emilohman/homey-plejd

This App brings support for the Plejd devices.

Plejd

This app allows you to control your Plejd devices directly from Homey, no extra gateway is needed. It uses an unsupported method for communication using bluetooth.

Supported features:

• Toggle state on/off/dim
• Instant state change
• Syncing Plejd internal clock
• Plejd buttons (single click only)

Thanks

Big thanks to @klali and his https://github.com/klali/ha-plejd component for Home assistant, this project would not have been possible without it.

And another big thank to Jonas Almquist and every contributor for your donations that got me a Homey!

homey-plejd's Issues

DAL-01 only possible to turn on/off - not recognised as dimmable in Homey plejd app

Hi, I have a office light connected on DAL-01 (https://www.plejd.com/nb-no/produkter/DAL-01) that is only possible to turn on and off in the app, it does not show dimm levels or the slider. The other DIM units works fin and is dimmable in the setup. Is this possible to add?

Homey: v7.3.0
Plejd: v3.2.5

Won’t work

Pljed stopped working in the app bbc1549d-9e75-4ce1-af62-9ffbbe92dd38

WPH-01-SW - Worked for a few minutes

Needed a switch för replacing an analog switch, boght WPH-01-SW (my first and so far only plejd item). Worked perfect for like 20 minutes, but is now "dead"? Removed device in homey and plejd, added in plejd and then homey (no problems there) and added new device back to my light flow, but nothing happens. Tried with just log a message on click on button, but no log. Any suggestions?
(First pair was in the same room as homey, second pair in real location in hallway, 3 meters from homey with a wall between, wich worked at first).
In developer.homey.app the device is ready, available and no warnings.

Plejd doesn't work with 7.3.0 version of Homey

Homey updated automaticly and after that the plejd Bluetooth mesh is not working.

Homey bridge?

Hi! Do you plan to support homey bridge as well? Hope so!

My Homey Pro doesn´t work with Plejd

My Homey Pro, bought in spring 2022, does not work together with Plejd. The Homey finds the Plejd devices and installs them. They usually work, but not always, for a while so I can turn off, turn on and dim lights. But after a while, less then hours, they always stop working. When I try to turn a light on or off, nothing happens. It’s only 2-4 meters between the Homey and the closest Plejds. What could be wrong?

Problem med feilmeldinger

Jeg har problem med å styre Plejd fra Homey. Er dette det Bluetooth problemet Homey har om dagen som skylder dette eller har du mulighet til å fikse dette? Sende inn diagnoserapport

WPH-01 Homey Pro 2023

Tjena,

Gör säkert något galet men försöker få till mina WPH-01 i garaget att styra garageporten. Har gjort ett flow "A button has been pressed" för att sedan aktivera en Shelly puck som styr portautomatiken.

När jag trycker på knappen får jag ingen reaktion överhuvudtaget. Missar jag nåt ?

Tack på förhand!

Won't dim from flows

When a flow triggers the dim-01 & dim-02 to dim the units to a certain level it only turns on the device to the last used brightness. It says in the app that it is at the requested level but it isn't. You can change the brightness from the scale for the specific device.

Just some questions

First of all; great work!

Secondly: how is it looking like to using the pushes at wall buttons as triggers in homey? Let's say I double click a plejd button and from there trigger a homey scenario? Is this something that could work in the future? Or is this something that would never work due to technical reasons?

Login issue

Hi.
My login to plejd does not work in the homey app.
Any suggestion on how to get around this?

Scenarios

Hello, just wondering if its possible to enable support for scenarios in the app?

Lost connection to all Plejd devices after switched to HP23

Hi
I have lost contact to all my Plejd devices after restored a backup from 2019 to 2023.
Had also, from time to time, same issue in 2019. Then a restart of Homey and/or app used to solve it but not now.

Please help, I know there are lot of other with same issues

/henning

Homey 6.1 trasig app

Får capability listener onoff error på lina plejd ctrs
Med senaste versionen. Funkade för några versioner sedan.

Stopped working since the latest update

Have tried to reboot Homey, and restarting the app but only get "error connecting to BLE mesh"
Worked like a clock before.

Support for SPR-01?

Hi.

Is it possible to add support for SPR-01 smart plug?

BLE network crashes

When trying to controller multiple lights at the same time using a flow the BLE network crashes on my homey 23, have not had that problem on my homey 19.

Homey - WPH-01

Hi, my WPH-01 is added to the Plejd app as the only device and then i added it to Homey. It drops out all the time and i have to restart the app and open the Plejd app for it to Connect again, but then it drops out again. Is this because i dont have the Plejd hub or a bug?

Homey: v7.2.1
Plejd: v3.2.5

Do you need a hub for Plejd in Homey?

I dont have any Plejd devices yet, but maybe in a couple of week. Will the plejd devices add directly to my Homey with the Plejd-app of do I need á hub?

Dubbelklick?

Hej,
Superbra app till Homey, tack:)
Går det att få till dubbelklickfunktionen på wph-01?

Connection problems

Hi! I have issues with the connection. Report: 77e8bf69-12bf-498b-b732-547e50ef56fa

Lost all my connections for 2 days HP19

Hi, for the past 2 days I have no connection to my plejd sw. I restart HP every night as a flow for a year or so. I have now tried to:
restart the plejd app
uninstall and install it again
added removed plejd sw
Plejd works from my iPhone app without any issues-
HP is on the same place as its always been, nothing in the room has changed.
Closest plejd sw from HP is about 2 meters.

3ba376e0-5456-49a0-af39-aa72ea7a1411

Log says that Plejd turned on light.

Hei
Is it possible to get the log to say what flow turned on a light when the light is turns on by getting dimmed? Currently it just says Plejd turned the light on.

Vurderer å installere plejd

Hei! Jeg skal lage smartbelysning i boligen min. Det er for det meste downlights med 2-6 lamper i hver sone, eller 1 taklampe eller 1 ledstripe på 2 meter.

Jeg har vurdert fibaro eller plejd. Fibaro var først det mest aktuelle produktet pga z-wave. Men så fikk jeg med meg at det kunne bli trøbbel pga LED-belysning og lav last, da fibaro dimmer er best egnet for laster 50W.

Vil systemet til plejd fungere like bra som et z-wave-system, og være like fremtidssikkert? Og er lett å integrere med Homey antar jeg 👍🏽😄

Plejd devices unable to connect after electric outage

Had an electric outage in my apartment that shutdown everything. When booting up again Plejd can’t connect to BLE Mesh according to Homey. I’ve tried a full uninstall/install of the Plejd app in Homey with no success. My lamps show up in Homey when doing the reinstall but I’m unable to control them. The devices work as expected in the regular Plejd app. Here’s the diagnostic report code: 6c582ea4-f28c-4967-95e9-965c9d8212b8

Plejd Sockets acts like lights, they get turned off by the card `Turn off all lights in zone`

Can this either be configureable or deactivated? This is a method for me to remote turn off and on my internet modem. Annoyingly it turns off everytime the light goes out.. :)

Guessing it has devicetype "Light"? But it is a wall socket :D

Dim light with duration?

Hi
Is it possible to add duration once a light source is enabled or Disabled? For example a light goes from 0% to 100% dim during a 2 second period.

Support for REL-02

I just tried to add a REL-02 device. It does not seems to work as the unit is a dimming device.
Any workarounds?
/trinxie

Bevegelsesføler

Hei, jeg lurer på om Plejd bevegelsesfølerne er støttet i appen, Jeg har prøvd å få lagt de inn, men for bare lagt de inn som en lyskilde. uten bevegelsesføler funksjonen

Support for "duration"

Hi,

Is it possible to add support for "duration" as IKEA devices supports? Or is it a Zigbee specific feature maybe?

See https://github.com/athombv/com.ikea.tradfri/blob/72f14571df095a7365c903be1c5d171edb642e75/drivers/rgb_bulb/driver.compose.json#L17

States solved in 4.2.0?

4.2.0 came with a BTE ”allow write with response”. Could that solve the issue with knowing the lights states directly in Homey?

Issues with connection between z-wave and Plejd

Hi,
Thanks for a great product 😊
I’m having trouble with getting my plejd devices to react on signals from my Aeotec multi sensors. I connect everything with Homey Pro (latest firmware). I can’t get plejd devices to react when the motion sensor is triggered. If instead (as an example) use push notifications and exclude plejd, everything works fine. If I use the function "test flow" the lamps turns on/off but it doesn’t work in actual use.

Any ideas or solutions?

Homey Bridge (Beta)

Will this become avalible for Homey Bridge?

Plejd app freezes the Homey 2023 Testflight

When all Plejd devices are loaded into Homey, the app freezes. I can use the devices in flows and it works. I cannot edit or delete devices. Due to the fact that the Homey app freezes when entering the device page, I can no longer add other devices to Homey, nor can I remove the Plejd app from Homey.

Post comment: Finally managed to remove the Plejd app. I did some other app additions and then finally re-installed Plejd. Then everything went smooth. I assume the issues I had were related to Homey 2023 TestFlight rather then the Plejd app.

Problem with 2.0.2

I can longer control my Plejd devices. And the ”configure app” is no longer visible in the app.

Plejd relä ctr-01 funkar inte med Early 2018

Hej. Jag kan inte styra min plejdpuck men jag ser enheten och den blir gul och vit men inget händer. Jag kan styra den via min plejdapp. Jag har ingen gateway men det skulle ju funka utan. Har no nåt tips ? Är ganska ny på detta.

Changes in Plejd configuration

Hi
I have a Plejd system wich I recently have updated (renamed devices and added some new devices).

My problem is that updated/new devices don’t update in Homey?

What do I need to do to make the Homey Plejd app read the new configuration and reflect how the Plejd system looks like? I’ve tried to restart app, restart homey, but no changes in Homey.

Happy to get help how to solve this problem!
/Magnus

Dimming not available for CTR-01

Hi, I just installed a CRT-01 + RTR-01.
No problem adding it in Homey but dimming is not available. Just on/off.

Same issue in flows.
THEN:
Only options available are ON, OFF, TOGGLE ON/OFF

CTR-01 f/w 3.3.8
Plejd app v3.3.4
HP 2019, f/w 8.1.4

On/off status wrong if dimmer slider used.

Greetings. I just noticed a kind of small issue on a dim-01 device if I in homey iOS app or web app choose to adjust dim level to turn on the lamp. The status and on/off switch do not update to on but the lamp turns on at the dim level set. I see when I test some more devices I have some of them act like this others correct, so turning on the lamp by adjust dim level activates on/off button and show correct status. Sorry to miss I am running latest app on a homey early 2019pro

V7.0 rc14 så fungerar det inte igen

Dem var tillbaka och fungerade förra homey versionen nu är dem utslagna igen. Jag har märkt att dem fungerar ibland, men med mellan 30 sek och 5 min fördröjning

Don't work 7.2.0

Hi. Is quite new Homey University. Has recently installed / connected to several devices by Plejd. Have also connected / added these to Homey, but they do not work. Hope there any solution on this?? Do not know if this worked before 7.2.0.

Uninstall plejd connection in Homey

Hello,

Didn't manage go get the system to function, I manage to import all plejd unit into homey but it work to turnn on/off.

I understand that only one connection is possible to have with the units, so the plejd app can't any longer connect to the plejd units. How do I uninstall the app from homey to make my ordinary plejd app to work again? Tried to uninstall but it didn't work...

Plejd Devices became unavailable

Hi,

Have 26 Plejd devices connected to HP23 without hub. Has worked fine for 3 days but suddenly all devices became unavailable.
Diagnostic report: 1b9cc41b-399b-4f21-b47b-6b70c7770075

Issues with Homey Pro 2023 and Plejd.

Hi. I heard lots of good about your app but I can’t seem to figure out how to make it work.

When I add the Plejd app and then add the devices they all have a red triangle on them and it says something about an issue with Bluetooth.

I have restarted the app multiple times and installed and reinstalled the app multiple times with no luck.

I can’t see any documentation about how to fix this. I have understood that others have had issues as well.

I don’t want to be forced to buy another gateway to make it work. Do you have any ideas?

Plejd don't work any more V3.1.7 Homey V6.0.0 App 6.5.0.694

Since the new Homey Update, all Plejd devices no longer work.

• Restarting the app did not work.
• Delete all items and install them again, did not work.

Plejd did recognize the Items from the network.

Plejd app stop working.

Greetings. I am at the moment quite happy with the app but.

Currently running v 3.0.0 of Plejd app and it has stopped responding twice. It gives a paus sign in the homey app list. I just need to deactivate and then reactivate the app and all is back to fine. Unfortunately I have no more information.

appen kraschade

Hej.
Efter varje gång jag aktiverar eller avaktiverar något i plejd så hänger appen sig o sedan måste jag starta Om homeyn.
Vad gör jag för fel?

Cant login

Hello

Cant login to the app "de angivna inloggauppgifterna är inte giltiga" but i can login normal plejd app with my created account.

Pair session error nr 2. Some Times to.