hashfunktion/innovazammad

Bridge between Innovaphone PBX and Zammad's generic CTI integration

innovazammad

Forwards call information from an innovaphone PBX to Zammad's generic CTI API.

Overview

innovazammad polls the innovaphone PBX' SOAP API for call events and forwards those to Zammad, using its generic CTI API. It keeps track of call status and attempts to map PBX call events to their equivalents on the Zammad side, including keeping track of forwarded calls.

Installation

Released binaries can be downloaded from the releases page.

From source

To install from source, simply run:

go get github.com/regiohelden/innovazammad

For go < 1.12 this will not respect the exact versions used when doing a release. To ensure the same results as a released binary for older versions of go, do this instead:

git clone https://github.com/regiohelden/innovazammad.git
cd innovazammad
go build

Configuration

Configuration can be supplied as flags, environment variables or in a configuration file (in JSON, YAML or TOML).

The following options are available:

Flag	Description	Default	Required?
--confpath	Path to configuration file.	/etc/innovazammad.yaml
-l, --loglevel	How much logging will be output to stdout (values as supported by logrus).	warn
--graceperiod	How long to wait for ongoing calls to finish before shutting down or restarting. Restarting may leave orphaned calls on the Zammad side.	60s
--pbx.url	Under which URL should innovazammad attempt to connect to the PBX. Including protocol http or https.	none	×
--pbx.endpointpath	Path under pbx.url where the API is accessible.	/PBX0/user.soap
--pbx.user	User for authentication with the PBX. To access the API you need to use an Admin Account.	none	×
--pbx.pass	Password for authentication with the PBX.	none	×
--pbx.appname	Application name used when connecting to the PBX (informational only).	innovazammad
--pbx.monitoruser	PBX user object for which events will be monitored. Possibly a 'trunk line'.	none	×
--pbx.filterongroup	Only events for users in this group will be submitted to Zammad. If not provided, all calls will be submitted. Only filtering one group is supported.	none
--pbx.groupcachetime	Time to cache group membership information used by pbx.filterongroup. Setting this to 0 causes group membership to be checked for every incoming event.	300s
--zammad.endpointurl	URL to Zammad's 'CTI (generic)' endpoint. Can be found in Zammad's integration settings page.	none	×
--zammad.trunkprefix	Optional prefix to trim from the phone numbers received from the PBX. Normally necessary if calls come through a trunk line.	0
--zammad.countrycode	Country code to prepend to area-local phone numbers received from the PBX.	49
--zammad.numberprefix	Optional number to prepend to unqualified phone numbers received from the PBX. This should transform an internal extension into an E123 number.

The environment variable names can be created by prefixing the flag name with INNOVAZAMMAD_ and replacing any dot (.) with underscore (_). E.g.: --pbx.url becomes INNOVAZAMMAD_PBX_URL.

Compatibility

Currently innovazammad uses innovaphone's v11 and newer SOAP API (see innovaphone/pbx.wsdl). Older PBX versions might not work.

On the Zammad side, it has been tested against the 2.9, 3.0 and 3.1 branch.

Monitoring

Internal state can be monitored by querying the metrics endpoint:

curl -s localhost:8080/debug/vars