Giter Site home page Giter Site logo

fritzing-library's Issues

adafruit.fzbz broken

I think the new Adafruit.fzbz is broken, im not able to download it correctly. Older ones work fine.

Parts request

Hello,

I am looking for parts for the following components.

GPS Breakout; Product id: 746
LMS303 Compass board; Product id: 1120
L3GD20H Gryo; Product id: 1032

/parts/MCP23017.fzpz - Breadboard and PCB view pin order error

File Commit Date: Sept 12, 2012

Using this datasheet as a basis to work from: http://ww1.microchip.com/downloads/en/devicedoc/21952b.pdf

---Breadboard View---
Going though each pin on the chip one by one in breadboard view, pins 9-14 do not match with id: connector9-connector14. This results in VSS and VDD being swapped and SCL and SDA being swapped.

Pin 9
Currently connector10 (VSS) and should be connector9 (VDD).

Pin 10
Currently connector9 (VDD) and should be connector10 (VSS).

Pin 11
Currently connector14 (NC) and should be connector11 (NC).

Pin 12
Currently connector13 (SDA) and should be connector12 (SCL).

Pin 13
Currently connector12 (SCL) and should be connector13 (SDA).

Pin 14
Currently connector11 (NC) and should be connector14 (NC).

---PCB View---
Pins 9 & 10 do not match the datasheet resulting in VSS and VDD being swapped.

Pin 9
Currently connector10 (VSS) and should be connector9 (VDD).

Pin 10
Currently connector 9 (VDD) and should be connector10 (VSS).

Pins 11-14 look correct.

PermaProto board - no wires in schematic view

Hello,
When using Permaproto full or 1/2 size board in Fritzing, no wires show up in Schematic view between my components placed on the board.

If the fix is to edit the XML, please let me know what needs to be added and I will add it. I did try adding a schematicView for a row of connectors, but no luck.

Thanks,
Stephen

New Part: ADXL345 Breakout board

Would like to use the Adafruit ADXL345 breakout board in Fritzing but it is unavailable. Adafruit's 335 and Sparkfun's 345 are but all use different pinouts.

Add Parspberry PI Compute

Hello,

Please add Raspberry PI compute module to your library. Including SODIMM connector if possible.

Thanks.

CC3000 shield pins don't line up with Uno or Due

The pin placement fo the CC3000's shield from this library (downloaded today) don't line up with the Arduino Uno or Due in Fritzing 0.9.0, so you are not able to "drop" the CC3000 on top of the Arduino in the breadboard view.

Request for 2.8'' TFT breakout board part

Dear Adafruit team,

I desperately need the part to finish the diagram for my master thesis. I would be very thankful if you could make this part for me.

Regards,
Eric

Rotary Encoder with Knob

Connectors on PCB and Breadboard views don't match with that on Schematic view. Encoder "B" and "COM" are swapped over.

Issue with Raspberry Pi component and Fritzing

Hello,

I just want to report a bug between Raspberry Pi component and Fritzing, from version 0.7.5b (don't know before this one as I didn't use Fritzing) to 0.7.7b (the current one as I write this issue) : the connection to the pin labelled GPIO #22 is not on the header itself, but somewhere on the board (see picture below)

Bug

I just don't know if the issue comes from Raspeberry Pi component or Fritzing app.

Thanks.

ULN2803 Darlington Array is incorrect ...

If I create a sketch with a ULN2803 the GND and COM pins are switched in the schematic.

XML has

        <connector id="connector9" type="male" name="COMMON">
            < escription>no description yet</description>
            <views>
                <breadboardView>
                    <p layer="breadboard" svgId="connector9pin"/>
                </breadboardView>
                 <schematicView>
                    <p layer="schematic" svgId="connector9pin"/>
                </schematicView>
                <pcbView>
                    <p layer="copper0" svgId="connector9pin"/>
                </pcbView>
            </views>
        </connector>

and

        <connector id="connector10" type="male" name="GND">
            <description>no description yet</description>
            <views>
                <breadboardView>
                    <p layer="breadboard" svgId="connector10pin"/>
                </breadboardView>
                <schematicView>
                    <p layer="schematic" svgId="connector10pin"/>
                </schematicView>
                <pcbView>
                    <p layer="copper0" svgId="connector10pin"/>
                </pcbView>
            </views>
        </connector>

Which are the wrong way round.

Protoboard is on the 'parts' layer, not breadboard layer.

The Protoboard should be on the 'breadboard' layer in Breadboard view, which would mean it would display below parts. This can't be done directly in the editor, but can be done by manually editing the fzp file to change the layer from "breadboard" to "breadboardbreadboard".

No PCB layout for Neopixel Flora

I am trying to incorporate the Flora into a PCB board I am designing and it won't let me add this to my board. It looks like it is not included. Is this in development or impossible due to lack of datasheets? Thanks.

add license file

Thanks for the great library! We've created a modified version of one of the components and need to know specifically what license it should be released under? https://github.com/zebradog/fritzing-pololu-led-60

we enthusiastically encourage you to learn from, modify and re-share our Fritzing library

... is fantastic, but not 100% clear.

T Cobbler Plus pins are mislabeled/wrong

Using the latest Fritzing parts I find that the T-Cobbler Plus pins are mislabeled. To see this, open up the T-Cobbler Plus and open the parts editor. Select the pin labeled on the board as "#20" and see that it is actually flagged as GND. There are many other pins mislabeled. The board image is correct but the connector list is wrong.

See attached screen shot for an example.

2015-03-30_17-31-12

FLORA Sensors SGV Image not Loagind Properly

Using Fritzing 0.9.0b I have noticed that a few of the FLORA sensors do not load the board image. This applies to the Following
Flora Accelerometer/Compass
Flora Color Sensor
Gemma
Flora Lux Sensor.

The outline of the board and connections are loading, but the svg for the background of the board is not.

Request for Raspberry Pi Rev 2 model

The current Raspberry Pi model in this repo only shows the pinout for the Revision 1 RasPi, and there's no options for displaying the pinout of the Revision 2 RasPi (the one with the mounting holes). http://elinux.org/RPi_Low-level_peripherals has all the details...

Additionally, it would be nice if the existing Revision 1 RasPi model was updated to show the definitions of all pins (they're all fully defined now and are no longer DNC), rather than showing several as "--".

Thanks!

Parts in the Schematic view are too big.

Hi,

in the schematic view, many of the probably "older" parts in the library are too big in relation to the other parts. I have attached a screenshot. All "older" parts including the "TPA2016 Stereo Amplifier" are about three times as big as they should. The "TMP007" and later parts are in scale.

Maybe there is an easy way to fix it?

Best

htho
2015-01-13-222927_1078x676_scrot

Part request

Adafruit 12-Channel 16-bit PWM LED Driver - SPI Interface
PRODUCT ID: 1455

Adafruit FLORA RGB Smart Pixel -> NeoPixel

Adafruit marketing makes me think this should be called a "NeoPixel" and I had to shark out what else it might be called. Thanks for putting this all together: its a great resource and awfully comprehensive.

Do these files work with 7.11?

I've installed Fritsing 7.11 and it will not import these fzpz files.

"Unable to open shareable part"

Is it an issue with version compatibility?

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.