techman_robot's Introduction

Deprecated !

For driver using TMFlow, see https://github.com/TechmanRobotInc
see also: tmr_ros1_dev and tmrlib_dev

techman_robot

A driver provides ROS support for techman robots. TM5_700 is available for ROS Indigo.

Overview

Action interface on /joint_trajectory_action for integration with MoveIt
Publishes robot joint state on /joint_states
Publishes TCP position on /tool_position
Publishes TCP velocity on /tool_velocity
Publishes TCP force on /wrench
Service call to set outputs on /tm_driver/set_io

Installation

First set up a catkin workspace (see this tutorials).
Then clone the repository into the src/ folder. It should look like /path/to/your/catkin_workspace/src/techman_robot.
Make sure to source the correct setup file according to your workspace hierarchy, then use catkin_make to compile.
Note that this package depends on hardware_interface, and controller_manager.

Usage with Moveit

test in simulation:

To bring up moveit environment in simulation mode, run:
roslaunch tm700_moveit_config tm700_moveit_planning_execution.launch

run with real robot:

set up networking:

Click on the network settings (double-arrow in the title bar) and select Edit Connections
Locate the new connection (mine was Wired Connection 1) and select Edit. Under the IPv4 tab, set:
- address = 192.168.0.11 (or similar)
- netmask = 255.255.255.0
Connect an ethernet cable and try to ping your connected robot:
- ping 192.168.0.10

To bring up moveit environment and connect to real robot, run:
roslaunch tm700_moveit_config tm700_moveit_planning_execution.launch sim:=False robot_ip:=192.168.0.10

Usage with Gazebo

To bring up the simulated robot in Gazebo, run:
roslaunch tm_gazebo tm700.launch

techman_robot's People

Contributors

Stargazers

Watchers

techman_robot's Issues

[tm_driver] Error: data length wrong!

I ran a node "tm_driver" to operate the real TM robot,
But I couldn't move it due to an error.

$ roslaunch tm700_moveit_config tm700_moveit_planning_execution.launch sim:=False \
 robot_ip:=192.168.0.10```
.
.
[ERROR] data length wrong!
[ERROR] data length wrong!
[ERROR] data length wrong!

Failed to call service get_planning_scene

Hi, recently I cloned this repository and try to

roslaunch tm700_moveit_config tm700_moveit_planning_execution.launch

but I met some problem in the following pictures:

it appearse NO PLANNING LIBRARY LOADED
this is the rqt_graph
However, I found out that if I use the older verion this repository, everythin went really well. Therefore, I'm not sure where gose wrong.
Many thanks.

kentsai0319 / techman_robot Goto Github PK