This is less of an issue than a clarification. I noticed several values in the config.py were different than their "default" value according to the comments. Like resolution is set to 1280x720, but according to the comments, default is 1920x1080. There was also the shuttertime(?) that should be no more than 5 according to the comments, but was set to 5.8 by default.
But my main question would be about the timer for the timelapse setting, which is by default set to 5_60, which i assume means 5 x 60 sec = 5 minutes. What if i wanted it at 30 sec? Would that be 0.5_60 or 1*30? Maybe both would work? I dunno, but the comments could very well give an example.
If i may be very picky, the installation guide could use a little tidy-up, especially the 'Setup init.d to run pi-timolo on boot' part was confusing to me. I should probably add that English is my 2nd language, and Linux is pretty new to me. I don't wan't to sound like a brat, so i hope you read this as constructive criticism and not whining. And thanks for these great scripts, i'm about to start a 24hr timelapse of my view :)
EDIT! Bonus question: I've set pi-timolo to run on boot. How do i stop it temporarily, say if i wanted to convert a group of pictures into a timelapse video?