hdl_graph_slam is an open source ROS package for real-time 6DOF SLAM using a 3D LIDAR. It is based on 3D Graph SLAM with NDT scan matching-based odometry estimation and loop detection. It also supports several graph constraints, such as GPS, IMU acceleration (gravity vector), IMU orientation (magnetic sensor), and floor plane (detected in a point cloud). We have tested this package with Velodyne (HDL32e, VLP16) and RoboSense (16 channels) sensors in indoor and outdoor environments.
hdl_graph_slam consists of four nodelets.
- prefiltering_nodelet
- scan_matching_odometry_nodelet
- floor_detection_nodelet
- hdl_graph_slam_nodelet
The input point cloud is first downsampled by prefiltering_nodelet, and then passed to the next nodelets. While scan_matching_odometry_nodelet estimates the sensor pose by iteratively applying a scan matching between consecutive frames (i.e., odometry estimation), floor_detection_nodelet detects floor planes by RANSAC. The estimated odometry and the detected floor planes are sent to hdl_graph_slam. To compensate the accumulated error of the scan matching, it performs loop detection and optimizes a pose graph which takes various constraints into account.
You can enable/disable each constraint by changing params in the launch file, and you can also change the weight (*_stddev) and the robust kernel (*_robust_kernel) of each constraint.
-
Odometry
-
Loop closure
-
GPS
- /gps/geopoint (geographic_msgs/GeoPointStamped)
- /gps/navsat (sensor_msgs/NavSatFix)
- /gpsimu_driver/nmea_sentence (nmea_msgs/Sentence)
hdl_graph_slam supports several GPS message types. All the supported types contain (latitude, longitude, and altitude). hdl_graph_slam converts them into the UTM coordinate, and adds them into the graph as 3D position constraints. If altitude is set to NaN, the GPS data is treated as a 2D constrait. GeoPoint is the most basic one, which consists of only (lat, lon, alt). Although NavSatFix provides many information, we use only (lat, lon, alt) and ignore all other data. If you're using HDL32e, you can directly connect hdl_graph_slam and velodyne_driver via /gpsimu_driver/nmea_sentence.
- IMU acceleration (gravity vector)
- /gpsimu_driver/imu_data (sensor_msgs/Imu)
This constraint rotates each pose node so that the acceleration vector associated with the node will be vertical (as the gravity vector). This is useful to compensate the accumulated tilt rotation error of the scan matching. Since we ignore acceleration by sensor motion, you should not give a big weight for this constraint.
-
IMU orientation (magnetic sensor)
- /gpsimu_driver/imu_data (sensor_msgs/Imu)
If your IMU has a reliable magnetic orientation sensor, you can add orientation data to the graph as 3D rotation constraints. Note that, magnetic orientation sensors can be affected by external magnetic disturbances. In such cases, this constraint should be disabled.
-
Floor plane
- /floor_detection/floor_coeffs (hdl_graph_slam/FloorCoeffs)
This constraint optimizes the graph so that the floor planes (detected by RANSAC) of the pose nodes will be the same. This is designed to compensate the accumulated rotation error of the scan matching in large flat indoor environments.
All the configurable parameters are listed in launch/hdl_graph_slam.launch as ros params.
- /hdl_graph_slam/dump (hdl_graph_slam/DumpGraph)
- save all the data (point clouds, floor coeffs, odoms, and pose graph) to a directory.
- /hdl_graph_slam/save_map (hdl_graph_slam/SaveMap)
- save the generated map as a PCD file.
hdl_graph_slam requires the following libraries:
- OpenMP
- PCL 1.7
- g2o
- suitesparse
The following ROS packages are required:
- geodesy
- nmea_msgs
- pcl_ros
- ndt_omp
# for indigo
sudo apt-get install ros-indigo-geodesy ros-indigo-pcl_ros ros-indigo-nmea-msgs
# for kinetic
sudo apt-get install ros-kinetic-geodesy ros-kinetic-pcl_ros ros-kinetic-nmea-msgs ros-kinetic-libg2o
# for melodic
sudo apt-get install ros-melodic-geodesy ros-melodic-pcl-ros ros-melodic-nmea-msgs ros-melodic-libg2o
cd catkin_ws/src
git clone https://github.com/koide3/ndt_omp.gitNote that, in case use are using ros indigo, hdl_graph_slam cannot be built with the ros g2o binaries (ros-indigo-libg2o). Install the latest g2o:
The latest g2o causes segfault. Use commit a48ff8c42136f18fbe215b02bfeca48fa0c67507 instead of the latest one:
sudo apt-get install libsuitesparse-dev
git clone https://github.com/RainerKuemmerle/g2o.git
cd g2o
git checkout a48ff8c42136f18fbe215b02bfeca48fa0c67507
mkdir build && cd build
cmake .. -DCMAKE_BUILD_TYPE=RELEASE
make -j8
sudo make install[optional] bag_player.py script requires ProgressBar2.
sudo pip install ProgressBar2Bag file (recorded in a small room):
- hdl_501.bag.tar.gz (raw data, 344MB)
- hdl_501_filtered.bag.tar.gz (downsampled data, 57MB, Recommended!)
rosparam set use_sim_time true
roslaunch hdl_graph_slam hdl_graph_slam_501.launchroscd hdl_graph_slam/rviz
rviz -d hdl_graph_slam.rvizrosbag play --clock hdl_501_filtered.bagWe also provide bag_player.py which adjusts the playback speed according to the processing speed of your PC. It allows to process data as fast as possible for your PC.
rosrun hdl_graph_slam bag_player.py hdl_501_filtered.bagYou'll see a point cloud like:
You can save the generated map by:
rosservice call /hdl_graph_slam/save_map "resolution: 0.05
destination: '/full_path_directory/map.pcd'"Bag file (recorded in an outdoor environment):
- hdl_400.bag.tar.gz (raw data, about 900MB)
rosparam set use_sim_time true
roslaunch hdl_graph_slam hdl_graph_slam_400.launchroscd hdl_graph_slam/rviz
rviz -d hdl_graph_slam.rvizrosbag play --clock hdl_400.bag
Ford Campus Vision and Lidar Data Set [URL]
The following script converts the Ford Lidar Dataset to a rosbag and plays it. In this example, hdl_graph_slam utilizes the GPS data to correct the pose graph.
cd IJRR-Dataset-2
rosrun hdl_graph_slam ford2bag.py dataset-2.bag
rosrun hdl_graph_slam bag_player.py dataset-2.bag
-
Define the transformation between your sensors (LIDAR, IMU, GPS) and the base of your system using static_transform_publisher (see line #11, hdl_graph_slam.launch). All the sensor data will be transformed into the common base frame, and then passed to the SLAM algorithm.
-
Remap the point cloud topic of prefiltering_nodelet. Like:
<node pkg="nodelet" type="nodelet" name="prefiltering_nodelet" ...
<remap from="/velodyne_points" to="/rslidar_points"/>
...It has been reported that hdl_graph_slam_nodelet causes a memory error in some environments. I found that this is caused by a variable (color) in g2o::VertexPlane. Since this field is used for only visualization, we can remove it from vertex_plane.h and vertex_plane.cpp in g2o. I made a clone repository of g2o, in which I just removed it from the commit a48ff8c42136f18fbe215b02bfeca48fa0c67507 of g2o. If you face this memory error problem, try to install it instead of the original g2o repository. Do not forget to checkout hdl_graph_slam branch.
git clone https://github.com/koide3/g2o.git
cd g2o
git checkout hdl_graph_slam
mkdir build && cd build
cmake .. -DCMAKE_BUILD_TYPE=RELEASE
make -j8
sudo make installIf you still have the error, try our docker environment. You can build the docker image for hdl_graph_slam with:
roscd hdl_graph_slam
sudo docker build --tag hdl_graph_slam -f docker/kinetic/Dockerfile .
# you can also use melodic environment
# sudo docker build --tag hdl_graph_slam -f docker/melodic/Dockerfile .After building the image, you can launch hdl_graph_slam with:
sudo docker run -it --net=host --rm hdl_graph_slam bash
source /root/catkin_ws/devel/setup.bash
roslaunch hdl_graph_slam hdl_graph_slam.launch
Kenji Koide, Jun Miura, and Emanuele Menegatti, A Portable 3D LIDAR-based System for Long-term and Wide-area People Behavior Measurement, Advanced Robotic Systems, 2019 [link].
Kenji Koide, [email protected]
Active Intelligent Systems Laboratory, Toyohashi University of Technology, Japan [URL]
Robot Innovation Research Center, National Institute of Advanced Industrial Science and Technology, Japan [URL]
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent