khubik2/pysweeper

BaryonSweeper - a JigKick internal service tool emulator

pysweeper's Issues

Comport busy

Hello Everyone,
I made the breadboard setup, have Python and all of the packs installed, magic memory card created, and can run the sweeper. However, when I run the program and connect to the nodes on the PSP, it stops and says the comport is busy.

Any ideas what is wrong?

Trying to reach someone who could help me

Hello. I`m just trying to find someone who could know something about psp battery eeprom to develop a project.
I am trying to make custom batteries and wanna try to make custom eeproms to get correct percentage and duration info on the psp

We Need A PSP Go Details Tutorial

@khubik2 @zecoxao I'm little confused about psp go, the only new is this https://www.psdevwiki.com/psp/Psp_Go_Jigkick, but this tutorial need a psp go dock n340 and is expensive, and is more cheaper go to a techinian or buy a almost new psp go. Only this with the dock work with psp go?

PSP Go ? Someone?

@khubik2 @zecoxao Hi, i try to make some change in my PSP Go (N1004) and mess up with flash0 and flash1 and had brick and show me this now, i press the O but just restart and the same message, you have any solution how to fix it? Can fix it with this tutorial from here?

PSP-3004 - 9C (2 PSP's)

Hello, so I have been watching your tutorial and decided to give it a try with both of my PSP ending with 9C.
I have zero knowledge on USB TTL - Arduino but following your tutorial seems OK I guess since I'am getting response from the PSP.
I see some are supported some are NOT (9C) .

How do you know if it's supported or not ?

Here is my log:

5A 02 01 A2
A5 05 06 10C306 76
5A 02 0C 97
A5 06 06 FFFFFFFF 52
5A 02 0D 96
A5 07 06 9D10102814 54
5A 02 08 9B
A5 04 06 E204 6A
5A 02 16 8D
A5 13 06 536F6E79456E6572677944657669636573 6B
5A 0B 80 0D2072C28ABBC07E93 A3
A5 12 06 82D11E642C3E9115F97652736D2A3DD0 85
5A 0A 81 952CA4959A90B94A F3
A5 12 06 D6D6F9331445ABAFDE29F6450365C060 ED
5A 0B 80 045B56D400FF60D7B5 A6
A5 12 06 7FBCEE4A7A61F4D570430FA2208E5588 3C
5A 0A 81 1DF8A545A4BDE05E 7C
A5 12 06 87359D3E063D827091FAE8EC2EA25200 F5
5A 0B 80 976BD639CD8D04385C 17
An exception occurred in IO loop: TypeError("'str' object cannot be interpreted as an integer")

I believe object cannot be interpreted can confirm my 9C is not supported ? Or it can be some other issue?
My PSP has no power led, but has the memory sitck led blinking.

Thank you,

PSP 2004 Datacode 8B won't work, could anyone help me please? [DETAILED]

Hi everyone.
I'm currently trying to unbrick my psp 2004 with datacode 8B and BaryonSweeper method. The main problem is that the program works fine and trigger the psp to boot, but the psp just stays with the green led and black screen.. nothing happens. That's the procedure I followed:

First of all I downloaded [pysweeper.py](http://pysweeper.py/), Python and all the required libraries.

I built the BaryonSweeper with the CH340G module (also tried with the CP2102), a breadboard, a 1n4148 diode and some jumper wires.

Then I used JigKick Media Creation on the Memory Stick and performed the operation.

I put my memory stick in the psp and the AC Adapter as well (without any battery of course).

I opened the [pysweeper.py](http://pysweeper.py/), started service on the right recognized COM port

I put the wires GND in the left pin, RX in the middle pin and 3V3 in the right pin.

Hex codes shows up in the application and the psp boot, and shows the green led (power) and a black screen. No memory stick led blinking or other else. If I keep the wires in the pins, pysweeper shows Hex codes in loop.

I would really appreciate if anyone could help me to bring back my old memories. I remember that I bricked the psp trying to install some custom firmware (really don't know how or when, I think 5-6 years ago or more).

Things that I tried:

Running the pysweeper on different OS (Ubuntu)

Tried SONY Memory Stick PRO DUO and SANDISK Memory Stick Pro Duo

Tried to make a magic memory stick with RainsUltraLiteMMS application.

Tried 5V and 3V3

Tried ARK-4 MMS

Tried all JIgKick Software options

Tried extracting IPL from the archive the software downloads, flashing it with Rain's IPL tool then copying DDC files over to MS manually.

Video 1 of what I'm doing: https://www.youtube.com/watch?v=mDMBI4DzNjQ
Video 2 of what I'm doing: https://youtu.be/ur-Smgl6uOE

Did the key 151 lost in the keys.json

in the keys.json. challenge1_secret and challenge2_secret contains the 151. but,the keystore no contains 151.did it lost.
5A 0B 80 97BB9312C44CADB431 81
this is the last i reviced from serial port. 151 is i need.
pls update the keys.json,or provide the documentation.
thanks a lot.

PSP-3001 TA-090

Hello, I wanted to ask if this is compatible with the PSP-3001, it has the TA-090 plate and I don't know its DateCode, it doesn't have it on the battery sticker.
The green light comes on at startup but goes off after 2 seconds.

[HELP] Anyone for PSP Go

@khubik2 @Yoti @zecoxao
Because i don't have the FT232RL need it for this and can't get it, i have USB to Serial Module - CP2102, DC-DC Step-Down 1.8-12V 2A - MP2315, 4-channel I2C-safe Bi-directional Logic Level Converter - BSS138 and resist and diode and the non original psp cable, anyone know how can use all this to make it 1.8V need the PSP Go for open the service menu ? Any details tutorial

TA-088v2 DATECODE 8B is not working.

Hello,

I tried to use this method with an European Crisis Core PSP 2000 with TA-088v2 and DATECODE 8B, but it never starts the service mode . I know this model is able to run with a Pandora's battery. However, in the Wololo forum they mentioned that now all the models are supported by Baryon Sweeper.

In the README.md compatibility list you mentioned:

PSP-2000 | Any besides 8C | Supported, any magic MS

Are we missing a key for this kind of model?

Stuck at A5 05 06 10C306 76 on PSP-1000

I have a launch model PSP 1000 that I'm trying to debrick, I hooked up the PSP battery pins to a PL2303HXA USB-to-TTL converter and started service, here's the logs :

Service started. Using serial FFFFFFFF 5A 02 01 A2 A5 05 06 10C306 76

Full Tutorial PSP Go

@khubik2 @zecoxao As i see now can enter service mode in PSP Go, but we need specific FT232RL with 1.8v and soldering skill, if anyone want build itself this where we connect the cables to the head if need it? Can't found a tutorial on internet, only this cable, and is easy just cut and soldering the non original cable to FT232RL ?

Mac/linux compatible issue

Has this script been tested on mac/linux?
I tried this on my Mac and the console printed 5A 01 02 A2 5A0102A25A0102A2....

But it succeed on a Windows laptop.