[iCubParis02] No boards found

[robotology]

[iCubParis02] No boards found

[rlober]

As I am pretty much talking to myself here I will be quick.

The first issue was related to the issue I referenced earlier.

The second issue I believe has to do with the fact that can net 4 has some loose connections on it. I am going to take a look at them and see if I am right. For now I will close this issue and if securing those connections doesn't fix this problem then I will reopen. In any case I will post the results after a bit of maintenance.

[rlober]

Update:

I can now successfully run ./updateRobot.sh and it produced the following:

cfw2can 0 1 2BLLDC.1.62.out.S --> ALL OK
cfw2can 0 2 4DC.2.15.out.S --> ALL OK
cfw2can 0 5 2BLL_IE.2.54.out.S --> ALL OK
cfw2can 0 6 2BLL_IE.2.52.out.S --> ALL OK
cfw2can 1 1 2BLL_IE.2.50.out.S --> ALL OK
cfw2can 1 2 2BLL_IE.2.57.out.S --> ALL OK
cfw2can 1 3 4DC.2.19.out.S --> ALL OK
cfw2can 5 5 4DC.2.28.out.S --> ALL OK
cfw2can 5 7 4DC.2.30.out.S --> ALL OK
cfw2can 2 1 2BLL_IE.2.50.out.S --> ALL OK
cfw2can 2 2 2BLL_IE.2.57.out.S --> ALL OK
cfw2can 2 3 4DC.2.19.out.S --> ALL OK
cfw2can 6 5 4DC.2.28.out.S --> ALL OK
cfw2can 6 7 4DC.2.30.out.S --> ALL OK
cfw2can 3 5 2BLL_IE.2.51.out.S --> ALL OK
cfw2can 3 6 2BLL_IE.2.51.out.S --> ALL OK
cfw2can 3 7 2BLL_IE.2.51.out.S --> ALL OK
cfw2can 4 8 2BLL_IE.2.51.out.S --> ALL OK
cfw2can 4 9 2BLL_IE.2.51.out.S --> ALL OK
cfw2can 4 10 2BLL_IE.2.51.out.S --> Error: ERR_BOARD_ID_NOT_FOUND

When I run canLoader, on Net 4 I can see number 10 so I manually downloaded the BLL.

I am not sure but it seems this issue is related to my other issue:
robotology/yarp#498