hoangt / thermal_daemon Goto Github PK
View Code? Open in Web Editor NEWThis project forked from intel/thermal_daemon
Thermal daemon for IA
License: GNU General Public License v2.0
This project forked from intel/thermal_daemon
Thermal daemon for IA
License: GNU General Public License v2.0
Use man pages to check command line arguments in configuration: man thermald man thermal-conf.xml Prerequisites: Kernel Prefers kernel with Intel RAPL power capping driver : Available from Linux kernel 3.13.rc1 Intel P State driver (Available in Linux kernel stable release) Intel Power clamp driver (Available in Linux kernel stable release) CONFIG_X86_MSR, so that x86 MSR can be read/write from user space to control RAPL if no RAPL powecap class driver is not present. Default If none of the above available cpufreq to control P states. Building and executing on Fedora 1. Install yum install automake yum install gcc yum install gcc-c++ yum install glib-devel yum install dbus-glib-devel yum install libxml2-devel 2 Build ./autogen.sh ./configure prefix=/usr make sudo make install 3 - start service sudo systemctl start thermald.service - Get status sudo systemctl status thermald.service - Stop service sudo systemctl stop thermald.service 4. Terminate using DBUS I/F sudo test/test_pref.sh and select "TERMINATE" choice. Building on Ubuntu 1. Install sudo apt-get install autoconf sudo apt-get install g++ sudo apt-get install libglib2.0-dev sudo apt-get install libdbus-1-dev sudo apt-get install libdbus-glib-1-dev sudo apt-get install libxml2-dev 2 Build ./autogen.sh ./configure prefix=/usr make sudo make install (It will give error for systemd configuration, but ignore) cp data/thermald.conf /etc/init/ 3. Use "sudo start thermald" to start Use "sudo stop thermald" to stop ------------------------------------------- Releases 1.5.4 - Use Processor thermal device in lieu of CPU zone when present - Haswell/Skylake PCH sensor - Fix regression in LCD/Backlight path Release 1.5.3 - PCH sensor support Release 1.5.2 - Security bug for bios lock fix Release 1.5.1 - Regression fix for the default config file location Release 1.5 - Default warning level increase so that doesn't print much in logs - Add new feature to set specific target state on reaching a threshold, this allows multiple thresholds (trips) - Android update for build - Additional backlight devices - New option to specify config file via command line - Prevent adding cooling device in /etc via dbus - Whitelist of processor models, to avoid startup on server platforms Release 1.4.3 - One new dbus message to get temp - Fixes to prevent warnings Release 1.4 - Extension of DBUS I/F for developing Monitoring and Control GUI - Added exampled to thermal-conf man page - Support INT340X class of thermal control introduced in kernel 4.0 - Reinit without restart thermald to load new parameters like new control temperature - Fix indexes when Linux thermal sysfs doesn't have contiguous zone numbering - Support for new Intel SoC platforms - Introduce back-light control as the Linux back light cooling device is removed - Restore modified passive trip points in thermal zones on exit - Virtual Sensor definition - Fix loop when uevents floods the system - Error message removal for rapl sysfs traversal - Coverity error Release 1.3 - Auto creation of configuration based on ACPI thermal relationship table - Default CPU bound load check for unbinded thermal sensors Release 1.2 - Several fixes for Klocworks and Coverity scans (0 issues remaining) - Baytrail RAPL support as this doesn't have max power limit value Release 1.1 - Use powercap Intel RAPL driver - Use skin temperature sensor by default if available - Specify thermal relationship - Clean up for MSR related controls as up stream kernel driver are capable now - Override capability of thermal sysfs for a specific sensor or zone - Friendly to new thermal sysfs Release 1.04 - Android and chrome os integration - Minor fixes for buggy max temp Release 1.03 - Allow negative step increments while configuring via XML - Use powercap RAPL driver I/F - Additional cpuids in the list - Add man page with details of usage - Added P state turbo on/off Release 1.02 - Allow user to change the max temperarure via dbus message - Allow user to change the cooling method order via an XML configuration - Upstart fixes - Valgrind and zero warnings on build Release 1.01 - Implement RAPL using MSRs. - User can configure cooling device order via XML config file - Fix sensor path configuration for thermal-conf.xml, so that user cn specify custom sensor paths - Use CPU max scaling frequency to control CPU Frequencies - RPM generation scripts - Build and formatting fixes from Alexander Bersenev Release 1.0 - Tested on multiple platforms - Using PID version 0.9 - Replaced netlink with uevents - Fix issue with pre-configured thermal data to control daemon - Use pthreads version 0.8 - Fix RAPL PATH, which is submitted upstream - Handle case when there is no MSR access from user mode - Allow non Intel CPUs version 0.7 - Conditional per cpu control - Family id check - If no max use offset from critical temperature - Switch to hwmon if there is no coretemp - Error handling if MSR support is not enabled in kernel - Code clean up and comments Version 0.6 - Use Intel P state driver to control P states - Use RAPL cooling device - Fix valgrind reported errors and cleanup - Add document Version 0.5 - License update to GPL v2 or later - Change dbus session bus to system - Load thermal-conf.xml data if exact UUID match Version 0.4 - Added power clamp driver interface - Added per cpu controls by trying to calibrate in the background to learn sensor cpu relationship - Optimized p states and turbo states and cleaned up - systemd and service start stop interface Version 0.3 - Added P states t states turbo states as the cooling methods - No longer depend on any thermal sysfs, zone cooling device by default - Uses DTS core temperature and p/turbo/t states to cool system - By default only will use DTS core temperature and p/turbo/t states only - All the previous controls based on the zones/cdevs and XML configuration is only done, when activated via command line - The set points are calculated and stored in a config file when it hits thermal threshold and adjusted based on slope and angular increments to dynamically adjust set point Version 0.2 - Define XML interface to set configuration data. Refere to thermal-conf.xml. This allows to overide buggy Bios thermal comfiguration and also allows to extend the capability. - Use platform DMI UUID to index into configuration data. If there is no UUID match, falls back to thermal sysfs - Terminate interface - Takes over control from kernel thermal processing - Clean up of classes. Version 0.1 - Dbus interface to set preferred policy: "performance", "quiet/power", "disabled" - Defines a C++ classes for zones, cooling devices, trip points, thermal engine - Methods can be overridden in a custom class to modify default behaviour - Read thermal zone and cooling devices, trip points etc, - Read temprature via netlink notification or via polling configurable via command line - Once a trip point is crossed, activate the associate cooling devices. Start with min tstate to max tstate for each cooling device. - Based on active or passive settings it decides the cooling devices
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.