install.sh script seems to unpack kernel modules into /lib/modules/4.9.201. Meanwhile the default modules location is /lib/modules/4.9.201-tegra. Is it an expected behavior ?

Best regards,
Pascal.

Nvarguscamerasrc

Is there any support for direct gpu capture on Xavier NX? It is disappointing to not be able to take advantage of the gpu with the Alvium and Xavier.

Method A: Use precompiled binaries where is the precompiled tar?

We bought several CSI cameras from your company and we are searching for the pre-compiled driver and tar file.

In your README you wrote:
Method A: Use precompiled binaries

Install the precompiled kernel including driver and installation instructions.
For Jetson Nano, please use the file containing "a02" for A02 carrier boards and the other file for B01 carrier boards.

Extract the tarball on a host PC.

The tarball contains helper scripts and another tarball with the precompiled binaries named AlliedVision_NVidia_L4T_32.5.1_.tar.gz.

It would be useful that we know where we can download the AlliedVision_NVidia_L4T_32.5.1_.tar.gz file?

Instructions are not clear

I think that the README must be updated

In prerequisites, it says install JetPack 4.4 (L4T 32.4.2) , however Jetpack 4.4 uses (L4T 32.4.3) . The version that uses L4T 32.4.2 is the JetPack 4.4 Developer Preview
Why is necessary to update and upgrade? (Instruction 2). After that you get L4T 32.4.4, and the precompiled kernels are only for L4T 32.4.2

One one camera out of two is initialized on Jetson B01

I am trying to connect two alvium 1500 cameras on jetson nano B01 with two Mipi CSI connectors. I tried the preinstalled 4.2.2 SD image from Allied Vision webpage, and I tried the newest jetpack 4.4 pathced with the alvium precompiled drivers. The 4.2.2 image does not acknowledge the existance of the second csi (as seen by dmesg | grep csi). Also trying the connect a Pi Noir 2 camera to the second CSI plug, fails with version 4.2.2. I have to use minimum 4.3 to use the second csi.

Jetpack 4.4 with alvium drivers gives me the following errors related to "dmesg | grep csi":
[ 1.739567] avt_csi2 0-003c: i2c read failed (-121)
[ 1.744500] avt_csi2 0-003c: avt_csi2_probe: read_cci_registers failed: -121
[ 1.751577] avt_csi2: probe of 0-003c failed with error -121

and for the one that works:

[ 1.764955] avt_csi2 6-003c: cci layout version: 10000
[ 1.764959] avt_csi2 6-003c: cci device capabilities: 117
[ 1.764962] avt_csi2 6-003c: cci device guid: 00012C00329E
[ 1.764965] avt_csi2 6-003c: cci gcprm_address: 0x300
[ 1.765328] avt_csi2 6-003c: bcrm version (driver): 0x10000 (maj: 0x1 min: 0x0)
[ 1.765333] avt_csi2 6-003c: bcrm version (camera): 0x10000 (maj: 0x1 min: 0x0)
[ 1.776863] avt_csi2 6-003c: wrong GENCP CRC value! calculated = 0xdf6b807f, received = 0xee4b04d6
[ 1.776868] avt_csi2 6-003c: gcprm layout version: 10000
[ 1.776871] avt_csi2 6-003c: gcprm out buf addr: c00
[ 1.776874] avt_csi2 6-003c: gcprm out buf size: 400
[ 1.776877] avt_csi2 6-003c: gcprm in buf addr: 800
[ 1.776880] avt_csi2 6-003c: gcprm in buf size: 400
[ 1.776886] avt_csi2 6-003c: gcprm version (driver): 0x10000 (maj: 0x1 min: 0x0)
[ 1.776890] avt_csi2 6-003c: gcprm version (camera): 0x10000 (maj: 0x1 min: 0x0)
[ 1.779243] avt_csi2 6-003c: ioctl_queryctrl:2281: control 'Contrast' not supported by firmware
[ 1.779690] avt_csi2 6-003c: ioctl_queryctrl:2423: control 'Saturation' not supported by firmware
[ 1.780139] avt_csi2 6-003c: ioctl_queryctrl:2499: control 'Hue' not supported by firmware
[ 1.780585] avt_csi2 6-003c: ioctl_queryctrl:2359: control 'White balance Auto' not supported by firmware
[ 1.781032] avt_csi2 6-003c: ioctl_queryctrl:2394: control 'White balance' not supported by firmware
[ 1.781477] avt_csi2 6-003c: ioctl_queryctrl:2573: control 'Red balance' not supported by firmware
[ 1.781924] avt_csi2 6-003c: ioctl_queryctrl:2658: control 'Blue balance' not supported by firmware
[ 1.791124] avt_csi2 6-003c: ioctl_queryctrl:2743: control 'Sharpness' not supported by firmware
[ 2.402064] avt_csi2 6-003c: sensor_common_parse_control_props:default_gain:property missing
[ 2.410544] avt_csi2 6-003c: sensor_common_parse_control_props:default_framerate:property missing
[ 2.419425] avt_csi2 6-003c: sensor_common_parse_control_props:default_exp_time:property missing
[ 2.691743] avt_csi2 6-003c: sensor avt_csi2 6-003c registered
[ 2.858045] vi 54080000.vi: subdev nvcsi--2 bound
[ 2.858059] vi 54080000.vi: subdev avt_csi2 6-003c bound
[ 2.862636] vi 54080000.vi: subdev nvcsi--1 bound

The part here:
[ 2.858045] vi 54080000.vi: subdev nvcsi--2 bound
[ 2.862636] vi 54080000.vi: subdev nvcsi--1 bound
shows that both ports are seen. In the image 4.2.2, it only sees nvcsi--1.

i2cdetect -l
i2c-3 unknown 7000c700.i2c N/A
i2c-1 unknown 7000c400.i2c N/A
i2c-6 unknown Tegra I2C adapter N/A
i2c-4 unknown 7000d000.i2c N/A
i2c-2 unknown 7000c500.i2c N/A
i2c-0 unknown 7000c000.i2c N/A
i2c-5 unknown 7000d100.i2c N/A

setup.sh failed to download gcc

guille@monster:~/linux_nvidia_jetson/avt_build$ ./setup.sh work_dir nano
>> [i]...Running script for preparing Linux4Tegra setup...
>> [d]...dedicated for L4T: R32.5.1 and Jetson TX2/XAVIER...
/home/guille/linux_nvidia_jetson/avt_build/resources/gcc/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz: No such file or directory
>> [F]...Failed to download gcc toolchain from url https://developer.nvidia.com/embedded/dlc/l4t-gcc-7-3-1-toolchain-64-bit...
>> Failed...
>> [i]...Script execution...
>> Failed...

It works downloading manually to resources/gcc

L4T 32.4.3

Would you mind restructuring this project so that kerneltree contains only the files you add/change and the rest can be taken from kernel_src.tbz2 provided by Nvidia. Tried to build this against L4T 32.4.3 and not only camera didn't work but also lost Wifi

Unable to Build linux_nvidia_jetson-l4t-32.5.1-2.1.0 on Jetson Nano B01 (4GB)

After download and running the setup (with "./setup Documents nano") successfully I get the following message on running the step 3:

itec@itec-desktop:~/Downloads/linux_nvidia_jetson-l4t-32.5.1-2.1.0/avt_build$ sudo ./build.sh Documents nano all all

[i]...Running script for building Linux4Tegra setup...
[d]...dedicated for L4T: R32.5.1 and Jetson ...
[i]...Export variables for compiling...
[d]...ARCH=arm64...
[d]...CROSS_COMPILE=/home/itec/Downloads/linux_nvidia_jetson-l4t-32.5.1-2.1.0/avt_build/Documents/gcc/gcc-7.3.1-aarch64/bin/aarch64-linux-gnu-...
[d]...INSTALL_MOD_PATH=/home/itec/Downloads/linux_nvidia_jetson-l4t-32.5.1-2.1.0/avt_build/Documents/Linux_for_Tegra/rootfs...
[i]...Clean kernel sources...
sudo: time: command not found
[d]...Could not clean kernel sources...
Failed...
[i]...Script execution...
Failed...

Any help is apprecciated.

Bootloader error installing 4.0.0 Driver on Jetson Nano

I'm hoping to use the newly-released 4.0.0 driver on my Jetson Nano Production Module running JetPack 4.6.1 and L4T version 32.7.1, however running the installation script from the precompiled tarball gives the following output:

Allied Vision MIPI CSI-2 camera driver for NVidia Jetson (kernel 4.9.253)
Install kernel driver (y/n)? y


Installing...
Extracting repository:
Release.gpg
KEY.gpg
Release
Packages
avt-nvidia-l4t-kernel_4.9.253-
tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb
avt-nvidia-l4t-kernel-dtbs_4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb
avt-nvidia-l4t-kernel-headers_4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb
avt-nvidia-l4t-bootloader_32.7.1-4.0.0~gc3fa7ac49_arm64.deb
Importing Repository:
OK
deb file:/opt/avt/packages ./
Get:1 file:/opt/avt/packages ./ InRelease
Ign:1 file:/opt/avt/packages ./ InRelease
Get:2 file:/opt/avt/packages ./ Release [816 B]
Get:2 file:/opt/avt/packages ./ Release [816 B]
Get:3 file:/opt/avt/packages ./ Release.gpg [691 B]
Get:3 file:/opt/avt/packages ./ Release.gpg [691 B]
Get:4 file:/opt/avt/packages ./ Packages [3,711 B]                                                    
Hit:5 https://repo.download.nvidia.com/jetson/common r32.7 InRelease                                  
Hit:6 http://ports.ubuntu.com/ubuntu-ports bionic InRelease                                          
Hit:7 https://repo.download.nvidia.com/jetson/t210 r32.7 InRelease                                    
Hit:8 http://ports.ubuntu.com/ubuntu-ports bionic-updates InRelease                  
Hit:9 http://ports.ubuntu.com/ubuntu-ports bionic-backports InRelease            
Hit:10 http://ports.ubuntu.com/ubuntu-ports bionic-security InRelease            
Reading package lists... Done                      
Installing packages:
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following packages were automatically installed and are no longer required:
  apt-clone archdetect-deb bogl-bterm busybox-static cryptsetup-bin dpkg-repack
  gir1.2-timezonemap-1.0 gir1.2-xkl-1.0 grub-common kde-window-manager kinit kio kpackagetool5
  kwayland-data kwin-common kwin-data kwin-x11 libdebian-installer4 libkdecorations2-5v5
  libkdecorations2private5v5 libkf5activities5 libkf5attica5 libkf5completion-data libkf5completion5
  libkf5declarative-data libkf5declarative5 libkf5doctools5 libkf5globalaccel-data libkf5globalaccel5
  libkf5globalaccelprivate5 libkf5idletime5 libkf5jobwidgets-data libkf5jobwidgets5
  libkf5kcmutils-data libkf5kcmutils5 libkf5kiocore5 libkf5kiontlm5 libkf5kiowidgets5
  libkf5newstuff-data libkf5newstuff5 libkf5newstuffcore5 libkf5package-data libkf5package5
  libkf5plasma5 libkf5quickaddons5 libkf5solid5 libkf5solid5-data libkf5sonnet5-data
  libkf5sonnetcore5 libkf5sonnetui5 libkf5textwidgets-data libkf5textwidgets5 libkf5waylandclient5
  libkf5waylandserver5 libkf5xmlgui-bin libkf5xmlgui-data libkf5xmlgui5 libkscreenlocker5
  libkwin4-effect-builtins1 libkwineffects11 libkwinglutils11 libkwinxrenderutils11 libqgsttools-p1
  libqt5designer5 libqt5help5 libqt5multimedia5 libqt5multimedia5-plugins libqt5multimediaquick-p5
  libqt5multimediawidgets5 libqt5opengl5 libqt5quickwidgets5 libqt5sql5 libqt5test5 libxcb-composite0
  libxcb-cursor0 libxcb-damage0 os-prober python3-dbus.mainloop.pyqt5 python3-icu python3-pam
  python3-pyqt5 python3-pyqt5.qtsvg python3-pyqt5.qtwebkit qml-module-org-kde-kquickcontrolsaddons
  qml-module-qtmultimedia qml-module-qtquick2 rdate tasksel tasksel-data
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  nvidia-l4t-initrd nvidia-l4t-tools nvidia-l4t-xusb-firmware
The following packages will be REMOVED:
  nvidia-l4t-bootloader nvidia-l4t-jetson-io nvidia-l4t-kernel nvidia-l4t-kernel-dtbs
  nvidia-l4t-kernel-headers
The following NEW packages will be installed:
  avt-nvidia-l4t-bootloader avt-nvidia-l4t-kernel avt-nvidia-l4t-kernel-dtbs
  avt-nvidia-l4t-kernel-headers
The following packages will be upgraded:
  nvidia-l4t-initrd nvidia-l4t-tools nvidia-l4t-xusb-firmware
3 upgraded, 4 newly installed, 5 to remove and 188 not upgraded.
Need to get 7,448 kB/36.5 MB of archives.
After this operation, 2,322 kB disk space will be freed.
Get:1 file:/opt/avt/packages ./ avt-nvidia-l4t-bootloader 32.7.1-4.0.0~gc3fa7ac49 [736 kB]
Get:2 https://repo.download.nvidia.com/jetson/t210 r32.7/main arm64 nvidia-l4t-initrd arm64 32.7.2-20220420143418 [7,169 kB]
Get:3 file:/opt/avt/packages ./ avt-nvidia-l4t-kernel 4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49 [20.0 MB]
Get:4 file:/opt/avt/packages ./ avt-nvidia-l4t-kernel-dtbs 4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49 [123 kB]
Get:5 https://repo.download.nvidia.com/jetson/t210 r32.7/main arm64 nvidia-l4t-xusb-firmware arm64 32.7.2-20220420143418 [87.7 kB]
Get:6 https://repo.download.nvidia.com/jetson/t210 r32.7/main arm64 nvidia-l4t-tools arm64 32.7.2-20220420143418 [191 kB]
Get:7 file:/opt/avt/packages ./ avt-nvidia-l4t-kernel-headers 4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49 [8,166 kB]
Fetched 7,448 kB in 1s (9,397 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
(Reading database ... 180574 files and directories currently installed.)
Removing nvidia-l4t-bootloader (32.7.1-20220219090432) ...
Removing nvidia-l4t-jetson-io (32.7.1-20220219090432) ...
Removing nvidia-l4t-kernel-dtbs (4.9.253-tegra-32.7.1-20220219090432) ...
Removing nvidia-l4t-kernel-headers (4.9.253-tegra-32.7.1-20220219090432) ...
Removing nvidia-l4t-kernel (4.9.253-tegra-32.7.1-20220219090432) ...
(Reading database ... 163301 files and directories currently installed.)
Preparing to unpack .../0-nvidia-l4t-initrd_32.7.2-20220420143418_arm64.deb ...
Unpacking nvidia-l4t-initrd (32.7.2-20220420143418) over (32.7.1-20220219090432) ...
Preparing to unpack .../1-nvidia-l4t-xusb-firmware_32.7.2-20220420143418_arm64.deb ...
Unpacking nvidia-l4t-xusb-firmware (32.7.2-20220420143418) over (32.7.1-20220219090432) ...
Preparing to unpack .../2-nvidia-l4t-tools_32.7.2-20220420143418_arm64.deb ...
Unpacking nvidia-l4t-tools (32.7.2-20220420143418) over (32.7.1-20220219090432) ...
Selecting previously unselected package avt-nvidia-l4t-bootloader.
Preparing to unpack .../3-avt-nvidia-l4t-bootloader_32.7.1-4.0.0~gc3fa7ac49_arm64.deb ...
Unpacking avt-nvidia-l4t-bootloader (32.7.1-4.0.0~gc3fa7ac49) ...
Selecting previously unselected package avt-nvidia-l4t-kernel.
Preparing to unpack .../4-avt-nvidia-l4t-kernel_4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb ...
Unpacking avt-nvidia-l4t-kernel (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Selecting previously unselected package avt-nvidia-l4t-kernel-dtbs.
Preparing to unpack .../5-avt-nvidia-l4t-kernel-dtbs_4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb ...
Unpacking avt-nvidia-l4t-kernel-dtbs (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Selecting previously unselected package avt-nvidia-l4t-kernel-headers.
Preparing to unpack .../6-avt-nvidia-l4t-kernel-headers_4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49_arm64.deb ...
Unpacking avt-nvidia-l4t-kernel-headers (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Setting up nvidia-l4t-tools (32.7.2-20220420143418) ...
Setting up avt-nvidia-l4t-bootloader (32.7.1-4.0.0~gc3fa7ac49) ...
Traceback (most recent call last):
  File "/var/lib/dpkg/info/avt-nvidia-l4t-bootloader.config", line 307, in <module>
    main()
  File "/var/lib/dpkg/info/avt-nvidia-l4t-bootloader.config", line 292, in main
    db.subst('avt-nvidia-l4t-bootloader/target-board', 'default-board-configuration', config_list[0])
IndexError: list index out of range
dpkg: error processing package avt-nvidia-l4t-bootloader (--configure):
 installed avt-nvidia-l4t-bootloader package post-installation script subprocess returned error exit status 1
Setting up avt-nvidia-l4t-kernel (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
3448-300-0002--1--jetson-nano-devkit-emmc-
Setting up avt-nvidia-l4t-kernel-dtbs (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Setting up nvidia-l4t-xusb-firmware (32.7.2-20220420143418) ...
3448-300-0002--1--jetson-nano-devkit-emmc-
Starting xusb firmware post-install procedure.
Update xusb firmware completed.
Reboot the target system for changes to take effect.
Setting up nvidia-l4t-initrd (32.7.2-20220420143418) ...
Setting up avt-nvidia-l4t-kernel-headers (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Processing triggers for avt-nvidia-l4t-kernel (4.9.253-tegra-32.7.1-4.0.0~gc3fa7ac49) ...
Errors were encountered while processing:
 avt-nvidia-l4t-bootloader
E: Sub-process /usr/bin/dpkg returned an error code (1)
Reboot now (y/n)? n

At a glance, it seems like there is some issue with the bootloader.config file, though I'm not sure how to interpret this. I have used a prior release of the Allied Vision camera drivers (version 2.0.0) on this same device, running JetPack 4.5.1, and I have not seen this before.

Any insights or assistance in installing this latest release for JetPack 4.6.1 would be greatly appreciated.

AVT bootloader package breaks nvidia bootloader

Once the AlliedVision bootloader package is installed and configured (DevKit selected), then this succeeds once. De-installing or re-configuring the bootloader fails. I must reflash the complete Ubuntu OS.

sudo dpkg-reconfigure avt-nvidia-l4t-bootloader
3668-100---1--jetson-xavier-nx-devkit-emmc-
Starting bootloader post-install procedure.
ERROR. Procedure for bl_only_payload update FAILED.
Cannot install package. Exiting...

Jetson Xavier NX 16-GB LPDDR4 with JetPack 4.5.1

Hi,

Do you support the new Jetson Xavier NX module with 16GB LPDDR4 in JetPack 4.5.1, please ?

Thanks and best regards,
Pascal.

tag:l4t-32.4.4-1.2.0 isn't the JetPack 4.4.1 version

When I read the setup.sh file. I found the JetPack source version is 4.2.
such as:
#==============================================================================

download urls

#==============================================================================
DOWNLOAD_URL_DRIVER_PACKAGE=""
DOWNLOAD_URL_DRIVER_PACKAGE_TX2="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/t186ref_release_aarch64/Tegra186_Linux_R32.4.2_aarch64.tbz2"
DOWNLOAD_URL_DRIVER_PACKAGE_NANO="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/t210ref_release_aarch64/Tegra210_Linux_R32.4.2_aarch64.tbz2"
DOWNLOAD_URL_ROOTFS=""
DOWNLOAD_URL_ROOTFS_TX2="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/t186ref_release_aarch64/Tegra_Linux_Sample-Root-Filesystem_R32.4.2_aarch64.tbz2"
DOWNLOAD_URL_ROOTFS_NANO="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/t210ref_release_aarch64/Tegra_Linux_Sample-Root-Filesystem_R32.4.2_aarch64.tbz2"
DOWNLOAD_URL_PUBLICSOURCES=""
DOWNLOAD_URL_PUBLICSOURCES_TX2="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/Sources/T186/public_sources.tbz2"
DOWNLOAD_URL_PUBLICSOURCES_NANO="https://developer.nvidia.com/embedded/L4T/r32_Release_v4.2/Sources/T210/public_sources.tbz2"
DOWNLOAD_URL_GCC="https://developer.nvidia.com/embedded/dlc/l4t-gcc-7-3-1-toolchain-64-bit"

all sources url is the 4.2, but you tag is l4t-32.4.4.1.20 and recommand version is jetpack 4.4.1 version.

Kernel installation option for 4 CSI-lines camera on Jetson Nano

Hi,

We bought an ALVIUM 1800 C - 2050 for our Jetson Nano. Our requirement was to be able to use the 4 CSI-Lines of the camera module. (not only 2)
So Alliedvision seller tell us to buy a JN30 carrier board from Auvidea for jetson Nano which has a 4 CSI-lines port populated. (Standard Jetson carrier board A02 has only a 2 CSI-lines port and carrier board B01 has two 2 CSI-lines ports)

In the kernel install script, there are 2 options, A02 board and B01 board.
Which option should I use to be complient with the JN30 carrier board and the 4-lines CSI port ?

Thanks

PLMR

dmesg | grep avt is not working and ls /dev/video* not found

from the below thread:
#13 (comment)

i am using Method C : Cross-compile binaries from source

on my machine ls /dev/video* not working so i tried dmesg | grep avt

and i dont get any output
and output is like this

i dont know how to proceed futher. kindly help me

@AVTechie
@BernardoLuck

precompiled binaries

Hi,
with reference to https://github.com/alliedvision/linux_nvidia_jetson, I used method B, I installed driver (AlliedVision_NVidia_nano_L4T_32.5.1_4.9.201.tar.gz), and rebooted Jetson (4GB version), but there is no detection of the Camera (Alvium 1800 C-319c color bareboard): no /dev/video* file found.

Some info:

dmesg|grep avt ---> no response
apt show nvidia-jetpack -a
Package: nvidia-jetpack
Version: 4.5.1-b17
Priority: standard
Section: metapackages
Maintainer: NVIDIA Corporation
Installed-Size: 199 kB
Depends: nvidia-cuda (= 4.5.1-b17), nvidia-opencv (= 4.5.1-b17), nvidia-cudnn8 (= 4.5.1-b17), nvidia-tensorrt (= 4.5.1-b17), nvidia-visionworks (= 4.5.1-b17), nvidia-container (= 4.5.1-b17), nvidia-vpi (= 4.5.1-b17), nvidia-l4t-jetson-multimedia-api (>> 32.5-0), nvidia-l4t-jetson-multimedia-api (<< 32.6-0)
Homepage: http://developer.nvidia.com/jetson
Download-Size: 29,4 kB
APT-Sources: https://repo.download.nvidia.com/jetson/t210 r32.5/main arm64 Packages
Description: NVIDIA Jetpack Meta Package

Package: nvidia-jetpack
Version: 4.5-b129
Priority: standard
Section: metapackages
Maintainer: NVIDIA Corporation
Installed-Size: 199 kB
Depends: nvidia-cuda (= 4.5-b129), nvidia-opencv (= 4.5-b129), nvidia-cudnn8 (= 4.5-b129), nvidia-tensorrt (= 4.5-b129), nvidia-visionworks (= 4.5-b129), nvidia-container (= 4.5-b129), nvidia-vpi (= 4.5-b129), nvidia-l4t-jetson-multimedia-api (>> 32.5-0), nvidia-l4t-jetson-multimedia-api (<< 32.6-0)
Homepage: http://developer.nvidia.com/jetson
Download-Size: 29,4 kB
APT-Sources: https://repo.download.nvidia.com/jetson/t210 r32.5/main arm64 Packages
Description: NVIDIA Jetpack Meta Package

I tried also "method A: Use precompiled binaries" (first AlliedVision_NVidia_nano_L4T_32.5.1_4.9.201-g50008ff.tar.gz, and then AlliedVision_NVidia_nano_L4T_32.5.1_4.9.201-g180da76c98e2.tar.gz) but I obtained the same results.

Thank you

Jetpack 4.6 support?

Jetpack 4.6 is released, is there any ETA on supporting it?

It introduces tons of features that make downgrading to 4.5.1 not feasible.

Precompiled kernel not working

Recently I got the Alvium Camera kit of the link below
https://www.alliedvision.com/en/products/alvium-camera-kit.html
I am trying to connect to an nvidia jetson nano

I've been trying to make it work using the precomiled kernel in
https://www.alliedvision.com/en/products/software/embedded-software-and-drivers.html

No matter what i try, is not possible to find a video device /dev/video0 is not created. Is there any detailed instructions for installation I am not shure what i am doing wrong.

Also, I found an sd image available for jetson nano but the link is broken

JetPack 4.5.1

Hello, I need to use a newer JetPack in order to use deepstream-5.1

How can I build the driver for this version?

thanks

Precompiled binary won't install on Jetson Xavier NX

The installer runs fine without warnings, but the module doesn't get installed. Nothing ALVIUM related on dmesg.

AUVIDEA JNX30-LC compatibility

Hello,

I've two question:

is the Alvium Jetson driver is compatible with the AUVIDEA JNX30-LC board (this card is a Low Cost version of the JNX30-PD board that is listed within the driver compatibility)
Is the AUVIDEA JNX30-PD / the AGX ORIN Developer Kit can be used with AVT ALVIUM cameras without the AVT camera adapter board ?

Thanks a lot.

Possible to use gstreamer with external trigger?

Hi, I was wondering if it is possible to use gstreamer with a v4l2src but with an external hardware trigger configured? I was hoping I could set the trigger registers through v4l2-ctl but they don't appear in the v4l2-ctl controls available. Thanks!

Difference between build.py and build.sh

Could you please document the difference between those two targets? Why are there two variants? Using the bash scripts causes several failures.
Thanks!

How to build module with DKMS?

Hello!
I'm trying to build a module for the BME280 using DKMS and got the following error:

ERROR (dkms apport): binary package for bme280: 1.0 not found

A build log provides the following details:

make -C /lib/modules/4.9.201-g180da76c98e2/build M=/var/lib/dkms/bme280/1.0/build modules
make[1]: *** /lib/modules/4.9.201-g180da76c98e2/build: No such file or directory. Stop.
Makefile:13: recipe for target 'default' failed
make: *** [default] Error 2

/lib/modules/4.9.201-g180da76c98e2/build - is a symlink to /home/flo/linux_nvidia_jetson/kernel/kernel-4.9 and this resource is available on the one PC in the world :)

Is there a way to build modules for your kernel with DKMS? Thanks.

Env.: kernel - 4.9.201-g180da76c98e2, arch - aarch64

Does this kernel see the qspi_mtd /dev/mtdblockX ?

Hello,

I have a fork of this kernel which I am using on the AntMicro Nano baseboard. I have a particular hardware issue and I am hoping others working with this kernel (with the base Nano dev board?) might be able to confirm a particular functionality..

With the "default" 32.5.1 kernel installed by the SDK manager, Linux is able to initialize the qspi NOR flash, and it appears as /dev/mtdblock0

[    1.627226] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000
[    1.627235] qspi_mtd spi6.0: s25fs256s (32768 Kbytes)
[    1.627245] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0
[    1.627462] 1 ofpart partitions found on MTD device spi6.0
[    1.627467] Creating 1 MTD partitions on "spi6.0":
[    1.627491] 0x000000000000-0x000002000000 : "Whole_flash0"

In my fork, as well as kernels built with the l4t-32.5.1 branch of this repo, the QSPI isn't initialized when running on my board:

[    2.751404] qspi_mtd spi6.0: unrecognized JEDEC id 000000

So the different could be in my hardware, although it works with the stock 32.5.1 kernel; or in my DTB?

I'm hoping someone can confirm that this kernel does see the qspi flash on their board (e.g. the Nano dev board)

question deleted

comment deleted

Build on Jetson Nano failed.

We bought the Jetson Nano recently, installed the recent Nvidia Image on a fresh SD-card and try to install the allied-vision suite on the device. After executing the following line an error is produced as follows

`
~/Downloads/linux_nvidia_jetson-master$ ./build.sh work_dir nano all all

[i]...Running script for building Linux4Tegra setup...
[d]...dedicated for L4T: R32.2.1 and Jetson ...
[i]...Export variables for compiling...
[d]...ARCH=arm64...
[d]...CROSS_COMPILE=/home/bene/Downloads/linux_nvidia_jetson-master/work_dir/gcc/gcc-7.3.1-aarch64/bin/aarch64-linux-gnu-...
[d]...INSTALL_MOD_PATH=/home/bene/Downloads/linux_nvidia_jetson-master/work_dir/Linux_for_Tegra/rootfs...
[i]...Clean kernel sources...
sudo: time: command not found
[d]...Could not clean kernel sources...
Failed...
[i]...Script execution...
Failed...
`

Is there any way to debug this? We used the explanation given in this repository.

Thank you very much for your help!

avt_camera not detect + other issues on Ant Micro carrier

Hi Allied Vision

I have two 1800 158C MIPI-CSI_2 cameras for a stereo-camera application.
I'm using a Jetson Nano and an Ant Micro open source Jetson baseboard derivative with the adapter flex cable integrated into the board. There are two 22 pin MIPI-CSI connectors to fit the cameras straight onto the board. I have followed the instructions outlined by Ant Micro and Allied Vision Github to install the drivers on Jetpack 4.4.1 however I have a few issues I can't resolve.

From the kernel logs I have this output:
Starting kernel ...

[ 0.601800] i2c i2c-6: of_i2c: modalias failure on /host1x/i2c@546c0000/avt_pca9548@70
[ 1.179065] avt_csi2 0-003c: No camera detected
[ 1.184066] avt_csi2 6-003c: No camera detected
[ 11.127224] tegra-i2c 7000c700.i2c: rx dma timeout txlen:28 rxlen:128
[ 11.133675] tegra-i2c 7000c700.i2c: --- register dump for debugging ----
[ 11.140391] tegra-i2c 7000c700.i2c: I2C_CNFG - 0x22c00
[ 11.145529] tegra-i2c 7000c700.i2c: I2C_PACKET_TRANSFER_STATUS - 0x10001
[ 11.152226] tegra-i2c 7000c700.i2c: I2C_FIFO_CONTROL - 0x1c
[ 11.157795] tegra-i2c 7000c700.i2c: I2C_FIFO_STATUS - 0x800040
[ 11.163624] tegra-i2c 7000c700.i2c: I2C_INT_MASK - 0x6c
[ 11.168846] tegra-i2c 7000c700.i2c: I2C_INT_STATUS - 0x2
[ 11.174180] tegra-i2c 7000c700.i2c: i2c transfer timed out addr: 0x50

And I can't find any information regarding these errors. I was hoping you could provide some insight.

Best regards

Is it possible to compile the drivers on the target machine?

I'm kind of disappointed seeing as I spent (for me at least) a decent amount of money on an AGX Xavier camera adapter, only to find out it doesn't work on the 4.6 update. And the 5.0 update isn't far off. Also my peculiar setup means I can't easily use the listed methods. My partition and file structure will not work with any automated scripts. Is there work being done to prepare for the 5.0 release? I don't mean to sound unkind (I know programming is complex) but if there won't be support for a good while I will need to get a crash course on kernel hacking and make my own. Thank you for the work being done on this repo

Deploy kernel image twice for xavier?

Hello,

In readme it seems that both step 5 and step 9 deploy kernel image into board.
Why does it done twice for xavier ? Isn't one time flashing for image good enough ?

Create a tarball with the kernel image and modules.,
5. Copy the tarball to the target board. On the target board, extract the tarball and run the included install script.
9 .Xavier users: Set Xavier to Force USB Recovery Mode and run deploy.sh again with parameter flash-kernel to flash the kernel image to the board.

Thanks

Python Byndings

Is it possible to access the frames from a python routine as it's done in picamera for the raspberry pi?

Jetpack version support

Would this work with Jetpack 3.3.1 (for Ubuntu 16.04) on a Jetson TX2?

Jetpack 5.x support

Can you please elaborate more about the Jetpack 5.x roadmap? When will it be supported by AlliedVision?

Failed to cross-compile kernel as build.sh step

After successfully running prepare.sh I run ./build.sh work_dir nx all all, but at some point I'm getting

/usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
  CHK     scripts/mod/devicetable-offsets.h
collect2: error: ld returned 1 exit status
make[2]: *** [scripts/Makefile.host:110: scripts/dtc/dtc] Error 1
make[1]: *** [scripts/Makefile.build:649: scripts/dtc] Error 2
make: *** [Makefile:593: scripts] Error 2
make: *** Waiting for unfinished jobs....

Any Ideas what is wrong?

dark Images with Jetson Nano and Jetpack 4.3

Hi,

I've just installed the drivers and tested the example codes (e.g. gstreamer_live.sh) and I get an image, but the exposure is very low. I can only see the lights in the room, everything else is dark.

For reference I have am using the 1800-158c and 1800-C-319c. Both via CSI interface. I don't get any error message either. I'm running on the Jetson Nano B01 revision and jetpack 4.3. I tried the Gstreamer and V4L scripts given by allied vision in their git repository and I keep getting the same issue

Any suggestions on how to solve this? I'm a little stuck

Attached is a picture of lights taken by the allied vision camera (319c), as you can see the exposure is too low.

Xavier NX Jetpack L4T 32.4.3, which branch should I use?

As in title, my harware is Jetson Xavier NX, Jetpack is L4T 32.4.3.
Which branch version should I use?

./deploy stage failure - jetson xavier NX developer kit

During stage 8 I'm getting to following issue:

[ 4.6720 ] tegrahost_v2 --chip 0x19 0 --blocksize 512 --magicid MEMB --addsigheader_multi /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_1.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_2.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_3.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_4.bct
[ 4.6724 ] adding BCH for /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_1.bct
[ 4.6743 ]
[ 4.6749 ] tegrahost_v2 --chip 0x19 --align mem_coldboot.bct
[ 4.6754 ]
[ 4.6760 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_coldboot.bct zerosbk
[ 4.6765 ] Header already present for mem_coldboot.bct
[ 4.6767 ]
[ 4.6774 ] tegrasign_v2 --key None --list mem_coldboot_sigheader.bct_list.xml
[ 4.6779 ] Assuming zero filled SBK key
[ 4.6782 ]
[ 4.6789 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_coldboot_sigheader.bct.encrypt mem_coldboot_sigheader.bct.hash zerosbk
[ 4.6797 ]
[ 4.6798 ] Generating recovery mem-bct
[ 4.6803 ] tegrabct_v2 --chip 0x19 0 --sdram /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1.cfg --membct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_1.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_2.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_3.bct /home/baseline/Downloads/linux_nvidia_jetson/work_dir/Linux_for_Tegra/bootloader/16022/tmpfdjryT1_4.bct
[ 4.6808 ] Packing sdram param for instance[0]
[ 4.7111 ] Packing sdram param for instance[1]
[ 4.7112 ] Packing sdram param for instance[2]
[ 4.7114 ] Packing sdram param for instance[3]
[ 4.7115 ] Packing sdram param for instance[4]
[ 4.7115 ] Packing sdram param for instance[5]
[ 4.7115 ] Packing sdram param for instance[6]
[ 4.7115 ] Packing sdram param for instance[7]
[ 4.7115 ] Packing sdram param for instance[8]
[ 4.7115 ] Packing sdram param for instance[9]
[ 4.7115 ] Packing sdram param for instance[10]
[ 4.7115 ] Packing sdram param for instance[11]
[ 4.7115 ] Packing sdram param for instance[12]
[ 4.7115 ] Packing sdram param for instance[13]
[ 4.7115 ] Packing sdram param for instance[14]
[ 4.7115 ] Packing sdram param for instance[15]
[ 4.7115 ]
[ 4.7122 ] tegrahost_v2 --chip 0x19 --align mem_rcm.bct
[ 4.7128 ]
[ 4.7134 ] tegrahost_v2 --chip 0x19 0 --magicid MEMB --appendsigheader mem_rcm.bct zerosbk
[ 4.7139 ] adding BCH for mem_rcm.bct
[ 4.7148 ]
[ 4.7155 ] tegrasign_v2 --key None --list mem_rcm_sigheader.bct_list.xml
[ 4.7161 ] Assuming zero filled SBK key
[ 4.7162 ]
[ 4.7170 ] tegrahost_v2 --chip 0x19 0 --updatesigheader mem_rcm_sigheader.bct.encrypt mem_rcm_sigheader.bct.hash zerosbk
[ 4.7180 ]
[ 4.7181 ] Sending BCTs
[ 4.7186 ] tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt --download bct_mem mem_rcm_sigheader.bct.encrypt
[ 4.7191 ] Applet version 01.00.0000
[ 4.9404 ] Sending bct_bootrom
[ 4.9405 ] [................................................] 100%
[ 4.9416 ] Sending bct_mb1
[ 4.9466 ] [................................................] 100%
[ 4.9501 ] Sending bct_mem
[ 5.0130 ] [................................................] 100%
[ 5.1472 ]
Error: Return value 8
Command tegrarcm_v2 --download bct_bootrom br_bct_BR.bct --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt --download bct_mem mem_rcm_sigheader.bct.encrypt
Failed to flash/read t186ref.

real 0m16.107s
user 0m4.080s
sys 0m2.071s

[d]...Could not flash files to ...
Failed...

TX2 NX support

Hi,

Do you have any plan of when the TX2 NX would be supported, please?

Best regards,
Pascal.

Where can I download the Xavier kernel

I have been using the xavier kernel downloaded from https://www.alliedvision.com/en/products/software/embedded-software-and-drivers/precompiled-kernel.html - Where can I download it from now?

Device no longer recognized after reboot (on Jetson Nano)

I installed the Alvium CSI-2 driver for my ALVIUM 1500 C-050 on a Jetson Nano.
Everything works perfectly fine but if I reboot the camera is no longer recognized until I run the install script again.
I tried Method A (precompiled binaries) as well as Method B (cross-compiling binaries from source) both work until I restart.

Deploy tarball for Xavier NX target does not work

Hi again,

I'm still working with master and l4t-32.5.1. When I ran deploy.sh command to generate the tarball for Jetson Xavier NX as target, I got following error :

Generate Multi-Spec BUP Tool

Error: Invalid target board - jetson-nano-devkit.
...

Error: Invalid target board - jetson-nano-devkit-emmc.

...

Error: Invalid target board - jetson-nano-2gb-devkit.

...

Error: Invalid target board - jetson-tx1-devkit.

...
t21x payload generation complete with 10 failure(s)
^M
FAILURE: error cleaning BUP tmp files^M
FAILURE: no payload made for config "boardid=3448;fab=000;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=100;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=200;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=300;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=200;boardsku=0002;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit-emmc;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=300;boardsku=0002;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-devkit-emmc;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=3448;fab=300;boardsku=0003;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-nano-2gb-devkit;rootdev=mmcblk0p1"^M
FAILURE: no payload made for config "boardid=2180;fab=100;boardsku=;boardrev=;fuselevel_s=1;chiprev=0;board=jetson-tx1-devkit;rootdev=mmcblk0p1"^M
FAILURE: error cleaning BUP tmp files
cp: cannot stat '/devel/RTR/SW/alliedvision_linux_nvidia_jetson/avt_build/nx-workdir/Linux_for_Tegra/bootloader/payloads_t21x/bl_update_payload': No such file or directory

It seems that NX is not really taken into account in the createDeployTarball() function :

createDeployTarball()
{
rm -rf "$PATH_TARGET_DEPLOY_TMP_FOLDER"
mkdir -p "$PATH_TARGET_DEPLOY_TMP_FOLDER"

    cp "$FILE_INSTALL_SCRIPT" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
    cp "$FILE_KERNEL_IMAGE" "$PATH_TARGET_DEPLOY_TMP_FOLDER"

    if [ "$DEDICATED_BOARD" = "$DEDICATED_BOARD_XAVIER" ]
    then
            #sed -i -e '/REQ_MACHINE=/c\REQ_MACHINE="NVidia Jetson AGX Xavier"' "$PATH_TARGET_DEPLOY_TMP_FOLDER/install.sh"
            #cp "$FILE_DEVICE_TREE_BLOB_XAVIER" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            (
                    cd ${PATH_TARGET_L4T}
                    ./l4t_generate_soc_bup.sh t19x
            )
            cp ${PATH_TARGET_L4T}/bootloader/payloads_t19x/bl_update_payload "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            sed -i -e '/REQ_MACHINE=/c\REQ_MACHINE="NVidia Jetson Xavier"' "$PATH_TARGET_DEPLOY_TMP_FOLDER/install.sh"

    elif [ "$DEDICATED_BOARD" = "$DEDICATED_BOARD_TX2" ]
    then
            #cp "$FILE_DEVICE_TREE_BLOB_TX2" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            (
                    cd ${PATH_TARGET_L4T}
                    ./l4t_generate_soc_bup.sh t18x
            )
            cp ${PATH_TARGET_L4T}/bootloader/payloads_t18x/bl_update_payload "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            sed -i -e '/REQ_MACHINE=/c\REQ_MACHINE="NVidia Jetson TX2"' "$PATH_TARGET_DEPLOY_TMP_FOLDER/install.sh"

    else
            (
                    cd ${PATH_TARGET_L4T}
                    ./l4t_generate_soc_bup.sh t21x
            )
            cp ${PATH_TARGET_L4T}/bootloader/payloads_t21x/bl_update_payload "$PATH_TARGET_DEPLOY_TMP_FOLDER"

            #sed -i -e '/REQ_MACHINE=/c\REQ_MACHINE="NVidia Jetson Xavier"' "$PATH_TARGET_DEPLOY_TMP_FOLDER/install.sh"
            #cp "$FILE_DEVICE_TREE_BLOB_NANO_DEVKIT" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            #cp "$FILE_DEVICE_TREE_BLOB_NANO_PRODUCTION" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            #cp "$FILE_DEVICE_TREE_BLOB_NANO_2GB" "$PATH_TARGET_DEPLOY_TMP_FOLDER"
            sed -i -e '/REQ_MACHINE=/c\REQ_MACHINE="NVidia Jetson Nano"' "$PATH_TARGET_DEPLOY_TMP_FOLDER/install.sh"
    fi



    if ! (cd "${PATH_TARGET_L4T}/rootfs"; tar -zcvf "${PATH_TARGET_DEPLOY_TMP_FOLDER}/${FILE_DEPLOY_MODULES}" "${RELATIVE_PATH_KERNEL_MODULES}")
    then
            log error "Could not find modules folder! ${PATH_TARGET_DEPLOY_TMP_FOLDER}/${FILE_DEPLOY_MODULES} ${RELATIVE_PATH_KERNEL_MODULES}"
            SUCCESS_FLAG=$FALSE
    else
            if (cd "$PATH_TARGET_DEPLOY" && tar -zcvf "${FNAME}${KR}".tar.gz $(basename "${PATH_TARGET_DEPLOY_TMP_FOLDER}"))
            then
                    log debug "Deploy tarball has been created: ${PATH_TARGET_DEPLOY}/${FNAME}${KR}.tar.gz"
                    SUCCESS_FLAG=$TRUE
            else
                    log error "Could not create tarball with kernel image and device tree files"
                    SUCCESS_FLAG=$FALSE
            fi
    fi

}

It looks like targets other than Xavier and TX2 would be considered as Nano/TX1 (t21x). Do you confirm?

Thanks and best regards,
Pascal.

deploy.log

Cross-compile fails in latest step

I tried to build the master code and the l4t-34.1.1-5.0.1-beta-1 code. Both variants fail in a freshly setup Ubuntu 18.04 virtual machine.

t19x payload generation complete with 18 failure(s)

SUCCESS: cleaned up BUP tmp files prior to payload creation
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=D.0;fuselevel_s=1;chiprev=2;board=jetson-agx-xavier-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=E.0;fuselevel_s=1;chiprev=2;board=jetson-agx-xavier-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0004;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-agx-xavier-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=402;boardsku=0005;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-agx-xavier-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=D.0;fuselevel_s=1;chiprev=2;board=jetson-xavier-maxn;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=E.0;fuselevel_s=1;chiprev=2;board=jetson-xavier-maxn;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0004;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-maxn;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=402;boardsku=0005;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-maxn;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=D.0;fuselevel_s=1;chiprev=2;board=jetson-xavier-slvs-ec;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0001;boardrev=E.0;fuselevel_s=1;chiprev=2;board=jetson-xavier-slvs-ec;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0004;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-slvs-ec;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=402;boardsku=0005;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-slvs-ec;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=3668;fab=100;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-nx-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=3668;fab=301;boardsku=0000;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-nx-devkit;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=3668;fab=100;boardsku=0001;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-nx-devkit-emmc;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=3668;fab=301;boardsku=0001;boardrev=;fuselevel_s=1;chiprev=2;board=jetson-xavier-nx-devkit-emmc;rootdev=mmcblk0p1"
FAILURE: no payload made for config "boardid=2888;fab=400;boardsku=0004;boardrev=;fuselevel_s=1;chiprev=2;board=clara-agx-xavier-devkit;rootdev=mmcblk0p1"

stderr:
Board ID(2888) FAB(400) sku(0001) revision(D.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
Board ID(2888) FAB(400) sku(0001) revision(D.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(E.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0004) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(402) sku(0005) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(D.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(E.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0004) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(402) sku(0005) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(D.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(E.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0004) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(402) sku(0005) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0004) revision()
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(600) sku(0008) revision()
1+0 records in
1+0 records out
4096 bytes (4,1 kB, 4,0 KiB) copied, 0,000107894 s, 38,0 MB/s
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
/home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/l4t_bup_gen.func: /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/bootloader/rollback/rollback_parser.py: /usr/bin/python: bad interpreter: No such file or directory
Board ID(2888) FAB(400) sku(0001) revision(D.0)
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can't read /home/foo/projetcs/linux_nvidia_jetson/avt_build/work/xavier/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory

Traceback (most recent call last):
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/tools.py", line 81, in execute
    raise RuntimeError(f'Subprocess returned error {sub.returncode}')
RuntimeError: Subprocess returned error 1

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "./build.py", line 5, in <module>
    main()
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/build.py", line 138, in main
    deploy.deploy(args, brd)
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/deploy.py", line 297, in deploy
    build_bups(args, board)
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/deploy.py", line 250, in build_bups
    t.execute(['sudo', './l4t_generate_soc_bup.sh', bup], cwd=board.build_dir / "Linux_for_Tegra")
  File "/home/foo/projetcs/linux_nvidia_jetson/avt_build/jetson_build/tools.py", line 84, in execute
    raise RuntimeError(f'Error {str(err)} executing `{" ".join(str(x) for x in args)}`') from err
RuntimeError: Error Subprocess returned error 1 executing `sudo ./l4t_generate_soc_bup.sh t19x`

alliedvision / linux_nvidia_jetson Goto Github PK

linux_nvidia_jetson's People

Contributors

Stargazers

Watchers

Forkers

linux_nvidia_jetson's Issues

download urls

Recommend Projects

Recommend Topics

Recommend Org