thanasists/cartesian_trajectory_tracking

Cartesian trajectory execution by a UR3 Cobot

cartesian_trajectory_tracking

Overall Functionality

This package provides the utility for cartesian trajectory tracking by a robotic manipulator (UR3 COBOT). Currently, only the position of the end effector can be controlled.

Input

The trajectory points are geometry_msgs/PointStamped.

Robot Motion Generation

The generation of the commands is based on two frameworks.

• P Controller: The P controller generates velocities based on the spatial error between the control points and the end effector's current position.

• PD Controller: The PD controller generates velocities based on computed acceleration. The acceleration is constructed by the spatial error between the control points and the end effector's current position, and the end effector's current velocity.

Once the end effector's commanded velocities have been computed, they are sent to a Cartesian Velocity Controller, which accepts cartesian velocity commands.

Dependencies

This repo depends on:

• End effector state msgs here.

Run

• In a terminal run roslaunch cartesian_trajectory_tracking cartesian_trajectory_tracking.launch

• Arguments

  • p_control: true if P Controller is used (false for PD)
  • gazebo: true if running Gazebo