chrismettal/elelab_v2

Cheap DIY lab system for hobbyists and the tinkering folk

Chrismettal - Binary-6 Full stack engineer working on software, electronics and mechanical design for 3D printing. Free and open source software/hardware advocate. Arch User. Links Github - where I host most of my projects Printables - hosts my 3D printable projects that don't use source control. Tindie - where some parts of my projects are sold. Socials Discord: Chrismettal - Binary-6 | @chrismettal Twitter: @Chrismettal Mastodon: @[email protected] Email: [email protected] Donations If you like my work please consider supporting my caffeine addiction! Paypal BTC: bc1q33f56ufemtpdrwleemlmx4nc0tgkufc778yfqf ETH: 0xf265a43BF4b8Aa90b82919a81438872d092f30BF DOGE: DAKXGpR8yqgxrnZpVoxHBLbLbQnuwXcYJt Donation QR Codes

Flipper Zero Backpacks PedalDev EleLab_V2

elelab_v2's Issues

Gitlab link is to wrong repo.

The gitlab link (linked from printables)

links to the wrong github repo.

and should link to

https://github.com/Chrismettal/EleLab_v2

BOM?

Hi, do you have a BOM with some sourcing info, for e.g. the stepdown converter modules you used, etc., available somewhere?

Print bed size?

Nice project! Would be helpful if you mentioned up top in the README what size print bed is required and/or some options for printing on smaller printers.

What is binary_6?

There's a component labelled binary_6 on many of your boards, but it doesn't seem to be populated in any of the pictures. What is it?

(I'm guessing a bypass cap?)

24V in + and gnd linked together.

just noticed on the powerfeed board that +24v in and gnd 24v are linked together.
I recommend these pins are seperated to prevent confusion.

Sorry been too busy to work on it.

Raspbery pi module?

It might be nice to add a Raspberry Pi module, with a small display and maybe even a trackpad, so you could do basic "look up on the internet", "I need a calculator", or "toggle this GPIO" tasks.

Multimeter module?

A workbench multimeter can be helpful too it Will be great to have it integrate in a module less cable everywhere when we are using it

Mirror on Github

@Chrismettal it's possible to add a mirror copy from Gitlab to Github?

Here there are the instruction from Gitlab (main on Gitlab -> mirror on Github). Just to not lose the good star/forks integration here and follow the changes from Github :)

If there is a reason to have this moved completely I'm ok with that, just... there is also this option.

Anyway thank you for this project, it's really inspiring 😄

Please post your issues on GitLab!

Hey,

please use the GitLab repository to open new issues as the Github location is only a mirror now.

https://gitlab.com/Chrismettal/EleLab_v2

Thanks!

PCB files?

What program did you use to make the PCBs?
I would like to import into easy eda but just get file error trying to import file.