santiagosaldana/sbc

Arduino Library to connect to the Steel Battalion Controller using a Teensy 4.0 / 4.1

sbc's Issues

HDJOY only 32 buttons

When using HDJOY it will show a max of 32 buttons? None of the toggles, gear lever or tuner dial works and a couple switch's and two of the three Pedals do not work. Anything that is coded with a number above 32. Buttons also do not light up when pressed, It doesn't just seem to be a windows thing as Pointy's Joystick test cannot register them sending input either. Teensy 4.1, Arduino 1.8.19, Teensyduino 1.5.7, SBC 0.0.3. Everything seems to be compatible and firmware flashes fine. I have also tried it with the Versions you linked and same issues.

Please officially add Teensy 4.0 and 4.1 support

Recently, the ArduinoXInput_Teensy library added Teensy 4.0 and 4.1 support, and I wanted to ask if you could adapt the SBC library to work with them as well. Also, could you please update the instructions on Hackaday to reflect these new developments?

USB HID report descriptor?

Just a question, but how does the library handles the HID report? Does it send the raw info from the controller or do you edit in some way? I tried to read the Teensy library you are using, but even then, I wasn't able to understand the same way I did with the Arduino Joystick Library, or the many Blue Pill examples.