aloksinha2001/picuntu-3.0.8-alok

Integrated kernel for Picuntu 3.0.8-alok+

picuntu-3.0.8-alok

rk3066-kernel - derived from mix of andrew source, omegamoon, 0.3a kernel, driver sources

Integrated kernel for Picuntu 3.0.8-alok+

Linux/Android kernel for the Rockchip RK3066 SoC

Changelog - Kernel - 3.0.8-alok+

• Cleaned the previous kernel
• Removed unwanted TV Tuner cards
• Bluetooth support retained
• All cpufreq governors now available - Try userspace, and hav fun.. (Read warning below)
• Default governor Ondemand
• Added Serial modules - FTD-SIO, pl2303, Garmin - for serial devices,
• Added Phone modems - For connecting Data card dongles
• Added UVC Camera support - Many users have been asking for this
• Added oprofiler support
• Added iptables
• Added NAT/Firewall (inc GRE) support - Now you can make your PicUntu a complete firewall
• Added USB 1.0 support - remember how your old USB hubs were not being used for bootup, well they should work now.
• DW_OTG_ debug report suppressed
• Added USB SCSI adapter - I have lots of SCSI harddisk lying around, and USB adapter for them, but they seemed not to work earlier.
• Added Pegasus network support
• FB set - all options enabled - you should have better control for fb setting.
• Added auxilary Video - If you have a USB LED,LCD screen lying around - try connecting to PIcUntu, should work. (in addition to HDMI) - required for in-car applications.
• Modules for USB Printer - now you should be able to connect USB printers to PicUntu
• Serial Modem drivers - Qualcom, NAVMAN,
• Added Joliet/UDF support - You should be able to connect USB CDROM
• NFS Client, NFS Server support for V3 , V4 added
• Ofcourse CIFS continues
• Integrated BCM40181, rtl8188eu support - so that you no longer need to separately look for modules for basic wifi
• Three graphic driver kernels - 1080p, 720, VGA are released.
• No it does not yet have support for MX1 wifi, RK802III/s - wifi - I am still hunting for the source. - A Kirby from Rikomagic was successful in getting us the source code for MT. (wifi + BT) trying to get that integrated now.

=======

Apr 18th, 2013 Merged into aloksinha's kernel the following ones:

• Omegamoon, with several CPU and I/O governors (https://github.com/omegamoon/rockchip-rk30xx-mk808)
• olegk0, with Mali HW 3D (https://github.com/olegk0/rk3066-kernel) and specially the more up to date Jelly Bean RK3066 kernel from https://github.com/kelvinchengxiwu/rk\_kernel (look for rknand_base_ko.c, picuntu version is 4.34 from Apr2012, whereas here it is 4.40 from Aug2012), mostly anywhere you look at in this kernel you can spot bugfixes and enhancements. Also added webcam used by Measy U2C, Kimdecent B12, and NX003II sticks.
• WARNING: The .config disables many wireless drivers, re-enable them as modules or in-kernel. Also, my memory is DDR3 1333 (667 MHz), change that in the .config.
• The board-rk30-box.c has been updated with max GPU speed 400 MHz (instead of 266), and max CPU frequency 1608 MHz (instead of 1200), both values allowed by Rockchip (and Measy U2C stick).
• The kernel has not been tested for compile yet

==========

picuntu-3.0.8-alok's Issues

SMSC 8720A Support

On my MK809iii knockoff there is a LAN 10/100 port that is connected to a SMSC8720A Ethernet chip. I have not been able to find an available source, but I have contacted the mfg to see if one is available.

This issue was opened to track that progress.

RK903 (BCM40183) wifi and bluetooth support

I would like to know if you have noticed this thread about a temporary patch to make this wifi chip work.

http://www.freaktab.com/showthread.php?6454-Temporary-RK903-Wifi-Patch-for-MK808B

Ethernet usb adapter driver

trying to boot an old device !

Hello !
Thanks for this nice work. I am trying, mostly for fun, to boot linux on an older device mk808b clone.
Unfortunately I only get to see 2 penguins and then a quick reboot to the main android image, no matter which config I try, hotdog, andrewdb or yours...
Are you able to provide a hint on what to change on .config for this kernel to boot there?
thank you, have a good day!

MT5931 Wifi and MT6622 Bluetooth support

Thanks for adding the Rikomagic Mediatek code.
From my side, I've found more Linux-like drivers in this repo:
git://github.com/Anderxale/7300-kern.git

Take a look at folder:
7300-kern/common/drivers/amlogic/wifi/mtk_5931/

UPDATE: The repo has been deleted!! I cloned it a couple weeks ago. I'll reupload the mtk folder to a repo of my own

ZD1211b wifi

Hi! trying to get my zd1211b wifi running. Do i need to add firmware? the zd1211rw driver should be in the kernel right?

Rebuilding MK808 kernel

Hey,

I'm tearing my hair out trying to rebuild the kernel for MK808 stick. The original 'ug802recovkernel.img' you supplied back in the early Picuntu days works fine, but I can't manage to build my own working kernel, regardless of which sources or toolchain I use. At the moment I'm pinning on commit dd6c934 from this repository, and using the armhf compiler chain that ships with Ubuntu 14.04, which I'm assuming should be fine.

Unpacking and repacking your original kernel works fine, so it's not my version of mkkrnlimg. I've found the original kernel tarball hosted on googlecode.com, but I can't download it -- I assumed that the early history in this repository would be close it. Any clues, pointers, hints, etc. would be very grateful!

Thanks,
Steve

watchdog code?

I've built this tree for a minix neo x5 mini, but it constantly reboots, I suspect it's missing synopsys designware watchdog support? Any ideas? Or know of a "better" kernel to try? I've got 3.17 near-vanilla booting, but it doesn't seem to detect the sd card, and all the 3.0.8 trees I've tried either don't boot, or constantly reboot.