bling / dotvim Goto Github PK
View Code? Open in Web Editor NEWlean & mean vim distribution
lean & mean vim distribution
hey,
I just wanted to bring this issue to attention that having git in wildignore breaks fugitive so maybe for people who use it a lot can consider removing it
tpope/vim-fugitive#121
Per https://github.com/Shougo/neocomplete.vim
Note: This plugin is not compatible with above Vim 8.2.1066! https://github.com/vim/vim/commit
/bd84617d1a6766efd59c94aabebb044bef805b99
Is there any plan to move to Dein? Are you good to merge pull request to migrate to dein?
Shougo has stopped active development of NeoBundle. Instead, the replacement is dein.vim.
I have not found such plugins as vim-yankitute or ExtractMatches in your dotfiles, so I wonder how you will, let say, yank to clipboard words in brackets and make them comma-separated
- 'autoindent' is set by default
- 'autoread' is set by default
- 'backspace' defaults to "indent,eol,start"
- 'backupdir' defaults to .,~/.local/share/nvim/backup (|xdg|)
- 'complete' doesn't include "i"
- 'directory' defaults to ~/.local/share/nvim/swap// (|xdg|), auto-created
Output must be autoindent, autoread, ....
The default SneakPrevious key is ,
and \
Currently, ,
not work, \
is remaped by CtrlP .
I add nmap , <Plug>SneakPrevious
seems work, but I don't know if this will make any bad influence, and what's the more elegant way to tackle it?
Hello, I have an error after run "cd .vim; make install", just after download all neobundle packages (On OSX Yosemite 10.10.5, xcode Version 6.4 (6E35b) ):
vim -u bundles.vim +NeoBundleClean +NeoBundleCheck +NeoBundleDocs
Vim: Caught deadly signal SEGV
Vim: Finished.
make: *** [cleanup] Segmentation fault: 11
Any idea?
Thanks.
I would like to findout how to trigger autocomplete using tab or any other key. If i scroll up down the file autocomplete is interrupting and blocking the view, it is extremely annoying to get out of autocomplete and keep browsing the file. Thanks in advance.
Kind Regards,
Sandeep
Hey. First, love the dotvim.
I looked through .vim/vimrc
for what is overriding s
. When I press s
in command mode i get '>' appearing for fast search, but I want delete + go into insert mode (standard use).
I see that, when i execute :nmap
that <Plug>Sneak_s
has commandeered s
from me but I cannot seem to disable that plugin. I have tried the following
let g:dotvim_settings.disabled_plugins=['Sneak_s']
let g:dotvim_settings.plugin_groups_exclude = ['Sneak_s']
let g:dotvim_settings.disabled_plugins=['sneak']
let g:dotvim_settings.plugin_groups_exclude = ['sneak']
My question is there a way to restore default s
behavior or what plugin should I disable and how to restore s
behavior? Thanks
from https://github.com/Shougo/unite.vim
Note: Active development on unite.vim has stopped. The only future changes will be bug fixes.
Please see Denite.nvim.
Hey bling, great vimrc. It's very well organized, I learned a lot. I have a couple of questions.
NeoBundle 'kien/ctrlp.vim', { 'depends': 'tacahiroy/ctrlp-funky' }
. My understanding of depends
is that if plugin1 is dependent upon plugin2, i.e. if plugin1 is required for plugin2 to work, it should be specified as NeoBundle 'plugin1', { 'depends': 'plugin2' }
. Is my understanding correct?NeoBundleDepends 'kana/vim-textobj-user'
and on line #624 NeoBundle 'kana/vim-textobj-indent'
. Why not simply write them as NeoBundle 'kana/vim-textobj-indent', { 'depends': 'kana/vim-textobj-user' }
. Is there any advantage in writing it the way you have?vim-plug runs much faster than NeoBundle—would you ever migrate to that? (I don't know whether it's missing anything NB has that dotvim needs.)
Hi,I'm using this vimrc on windows,and I got some problems, would you please help me?
I'm a noob and I altered the vimrc, so these errors are likely to be result from my wrong modification.
Medicated vimrc is here: https://gist.github.com/bebound/5845032
1 If using lines=999 columns=999 ,the start position is incorrect, is X 129, Y 6,and winpos can't change it.
2 Start buffer path incorrect,too many""(Original vimrc is correct,maybe I change it incorrectly),I want to know which plugin change the start buffer.
3 If I try to open a file in start buffer,I will got this error:"Error detected while processing function 101_open_buffers: Line 17; E472 Command failed"
4 While using anything in unite.vim,it will show an error:"Error detected while processing gfuncion
neobundle#autoload#command..neobundle#source..neobundle#call_hook>>24:line 4: E117:Unknow function :unite#custom#source"
5 The color of the char "tab" is too dark,I don't know which option can make this effect.
I use you config to start emacs, got an error:
[INIT ERROR] /Users/tomyli/.emacs.d/config/config-misc.el (error Package ‘etags-select-’ is unavailable)
I found etags-select not in the melpa repo, What should i do ?
setting the cache dir for vimshell creates symlink to home folder at every place I use it,
had to disable that to make it work properly
Cloned dotemacs directory into ~/.emacs.d
Received error below. Running Emacs 24.3 on Xbunutu 14.04.
Debugger entered--Lisp error: (wrong-number-of-arguments quote 10)
(quote special-mode eshell-mode comint-mode project-explorer-mode git-commit-mode diff-mode custom-mode dired-mode calendar-mode help-mode)
eval((quote special-mode eshell-mode comint-mode project-explorer-mode git-commit-mode diff-mode custom-mode dired-mode calendar-mode help-mode))
custom-initialize-reset(dotemacs-evil-emacs-state-modes (quote special-mode eshell-mode comint-mode project-explorer-mode git-commit-mode diff-mode custom-mode dired-mode calendar-mode help-mode))
custom-declare-variable(dotemacs-evil-emacs-state-modes (quote special-mode eshell-mode comint-mode project-explorer-mode git-commit-mode diff-mode custom-mode dired-mode calendar-mode help-mode) "List of modes where Evil should start up in Emacs state." :type (repeat (symbol)) :group dotemacs)
eval-buffer(#<buffer load-550218> nil "/home/lmauldin/.emacs.d/config/init-evil.el" nil t) ; Reading at buffer position 1219
load-with-code-conversion("/home/lmauldin/.emacs.d/config/init-evil.el" "/home/lmauldin/.emacs.d/config/init-evil.el" nil t)
require(init-evil)
(while --dolist-tail-- (setq module (car --dolist-tail--)) (require module) (setq --dolist-tail-- (cdr --dolist-tail--)))
(let ((--dolist-tail-- dotemacs-modules) module) (while --dolist-tail-- (setq module (car --dolist-tail--)) (require module) (setq --dolist-tail-- (cdr --dolist-tail--))))
(progn (let ((--dolist-tail-- dotemacs-modules) module) (while --dolist-tail-- (setq module (car --dolist-tail--)) (require module) (setq --dolist-tail-- (cdr --dolist-tail--)))))
eval-buffer(#<buffer load> nil "/home/lmauldin/.emacs.d/init.el" nil t) ; Reading at buffer position 1284
load-with-code-conversion("/home/lmauldin/.emacs.d/init.el" "/home/lmauldin/.emacs.d/init.el" t t)
load("/home/lmauldin/.emacs.d/init" t t)
#[0 "�\205\262� \306=\203��\307�\310Q\202;� \311=\204��\307�\312Q\202;�\313\307\314\315#\203*�\316\202;�\313\307\314\317#\203:�\320\nB�\321\202;�\316\322�\323�\322\211#\210�\322=\203a�\324\325\326\307�\327Q!"\323�\322\211#\210�\322=\203���\210�\203\243�\330�!\331\232\203\243�\332�!\211\333P\334�!\203}�\211\202\210�\334�!\203\207��\202\210�\314\262��\203\241�\335��\"\203\237�\336\337��#\210\340\341!\210��\266�\f?\205\260�\314�\323\342\322\211#)\262�\207" [init-file-user system-type delayed-warnings-list user-init-file inhibit-default-init inhibit-startup-screen ms-dos "~" "/_emacs" windows-nt "/.emacs" directory-files nil "^\\.emacs\\(\\.elc?\\)?$" "~/.emacs" "^_emacs\\(\\.elc?\\)?$" (initialization "
_emacs' init file is deprecated, please use `.emacs'") "~/_emacs" t load expand-file-name "init" file-name-as-directory "/.emacs.d" file-name-extension "elc" file-name-sans-extension ".el" file-exists-p file-newer-than-file-p message "Warning: %s is newer than %s" sit-for 1 "default"] 7 "\n\n(fn)"]()
command-line()
normal-top-level()
is there any workaround for this from within vim?
when i press C-h, instead of going left one charachter, my terminal actually send C-h which deletes one character
I love the look and feel of the interface, but am having a hard time finding a good tree/tab workflow. Could you point me towards a guide, doc, list of mappings, etc to help me out? I want to do something like this:
How do you handle this type of workflow? Thanks!
the syntax highlighting and themes don't work in iterm 2
Hey
Whenever I try to do a so $MYVIMRC it just breaks the color scheme and also for some reason it thinks that the buffer has changed even though it hasn't
I have wrapped all the autocommands in augroups with au! .
Also I have tried disabling all the plugins the problem still remains
Can't use ; to go to the next match.
After use sab to search for ab, click ";", nothing happened. I can't find problem in vimrc, do you have any idea about this problem? Thank you.
This is something that I've always wanted and I see you've implemented it!
just download this distribution, i need to dig it deeper, how to disable netrw plugin, load nerdtree by default ?
thanks !
Recently I found some unite.vim plugins' hotkey are broken, and it is because of a deprecated config option (see Shougo/neobundle.vim#499 for detail)
The following patch might help.
0001-unite_sources-is-deprecated.txt
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.