hevz/hubpower

Control the power settings for a USB hub

hubpower's Issues

Am I the idiot?

Hello - I downloaded hubpower.c and compiled with:
gcc -o hubpower hubpower.c - and it compiled ok.
Here is what I get when I use it:
wolff@wolff:/Documents/install/hubpower$ lsusb
Bus 001 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0781:5575 SanDisk Corp. Cruzer Glide
Bus 003 Device 003: ID 2357:0604 TP-Link TP-Link UB500 Adapter
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
wolff@wolff:/Documents/install/hubpower$ ./hubpower 0781:5575 power off
Usage: hubpower busnum:devnum power {portnum (on|off)} ...
hubpower busnum:devnum reset {portnum (on|off)} ...
hubpower busnum:devnum enable {portnum (on|off)} ...
hubpower busnum:devnum status
hubpower busnum:devnum bind
wolff@wolff:/Documents/install/hubpower$ ./hubpower 0781:5575 power on
Usage: hubpower busnum:devnum power {portnum (on|off)} ...
hubpower busnum:devnum reset {portnum (on|off)} ...
hubpower busnum:devnum enable {portnum (on|off)} ...
hubpower busnum:devnum status
hubpower busnum:devnum bind
wolff@wolff:/Documents/install/hubpower$ ./hubpower 0781:5575 power
Usage: hubpower busnum:devnum power {portnum (on|off)} ...
hubpower busnum:devnum reset {portnum (on|off)} ...
hubpower busnum:devnum enable {portnum (on|off)} ...
hubpower busnum:devnum status
hubpower busnum:devnum bind
wolff@wolff:~/Documents/install/hubpower$ ./hubpower 0781:5575 status
Usage: hubpower busnum:devnum power {portnum (on|off)} ...
hubpower busnum:devnum reset {portnum (on|off)} ...
hubpower busnum:devnum enable {portnum (on|off)} ...
hubpower busnum:devnum status
hubpower busnum:devnum bind

Seems to always give me the help menu

OS locks up after issuing a command

Very serious issue.

I believe I just tried a power off command and my USB ports are currently power cycling (about 0.25s on then 0.75s off). The power cycling is only on the hub which I tried to control, not the onboard USB ports (they're fine).

Additionally, when I try to issue another hubpower command, my entire OS locks up.

I'm on a Raspberry Pi with Raspian for what it's worth.

can not be compiled

19:32:59 [aboettger:~] % gcc -o hubpower hubpower.c
hubpower.c: In function ‘port_status’:
hubpower.c:85:13: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
portnum, strerror(errno));
^
hubpower.c: In function ‘main’:
hubpower.c:173:21: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
fname1, strerror(err1));
^
hubpower.c:175:21: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
fname2, strerror(errno));
^
hubpower.c:269:21: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
portnum, strerror(errno));
^

THANK YOU! :-)

it works very well!

What's the license?

Cool bit of code - would like to use some of it - what's the license?

Does this support USB3.X? If not, how hard is it to add support for this?