BIPM feedback on MEP Kelvin

[metanorma]

BIPM feedback on MEP Kelvin

[manuelfuenmayor]

Working on this one...

[manuelfuenmayor]

Generated PDF reviewed by BIPM: mep-kelvin-definition-en.presentation.pdf

[manuelfuenmayor]

All issues are fixed in #55

Except the ones that are not markup-related:

Location	Issue
4	the words with hyperlinks are not identified, throughout whole document
5	definition of the kelvin is not easily distinguishing from surrounding text: bold font
	5th paragraph below definition: µ not in italics
	6th paragraph: replace clause by section, throughout the document
6	1st paragraph: could we have 1 and 2 instead of a and b, as in the list just below

Ping @Intelligent2013

[manuelfuenmayor]

6 | 1st paragraph: could we have 1 and 2 instead of a and b, as in the list just below

@opoudjis , I believe this one is part of your area? I have opened a ticket in metanorma/metanorma-bipm#68

[Intelligent2013]

4 | the words with hyperlinks are not identified, throughout whole document

Fixed.

5 | definition of the kelvin is not easily distinguishing from surrounding text: bold font

It isn't xslt issue. Definition of the kelvin In adoc should be marked as bold.

5th paragraph below definition: µ not in italics

See 1st comment here: #51 (comment)

6th paragraph: replace clause by section, throughout the document

It isn't xslt issue. ping @opoudjis

6 | 1st paragraph: could we have 1 and 2 instead of a and b, as in the list just below

Source XML issue.

<p id="_295059f4-4697-4810-9f27-1c841b5d2cde">The purpose of this section is to clarify the terms that will be used in the following sections on <xref target="item-1">a)</xref> primary thermometry and <xref target="item-2">b)</xref> defined temperature scales. A clear and well-defined nomenclature is essential to support an unambiguous taxonomy of methods in the <em>MeP</em>-K. The <em>MeP</em>-K uses the following definitions.</p>
			<ol id="_2569779b-901d-48ac-b3d6-7a2b2bb137dd" type="arabic" start="">
				<li id="item-1">
					<p id="_9dd6a78f-5505-4ef5-b972-fe1f6a67b546">
						<em>Primary thermometry</em>

ping @opoudjis

[opoudjis]

6 | 1st paragraph: could we have 1 and 2 instead of a and b, as in the list just below

metanorma/metanorma-bipm#68 has been resolved.

6th paragraph: replace clause by section, throughout the document

Has also been resolved in #40

There's a few moving parts still ongoing, but I propose to do release Monday, and will regenerate all docs for re-review then.

[manuelfuenmayor]

Based on latest PDF release: mep-kelvin-definition-en.pdf

Remaining issues:

Location	Comment	Issue
5	definition of the kelvin is not easily distinguishing from surrounding text: bold font	not fixed

Ping @Intelligent2013

[Intelligent2013]

5 | definition of the kelvin is not easily distinguishing from surrounding text: bold font

In source .adoc it marks as quote without bold:

== Definition of the kelvin

The definition of the kelvin, SI base unit of temperature, is as follows <<bipm>>:

____
The kelvin, symbol K, is the SI unit of thermodynamic temperature. It is defined by taking the fixed numerical value of the Boltzmann constant stem:[k] to be stem:[1.380649 xx 10^{-23}] when expressed in the unit stem:["J K"^{-1}], which is equal to stem:["kg m"^2 "s"^{-2} "K"^{-1}], where the kilogram, metre and second are defined in terms of stem:[h], stem:[c] and stem:[Delta nu_{"Cs"}].
____

Add * around text.

[opoudjis]

Add * around text.

We have established that boldface MathML simply doesn't work, but yeah, they can try that.

[manuelfuenmayor]

Done. Thanks!
No issues in this thread.

[anermina]

Since no issues left, closing.