rjb0026/marti_messages

Supplemental ROS messages for MARTI

marti_messages

This repository provides various messages created at Southwest Reseach Institute's Intelligent Vehicle Systems section for working with Robot Operating System(ROS).

The master branch provides support for ROS 1 distributions; the ros2-devel branch provides support for ROS 2 distributions.

Installation

If you have installed ROS, you can install any of the packages in this repository with apt-get:

sudo apt-get install ros-${ROS_DISTRO}-<package>

Building From Source (ROS 1)

These directions assume you have already set up a catkin workspace. See this tutorial on the ROS Wiki for help setting up a catkin workspace.

Checking out the source code (wstool)

If you're using wstool, add this repository to your wstool workspace:

wstool set marti_messages --git https://github.com/swri-robotics/marti_messages.git

Checking out the source code (git)

If you're not using wstool, you can check out the repositories with git:

git clone https://github.com/swri-robotics/marti_messages.git

Installing dependencies and building

Install all of the dependencies using rosdep by running the following command from the root of your catkin workspace:

rosdep install --from-paths src --ignore-src

Build the workspace with catkin_make:

catkin_make