tdowrick/ros-igtl-bridge

ROS node to exchange data between ROS and medical image computing software using the OpenIGTLink protocol.

ROS-IGTL-Bridge

Author:Tobias Frank, Junichi Tokuda (Brigham and Women's Hospital)

This ROS-Node provides an OpenIGTLink bridge to exchange data with ROS. It supports sending and receiving Transformations, Images, Strings, PolyData, Points and Pointclouds. For further information regarding the OpenIGTLink protocol please see:

• http://openigtlink.org/

---

Build Instruction

The following steps were tested on:

• Ubuntu 14.04 + ROS Indigo
• Ubuntu 16.04 + ROS Kinetic Kame

First, install OpenIGTLink in your local computer. A detailed instruction can be found at http://openigtlink.org/. In the following instruction, we assume that the build directory for the OpenIGTLink library is located at: ~/igtl/OpenIGTLink-build

$ cd <your OpenIGTLink directory>
$ git clone https://github.com/openigtlink/OpenIGTLink.git
$ mkdir OpenIGTLink-build
$ cd OpenIGTLink-build
$ cmake -DBUILD_SHARED_LIBS:BOOL=ON ../OpenIGTLink
$ make

Install ROS and follow the standard ROS instructions to create your ROS workspace if necessary.

$ mkdir -p ~/catkin_ws/src
$ catkin_make
$ source devel/setup.bash

Then download the ros_igtl_bridge package from GitHub:

$ git clone https://github.com/openigtlink/ROS-IGTL-Bridge

and execute catkin_make in your workspace directory:

$ cd ~/catkin_ws/
$ catkin_make --cmake-args -DOpenIGTLink_DIR:PATH=<your OpenIGTLink directory>/OpenIGTLink-build

To run the bridge, type:

$ roslaunch ros_igtl_bridge bridge.launch

If the bridge is set up, you can launch the test procedure for communication with [3D Slicer] (https://www.slicer.org/):

$ roslaunch ros_igtl_bridge test.launch  

It is possible to edit the launch files and set your IP & Port in the file. Run the node as server or client by adjusting the parameter RIB_type. Open the file and uncomment the lines:

$ <!--param name="RIB_server_ip" value="111.111.111.111" type="str"/-->
$ <!--param name="RIB_port" value="18944" type="int"/-->
$ <!--param name="RIB_type" value="client" type="str"/-->

The node can be run as server or client. If you executed the test procedure, the node will send a "ROS_IGTL_Test_Transform" with random translation, a random "ROS_IGTL_Test_Point", a random "ROS_IGTL_Test_Pointcloud" including 20 points, a "ROS_IGTL_Test_String" and a "ROS_IGTL_Test_PolyData", which is a rendered model of the 3D Slicer MRHead sample data. Any data received from 3D Slicer is published to a ROS topic by the bridge node and displayed by the test node.

References

1. Frank T, Krieger A, Leonard S, Patel NA, Tokuda J. ROS-IGTL-Bridge: an open network interface for image-guided therapy using the ROS environment. Int J Comput Assist Radiol Surg. 2017 May 31. doi: 10.1007/s11548-017-1618-1. PubMed PMID: 28567563.