sparkfun/fritzing_parts

This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication.

Fritzing Parts

This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication. Make sure to also check Fritzing software for additional boards.

Repository Contents

• /kits - Fritzing circuits (*.fzz) and images (*.png)from a few of our Inventor's Kits
• /parts - Common Fritzing parts and vector (*.svg) files of individual components on SparkFun boards
• /products - Fritzing boards (*.fzpz and some *.fzz)
• /templates - SparkFun T5403 Barometer Breakout vector (*.svg) templates used in the SparkFun tutorial to Make Your Own Fritzing Part

Documentation

• Make Your Own Fritzing Parts

Contributing/Adding Fritzing Parts

Please check out the Fritzing tutorial here for more information.

fritzing_parts's Issues

Error when importing fritzing library

Recreate:
I either open the fzbz file or import it but get the same error:

Parse error (2) at line 65, column 57:
Expected '>' or '/', but got '[a-zA-Z]'.
/home/name/Documents/Fritzing/parts/contrib/SparkFun_BadgerStick.fzp

ZX Sensor missing?

https://learn.sparkfun.com/tutorials/zx-distance-and-gesture-sensor-hookup-guide

As you can see the doc here has a fritzing diagram, but then I can't find those parts (or the file anywhere) in your repo. Any ideas?

intel edison blocks

Howdy, it would be awesome to have the sparkfun intel edison blocks available in fritzing, especially your block template. This could make new blocks, like including cc1111 or a wixel easier. Thanks!

Missing TMP006 part

Hello,

I'm trying to sketch my project in Fritzing but it's missing the TMP006 part. May you help me, please?

Thank you very much.

Best regards

Request: SparkFun Transceiver Breakout - MAX3232

Fritzing has an RS-232 transceiver, but the SparkFun variant follows a much different layout.

Transflash GND and VCC are Swapped In Schematic View

I'm using this breakout board from the library.

https://www.sparkfun.com/products/544

It looks like the GND and VCC labels are swapped on the part in he schematic view.

ESP8266 Thing is missing some connectors

Hi,
I just noticed that the ESP8266 fritzing part is missing the RST pin and the (two?) DTR connectors.
The WIFI antenna connector would also be nice ...
(The dev board is also affected)
I tried to edit the schematics myself, but failed.

Please fix :)

gator:environment is missing from SparkFun Plus file

Hello SparkFun Team - I've come here to report the fact that the gator:environment board is not found in the Sparkfun Plus bin - the product page says that the board is fritzing ready but it's only in the products folder.

LM7805 swaps legs in PCB view

Using the Sparkfun library part will give anyone using it a decent short. Using this part, it connects ground to VIN on my PCB. Using the generic TO220 piece, it's correct in both views. Please fix and pull into next version of Fritzing?

Missing Fritzing file for ZED-F9P breakout board (product # GPS-15136)

Like the title says, it would be nice to have the Fritzing fzpz part for the F9P breakout board.

Missing license.txt!

It's unclear what license the assets in this repository fall under, these images/fritzing diagrams are widely republished across the internet and it would be good to add an explicit copyleft license such as creative commons share-alike w/ attribution: https://creativecommons.org/licenses/by-sa/4.0/

Missing Fritzing file for SparkFun Arduino ProtoShield (DEV-13819/ DEV-13820)

It would be really useful to have a Fritzing file for the SparkFun Arduino ProtoShield. Being new to PCB design, I would find it reassuring to know that the parts I've laid out on the board match the design schematic in Fritzing's Breadboard/Schematic back-and-forth view.

Suggestion: Add instructions on how to import the parts

As it stands, I'm unsure how to import these into Fritzing. I can do them one at a time through the GUI, but that would take absolutely ages.

Is there a way to import them all at once?

Not a usable part in Fritzing

The Powercell fritzing part is un-useable. It has copper pads for all of the surface mount components that interfere with the traces. It would be great if I wanted to make my own power cell, but useless if I want to include the spark fun power cell in my project. I tried modifying it but there is some sort of hidden mask layer that still interferes with the traces and that mask layer actually comes out in the PCB and creates a gap in the copper layer.

Please help, don’t want to waste more money trying to find errors in the power cell fritzing part.

.fzbz files

#Is there an intention to bring back a .fzbz file? I seem to remember there was one when I first downloaded the bin. There are over 200 parts in the bin now and it would be nice to have a .fzbz rather than have to add them one at a time. Thanks.

The new reference an issue doesn't let you reference closed issues, apparently, but I'm going to reference issue #16 no .fzbz file to import.

13263?

Does anybody have or know where I can find a Fritzing file for 13263 (https://www.sparkfun.com/products/13263)? I really am trying hard to learn the parts editor to make one myself (and if I do I'll add it here) but I am struggling with lack of drawing skills... :(

missing L6470-AutoDriver

This library is missing the Sparkfun L6470-AutoDriver V10 and V13 boards (different connector pinouts).

Pull in Weather Shield Fritzing part

Pull into Fritzing library, and clean up from Weather shield repo

Is this the official SPE repo for fritzing parts?

Is this the official SPE repo for fritzing parts?

I've not been up to date with SPE fritzing library for about a year. Was looking for a part for this interrupter breakout board but didn't find fritzing part:

https://www.sparkfun.com/products/9322

I was making some workshop slides BTW.

Thanks.

Connector Labels not showing

Connector Labs are not showing 10617_sfe_lipo_fuel_gauge (

no .fzbz file to import

There is no .fzbz file to import and the README.md doesn't state how exactly to import this part library into Fritzing.

Where to put these files

It would help if the README stated where exactly I have to put these directories and files so Fritzing picks them op. I tried parts/contrib and parts/user, to no avail.

A small set of hints would be much appreciated.

Pull in Microview Fritzing images

From the Microview repo here.

Errors in "BOB-12009 Bi-Directional Logic Level Converter.fzpz" part

Hi,

There are errors in the part " Fritzing_Parts / Products / Breakout Boards / BOB-12009 Bi-Directional Logic Level Converter.fzpz". The pins in the schematic view are incorrect.

Thanks.